Topics

soundmodem and aprsi32


Jose Manuel Martinez Barbera
 



Someone has the configuration of aprs32 with soundmodem software for aprs hf


Rob Giuliano
 

As far as I know, there are no special settings within APRSIS32 for HF.
UZ7HO's SoundModem application is a sofwtare based TNC and its settings take care of the HF vs. VHF/UHF settings.
  You will hvae to check the UZ7HO manual for the proper settings for HF
These are not within APRSIS32.

To interface the UZ7HO SoundModem to APRSIS32, you have 2 options:
1. AGW port over TCP/IP  
    Menu >Configure >New Port ... 
       Port Type:    AGW
       Port Name:  UZ7HO                { or your choice}
       Hit  <Create> button
    Choose <TCP/IP>
       IP or DNS:    LocalHost          {IP address of computer running SoundModem}
       Port:              8000                   {Unless you have configured a different port}
2. KISS port over TCP/IP
    Menu >Configure >New Port ... 
       Port Type:    Simply(KISS)
       Port Name:  UZ7HO                { or your choice}
       Hit  <Create> button
    Choose <TCP/IP>
       IP or DNS:    LocalHost          {IP address of computer running SoundModem}
       Port:              8100                   {Unless you have configured a different port}

Good luck - let us know how it works out.

Robert Giuliano
KB8RCO



On Monday, January 20, 2020, 12:16:00 PM EST, Jose Manuel Martinez Barbera <ea8ee1@...> wrote:




Someone has the configuration of aprs32 with soundmodem software for aprs hf


Jose Manuel Martinez Barbera
 

If it works perfectly with the first agw option, tested in vhf, a question which hf frequencies and aprs modes can I use for testing


El lun., 20 ene. 2020 a las 22:44, Rob Giuliano via Groups.Io (<kb8rco=yahoo.com@groups.io>) escribió:
As far as I know, there are no special settings within APRSIS32 for HF.
UZ7HO's SoundModem application is a sofwtare based TNC and its settings take care of the HF vs. VHF/UHF settings.
  You will hvae to check the UZ7HO manual for the proper settings for HF
These are not within APRSIS32.

To interface the UZ7HO SoundModem to APRSIS32, you have 2 options:
1. AGW port over TCP/IP  
    Menu >Configure >New Port ... 
       Port Type:    AGW
       Port Name:  UZ7HO                { or your choice}
       Hit  <Create> button
    Choose <TCP/IP>
       IP or DNS:    LocalHost          {IP address of computer running SoundModem}
       Port:              8000                   {Unless you have configured a different port}
2. KISS port over TCP/IP
    Menu >Configure >New Port ... 
       Port Type:    Simply(KISS)
       Port Name:  UZ7HO                { or your choice}
       Hit  <Create> button
    Choose <TCP/IP>
       IP or DNS:    LocalHost          {IP address of computer running SoundModem}
       Port:              8100                   {Unless you have configured a different port}

Good luck - let us know how it works out.

Robert Giuliano
KB8RCO



On Monday, January 20, 2020, 12:16:00 PM EST, Jose Manuel Martinez Barbera <ea8ee1@...> wrote:




Someone has the configuration of aprs32 with soundmodem software for aprs hf


John Brent - VA7WPN
 

We have an HF APRS iGate setup on the following :

  Freq : 10.147.60 Mhz USB
   Mod : 300 baud
 Tones : 200 hz spacing centered on 1700kz

Were not using PSK, but it is possible and we may be implimenting it if testing at our location proves to be a success.

http://wa8lmf.net/APRS_PSK63/DualMode.htm

I hope this helps, I belive you have been using our setup, and I recognize your callsign as one we have gated.

John Brent
 VA7WPN