When I go to Configure  Ports  MyNewPort  I see the Inherit box is checked but greyed out and there is no entry in MyCallssid box. Is this normal? I specified this information when I first started the software and I see the information when I go to Configure  General. Wondering if this is normal as my TinyTrak4 lights flash when I hear APRS traffic on my Yeasu FT857d radio but nothing is getting gated into the internet when I Transmit and the radio is not keying up. Wondering about the software side. I realize this is not a Yeasu forum. Thanks. Great software. I have used it years ago and am trying to resurect it on a new PC.


The Inherit and MyCallSSID box is a red herring. It was going
to be used, but I took the implementation in a different direction
but haven't updated the dialog box.
You need to better describe you configuration with the TT4 and
FT857d radio. Have you tuned the TT4's RXAMP setting? Have you
connected a terminal emulator to make sure that it is decoding
packets? Is the TT4 in the proper mode for the type of port you
configured in APRSIS32? If you enable the
Port(<YourPortName>) Trace Log in APRSIS32, what do you see
there?
How do you know "nothing is getting gated
into the internet"? And not keying up on transmit is a completely
different question, but you're better off getting the receive side
working first.
You might want to read the following two
pages and anything else on the Wiki that catches your attention.
Lynn (D)  KJ4ERJ  Author of APRSISCE
for Windows Mobile and Win32
toggle quoted messageShow quoted text
On 5/30/2022 5:06 PM, AB9NN  Jon
Kreski wrote:
When I go to Configure
 Ports  MyNewPort  I see the Inherit box is checked but
greyed out and there is no entry in MyCallssid box. Is this
normal? I specified this information when I first started the
software and I see the information when I go to Configure 
General. Wondering if this is normal as my TinyTrak4 lights
flash when I hear APRS traffic on my Yeasu FT857d radio but
nothing is getting gated into the internet when I Transmit and
the radio is not keying up. Wondering about the software side. I
realize this is not a Yeasu forum. Thanks. Great software. I
have used it years ago and am trying to resurect it on a new PC.


RE: You need to better describe you configuration with the TT4 and FT857d radio. Have you tuned the TT4's RXAMP setting? * I don't think I have, but I used this same TT4 years ago in Appleton, WI for APRS and it was working just fine for a couple of years. We moved and I changed computers and am now attempting to resurrect it. So I suspect that is not the issue. How do I tune the TT4 RXAMP setting? Have you connected a terminal emulator to make sure that it is decoding packets? * I have not. Will AGW Packet Engine work for this? Is there a better one that you suggest? I remember running AGW Packet Engine back in the dark ages but thought it was for something else. Is the TT4 in the proper mode for the type of port you configured in APRSIS32? * How do I check this to be sure? I think it is in KISS mode but I can't verify this. When the radio hears APRS traffic the lights blink on the TT4 so I think the connection from the radio to the TT4 is working. My port is configured as KISS. How do you know "nothing is getting gated into the internet"?
* I run a Yeasu FTM400XDR with APRS active in my car. As I am testing I go out to the car and Beacon TX and nothing shows up on the map. The same is true if I just drive around a bit.
If you enable the Port(<YourPortName>) Trace Log in APRSIS32, what do you see there?
