Best place is from the WIKI http://aprsisce.wikidot.com/downloads Also look at the development version option: http://aprsisce.wikidot.com/doc:development-version I also suggest joining the APRSISCE g

I was able to get my weather station to appear in APRSIS32 by adding the following to my upload destinations on my Meteobridge: You will need a APRS registration passcode using your callsign - I blank

If you look at the attached screen shot, I would like to figure out what might be causing this mess I think on of the paths may have a timimg issue (NC4HC-15) could this the problem? Thanks Rick, kd4d

In the lower-right quadrant of the screenshot is a local Igate/Digipeater, KG4DVE-1 . underneath the 146.94 TR object is " 8329mph ESE" . Occasionally I see something similar at his station, on the ma

Hello APRSISCE@groups.io Though I have Altitude checked, in several places, it is never displayed on the map. I wonder why that is. -- 73, KD7YZ Bob EM88LL

Hi everyone. I just got a Kenwood TM-D710ga and have been enjoying it. I’m trying to get some sort of APRS software running when I have the rig in the house. The first time I loaded up APRSICE I got a

Greetings..from India! I have just started using APRSIS32 again after a hiatus of 2 years, therefore there is something which I need to seek help for. First of all, about my installation: 1. Intel i5

Hi all, Anyone using APRSIS32 with VARA Soundmodem on HF? Is it possible? Has anyone attempted such a thing? I tried it using a KISS port connected to VARA via TCP port 8300 but there is no way to PTT

After years of reading about the inputting of NMEA data to APRSIS32, I thought I would see what's available, software-wise, to port data. I just got Android's ShareGPS to do so. Not understanding exac

I am still not able to use the GPS feature on APRSISCE32. I have tried numerous times and still to no avail. Looking at the upper left corner of the screen: Square about an inch and a quarter shows to

It seems that when I add a budlist filter to my APRS server configuration that uses a partial callsign and a wild card, APRSIS32 does not recognize any of the matching calls as buddies. We had an even

I am unable to STOP the incessant extra screen shows up everytime I see the local large digi-peater KG4 DVE -1 This all started today when I was ONLY seeing the beacon sent out by my DMR 2m radio ...w

Has anyone used this setup for ISS APRS? I have no issues running it locally on 144.390. I have to figure how to change the path to ARISS. Is there a way to have a profile for APRS and one for ARISS?

I can no get GPS data on the bottom of the display. The NMEA Log shows that APRS32 tried to open COM6 (only one available in a Win 10 Tablet) Opening with 4 Args, Got 1 Error 5, then repeats endlessly

Hello APRSISCE@groups.io I was wanting to send a packet/message to a friend 15 miles away via message when I bring up chat/message, I see only "SEND IS" where RF is greyed out. why is that? -- 73, KD7

Hi there, just a new member here in the great white north. I live in Peterborough Ontario CANADA. Peterborough is about 140 miles north east of Toronto. The Peterborough amateur radio club is an activ

On Halloween we ran an ARES event, Pumpkin Patrol, and had many of our posts run various cellphone APRS apps since few have RF rigs. I was using APRSIS via agwpe to igate the traffic to the RF only st

I am running Nexus DR-X on a Raspberry Pi and Fe-Pi audio card with 2 audio channels. This feeds into Direwolf the 2 audio channels decoded and sent using KISS over TCP/IP to APRSIS32. I only connecte

Today I was moving things around on my dest when I picked up the keyboard that's connected to my APRSIS32 computer. When I looked at the APRS screen, the map was white, no streets were visiable, only

I'm running APRISISCE under Windows as an iGATE (two way). A "Follow" window periodically pops up and I have been closing it manually. Is there a way to prevent this pop-up? TIA and 73, Don W. KD4APP