RF Port Status (was: Thanks for the add to the group! Quick question?)

Lynn Deffenbaugh

None of the packets in that scroller capture were received from RF, but they all came via your APRS-IS connection.

The *Int* means that the transmit was Internal and was not sent to any port.

You need to check out some of the Enables / View Logs / Port(<YourPortName>) to see what your RF port is doing, if anything.   You may also get a hint by the status above the scroller that should be alternating between APRS-IS Ok and <YourPortName> Ok.

Play with the Configure / Scroller / RF Only as well to restrict the packet scroller to only packets received from RF.   They will show up with an * beside the right column station ID.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 1/18/2023 6:02 PM, Mike Pelchat K2FAM via groups.io wrote:

 I believe I got everything up and running.  I’m using a Kantronics KPC 3 Plus and a Yaesu FTM-2980R with a Windows 10 Laptop.  As far as I can tell, I believe the IGate and Digipeater is working.  However, in the attached picture I get an “INT” in red when I transmit.  I have not been able to find what this means.  Just want to make sure it’s not an error.  Thank you very much for your help and time. 

Mike, K2FAM