* Here is some output from it: WinMain:20220530T20:09:41.083 Starting Port(Yeasu FT857d) Port(Yeasu FT857d):20220530T20:09:41.083 CpReader Running on COM5:19200,N,8,1 (6 OpenCmds, 4 CloseCmds) Port(Yeasu FT857d):20220530T20:09:41.084 Opening COM5:19200,N,8,1 Port(Yeasu FT857d):20220530T20:09:41.084 Opening COM5 with 4 Args Port(Yeasu FT857d):20220530T20:09:41.101 Opened COM5:19200,N,8,1, Flushing 0 in TransmitQueue, Sending 6 OpenCmds Port(Yeasu FT857d):20220530T20:09:42.105 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:09:43.118 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:09:44.875 Missed Expected Response(cmd:) From Command(XFLOW OFF) Port(Yeasu FT857d):20220530T20:09:46.887 Missed Expected Response(cmd:) From Command(FULLDUP OFF) Port(Yeasu FT857d):20220530T20:09:47.901 Missed Expected Response(cmd:) From Command(KISS ON) WinMain:20220530T20:11:12.454 Stopping Port(Yeasu FT857d) WinMain:20220530T20:11:12.454 Waiting at line 742 WinMain:20220530T20:11:12.568 Waiting at line 742 WinMain:20220530T20:11:12.675 Waiting at line 742 Port(Yeasu FT857d):20220530T20:11:12.690 Terminating after 30637 msec vs 0 Quiet Port(Yeasu FT857d):20220530T20:11:12.690 Closing COM5:19200,N,8,1 WinMain:20220530T20:11:12.781 Waiting at line 2877 WinMain:20220530T20:11:12.888 Waiting at line 2877 WinMain:20220530T20:11:12.995 Waiting at line 2877 WinMain:20220530T20:11:13.100 Waiting at line 2877 WinMain:20220530T20:11:13.205 Waiting at line 2877 WinMain:20220530T20:11:13.310 Waiting at line 2877 WinMain:20220530T20:11:13.415 Waiting at line 2877 WinMain:20220530T20:11:13.520 Waiting at line 2877 WinMain:20220530T20:11:13.626 Waiting at line 2877 Port(Yeasu FT857d):20220530T20:11:13.701 Missed Expected Response(TS 1) From Command(TC 1!TS 1) WinMain:20220530T20:11:13.732 Waiting at line 2877 WinMain:20220530T20:11:13.837 Waiting at line 2877 WinMain:20220530T20:11:13.942 Waiting at line 2877 WinMain:20220530T20:11:14.047 Waiting at line 2877 WinMain:20220530T20:11:14.152 Waiting at line 2877 WinMain:20220530T20:11:14.259 Waiting at line 2877 WinMain:20220530T20:11:14.364 Waiting at line 2877 WinMain:20220530T20:11:14.470 Waiting at line 2877 WinMain:20220530T20:11:14.577 Waiting at line 2877 WinMain:20220530T20:11:14.683 Waiting at line 2877 Port(Yeasu FT857d):20220530T20:11:14.714 Missed Expected Response(TN 2,0) From Command(TN 2,0!TN 2,0) WinMain:20220530T20:11:14.792 Waiting at line 2877 Port(Yeasu FT857d):20220530T20:11:14.824 Reader Exiting WinMain:20220530T20:11:14.902 Starting Port(Yeasu FT857d) Port(Yeasu FT857d):20220530T20:11:14.902 CpReader Running on COM5:19200,N,8,1 (6 OpenCmds, 4 CloseCmds) Port(Yeasu FT857d):20220530T20:11:14.902 Opening COM5:19200,N,8,1 Port(Yeasu FT857d):20220530T20:11:14.902 Opening COM5 with 4 Args Port(Yeasu FT857d):20220530T20:11:14.913 Opened COM5:19200,N,8,1, Flushing 0 in TransmitQueue, Sending 6 OpenCmds Port(Yeasu FT857d):20220530T20:11:15.916 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:11:16.930 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:11:17.946 Missed Expected Response(cmd:) From Command(XFLOW OFF) Port(Yeasu FT857d):20220530T20:11:18.959 Missed Expected Response(cmd:) From Command(FULLDUP OFF) Port(Yeasu FT857d):20220530T20:11:20.971 Missed Expected Response(cmd:) From Command(KISS ON) Port(Yeasu FT857d):20220530T21:44:16.618 Flushing 4095/4096 Bytes In Buffer Port(Yeasu FT857d):20220530T22:39:07.570 Flushing 4095/4096 Bytes In Buffer WinMain:20220531T12:18:43.616 Logging Enabled Port(Yeasu FT857d):20220531T12:18:44.389 KISS:Not long enough (Need 18)[198]:<00 00 80 80 80 80>x<C0 00>x<00 80 80 80 00 00 00>x<C0 80 80 00 00 00 80 80>x<00 F8 00>x<C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:44.993 KISS:Not long enough (Need 18)[190]:<00>x<00 80 80 80 00 00 00>x<C0 80 80 00 00 00 80 80>x<00 F8 00>x<C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:45.598 KISS:Ignoring SMACK Checksum[179]:<80 80 00 00 00 80 80>x<00 F8 00>x<C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:45.598 KISS:Not long enough (Need 18)[179]:<80 80 00 00 00 80 80>x<00 F8 C0 C0 C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:47.422 KISS:Missing 03 F0[166]:<00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:48.029 KISS:Missing 0, found C0[131]:<F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.239 KISS:Not long enough (Need 18)[89]:<00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.842 KISS:Ignoring SMACK Checksum[75]:<80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.842 KISS:Processing MultiPort[4] as 0[75]:<C0 C0 C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.842 KISS:Not long enough (Need 18)[75]:<C0 C0 C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:51.652 KISS:Missing 0, found C0[72]:x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:52.858 KISS:Not long enough (Need 18)[70]:<00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:53.463 KISS:Missing 0, found C0[65]:x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:54.683 KISS:Ignoring SMACK Checksum[63]:<80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:54.683 KISS:Processing MultiPort[4] as 0[63]:<C0 C0 C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:54.683 KISS:Not long enough (Need 18)[63]:<C0 C0 C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:56.496 KISS:Missing 03 F0[60]:<00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:57.102 KISS:Missing 0, no C0[23]:<F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00>
Thanks for your patience!


Start with 2 from the attached log: 1. You are using a KISS port with OPEN and CLOSE commands on a TNC that does not require them. Port(Yeasu FT857d):20220530T20:09:41.083 CpReader Running on COM5:19200,N,8,1 (6 OpenCmds, 4 CloseCmds)
Delete that port, and create a new Simply(KISS) port in APRSIS32.
This will create a port without any extra commands. Those commands will not put the TT4 into KISS mode. You need to do that in a terminal emulator (see below).
2. What are the port settings of the TT4? Should be the computer connection is ?MODE KISS and ?BAUD 19200 (where ? is either A or B). You do get some <C0> (KISS) indication, but it doesn't seem to be at the start of the packet. You may be missing the start of packets. Are you running CDMODE TONES?
Running through the other comments: RXAMP There is a TT4 Quick Start Guide that outlines the steps to configure the audio interface to the radio. If your configuration was working with the FT857D, it may be setup. If you were using a different radio, you will likely need to make adjustments.
Although AGW can be used on the
computer "between" the TNC and other applications, this just adds a
layer of complexity for troubleshooting. AGW is not a terminal program. Something like TeraTerm Pro, PuTTY, Real Term, or the like are terminal programs that will read data from the Serial Port (COM5, 19200,n,8,1 settings), and make it visible on the screen. NOTE: the TT4 should be in TEXT mode to make this data readable. Change it to KISS after you are sure it is working. IMPORTANT: Only 1 application can connect to a physical COM port at a time. You must shut down applications before starting the next one that uses the COM5 port.
After verifying (setting) the TT4 audio and confirming with the terminal emulator that is is decoding, set ?MODE KISS (again ? to port connected to the computer) to put the TT4 into KISS mode all the time.
toggle quoted messageShow quoted text
On Tuesday, May 31, 2022, 08:34:42 AM EDT, AB9NN  Jon Kreski <jkreski@...> wrote:
RE: You need to better describe you configuration with the TT4 and FT857d radio. Have you tuned the TT4's RXAMP setting? * I don't think I have, but I used this same TT4 years ago in Appleton, WI for APRS and it was working just fine for a couple of years. We moved and I changed computers and am now attempting to resurrect it. So I suspect that is not the issue. How do I tune the TT4 RXAMP setting? Have you connected a terminal emulator to make sure that it is decoding packets? * I have not. Will AGW Packet Engine work for this? Is there a better one that you suggest? I remember running AGW Packet Engine back in the dark ages but thought it was for something else. Is the TT4 in the proper mode for the type of port you configured in APRSIS32? * How do I check this to be sure? I think it is in KISS mode but I can't verify this. When the radio hears APRS traffic the lights blink on the TT4 so I think the connection from the radio to the TT4 is working. My port is configured as KISS. How do you know "nothing is getting gated into the internet"?
* I run a Yeasu FTM400XDR with APRS active in my car. As I am testing I go out to the car and Beacon TX and nothing shows up on the map. The same is true if I just drive around a bit.
If you enable the Port(<YourPortName>) Trace Log in APRSIS32, what do you see there?
* Here is some output from it: WinMain:20220530T20:09:41.083 Starting Port(Yeasu FT857d) Port(Yeasu FT857d):20220530T20:09:41.083 CpReader Running on COM5:19200,N,8,1 (6 OpenCmds, 4 CloseCmds) Port(Yeasu FT857d):20220530T20:09:41.084 Opening COM5:19200,N,8,1 Port(Yeasu FT857d):20220530T20:09:41.084 Opening COM5 with 4 Args Port(Yeasu FT857d):20220530T20:09:41.101 Opened COM5:19200,N,8,1, Flushing 0 in TransmitQueue, Sending 6 OpenCmds Port(Yeasu FT857d):20220530T20:09:42.105 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:09:43.118 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:09:44.875 Missed Expected Response(cmd:) From Command(XFLOW OFF) Port(Yeasu FT857d):20220530T20:09:46.887 Missed Expected Response(cmd:) From Command(FULLDUP OFF) Port(Yeasu FT857d):20220530T20:09:47.901 Missed Expected Response(cmd:) From Command(KISS ON) WinMain:20220530T20:11:12.454 Stopping Port(Yeasu FT857d) WinMain:20220530T20:11:12.454 Waiting at line 742 WinMain:20220530T20:11:12.568 Waiting at line 742 WinMain:20220530T20:11:12.675 Waiting at line 742 Port(Yeasu FT857d):20220530T20:11:12.690 Terminating after 30637 msec vs 0 Quiet Port(Yeasu FT857d):20220530T20:11:12.690 Closing COM5:19200,N,8,1 WinMain:20220530T20:11:12.781 Waiting at line 2877 WinMain:20220530T20:11:12.888 Waiting at line 2877 WinMain:20220530T20:11:12.995 Waiting at line 2877 WinMain:20220530T20:11:13.100 Waiting at line 2877 WinMain:20220530T20:11:13.205 Waiting at line 2877 WinMain:20220530T20:11:13.310 Waiting at line 2877 WinMain:20220530T20:11:13.415 Waiting at line 2877 WinMain:20220530T20:11:13.520 Waiting at line 2877 WinMain:20220530T20:11:13.626 Waiting at line 2877 Port(Yeasu FT857d):20220530T20:11:13.701 Missed Expected Response(TS 1) From Command(TC 1!TS 1) WinMain:20220530T20:11:13.732 Waiting at line 2877 WinMain:20220530T20:11:13.837 Waiting at line 2877 WinMain:20220530T20:11:13.942 Waiting at line 2877 WinMain:20220530T20:11:14.047 Waiting at line 2877 WinMain:20220530T20:11:14.152 Waiting at line 2877 WinMain:20220530T20:11:14.259 Waiting at line 2877 WinMain:20220530T20:11:14.364 Waiting at line 2877 WinMain:20220530T20:11:14.470 Waiting at line 2877 WinMain:20220530T20:11:14.577 Waiting at line 2877 WinMain:20220530T20:11:14.683 Waiting at line 2877 Port(Yeasu FT857d):20220530T20:11:14.714 Missed Expected Response(TN 2,0) From Command(TN 2,0!TN 2,0) WinMain:20220530T20:11:14.792 Waiting at line 2877 Port(Yeasu FT857d):20220530T20:11:14.824 Reader Exiting WinMain:20220530T20:11:14.902 Starting Port(Yeasu FT857d) Port(Yeasu FT857d):20220530T20:11:14.902 CpReader Running on COM5:19200,N,8,1 (6 OpenCmds, 4 CloseCmds) Port(Yeasu FT857d):20220530T20:11:14.902 Opening COM5:19200,N,8,1 Port(Yeasu FT857d):20220530T20:11:14.902 Opening COM5 with 4 Args Port(Yeasu FT857d):20220530T20:11:14.913 Opened COM5:19200,N,8,1, Flushing 0 in TransmitQueue, Sending 6 OpenCmds Port(Yeasu FT857d):20220530T20:11:15.916 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:11:16.930 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:11:17.946 Missed Expected Response(cmd:) From Command(XFLOW OFF) Port(Yeasu FT857d):20220530T20:11:18.959 Missed Expected Response(cmd:) From Command(FULLDUP OFF) Port(Yeasu FT857d):20220530T20:11:20.971 Missed Expected Response(cmd:) From Command(KISS ON) Port(Yeasu FT857d):20220530T21:44:16.618 Flushing 4095/4096 Bytes In Buffer Port(Yeasu FT857d):20220530T22:39:07.570 Flushing 4095/4096 Bytes In Buffer WinMain:20220531T12:18:43.616 Logging Enabled Port(Yeasu FT857d):20220531T12:18:44.389 KISS:Not long enough (Need 18)[198]:<00 00 80 80 80 80>x<C0 00>x<00 80 80 80 00 00 00>x<C0 80 80 00 00 00 80 80>x<00 F8 00>x<C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:44.993 KISS:Not long enough (Need 18)[190]:<00>x<00 80 80 80 00 00 00>x<C0 80 80 00 00 00 80 80>x<00 F8 00>x<C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:45.598 KISS:Ignoring SMACK Checksum[179]:<80 80 00 00 00 80 80>x<00 F8 00>x<C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:45.598 KISS:Not long enough (Need 18)[179]:<80 80 00 00 00 80 80>x<00 F8 C0 C0 C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:47.422 KISS:Missing 03 F0[166]:<00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:48.029 KISS:Missing 0, found C0[131]:<F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.239 KISS:Not long enough (Need 18)[89]:<00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.842 KISS:Ignoring SMACK Checksum[75]:<80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.842 KISS:Processing MultiPort[4] as 0[75]:<C0 C0 C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.842 KISS:Not long enough (Need 18)[75]:<C0 C0 C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:51.652 KISS:Missing 0, found C0[72]:x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:52.858 KISS:Not long enough (Need 18)[70]:<00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:53.463 KISS:Missing 0, found C0[65]:x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:54.683 KISS:Ignoring SMACK Checksum[63]:<80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:54.683 KISS:Processing MultiPort[4] as 0[63]:<C0 C0 C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:54.683 KISS:Not long enough (Need 18)[63]:<C0 C0 C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:56.496 KISS:Missing 03 F0[60]:<00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:57.102 KISS:Missing 0, no C0[23]:<F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00>
Thanks for your patience!


Robert, thank you for the instructions and clarifications. I was able to delete the port and create the new one. The radio behaves better using the new port. With the old port when I switched back to Memory mode on the radio it was in transmit mode and would not stop. This cured that.
I found that I did have TeraTerm Pro on my PC and was able to connect to the TT4 and get into the options menu. the following are my results. I saw that both ABaud and BBaud were set at 4800 while my port was at 19200. I changed both ABAUD and BBAUD to 19200 which is the TT4 default and matches both the port setting in Device Manager and in APRSIS32.
:amode AMODE is KISS :abaud ABAUD is 4800 :bmode BMODE is KISS :bbaud BBAUD is 4800 :abaud 19200 ABAUD was 4800 ABAUD is 19200 :bbaud 19200 BBAUD was 4800 BBAUD is 19200 :abaud ABAUD is 19200 :bbaud BBAUD is 19200
I think it is working as my base station is now hearing APRS traffic per the map on APRSIS from quite a distance. I also did a test beacon from my car and that seems to be snowing up. THANKS! I will let you know if I have any further questions. Good to get some of the cob webbs off of the old software and see it working again! 73!
toggle quoted messageShow quoted text
Start with 2 from the attached log: 1. You are using a KISS port with OPEN and CLOSE commands on a TNC that does not require them. Port(Yeasu FT857d):20220530T20:09:41.083 CpReader Running on COM5:19200,N,8,1 (6 OpenCmds, 4 CloseCmds)
Delete that port, and create a new Simply(KISS) port in APRSIS32.
This will create a port without any extra commands. Those commands will not put the TT4 into KISS mode. You need to do that in a terminal emulator (see below).
2. What are the port settings of the TT4? Should be the computer connection is ?MODE KISS and ?BAUD 19200 (where ? is either A or B). You do get some <C0> (KISS) indication, but it doesn't seem to be at the start of the packet. You may be missing the start of packets. Are you running CDMODE TONES?
Running through the other comments: RXAMP There is a TT4 Quick Start Guide that outlines the steps to configure the audio interface to the radio. If your configuration was working with the FT857D, it may be setup. If you were using a different radio, you will likely need to make adjustments.
Although AGW can be used on the
computer "between" the TNC and other applications, this just adds a
layer of complexity for troubleshooting. AGW is not a terminal program. Something like TeraTerm Pro, PuTTY, Real Term, or the like are terminal programs that will read data from the Serial Port (COM5, 19200,n,8,1 settings), and make it visible on the screen. NOTE: the TT4 should be in TEXT mode to make this data readable. Change it to KISS after you are sure it is working. IMPORTANT: Only 1 application can connect to a physical COM port at a time. You must shut down applications before starting the next one that uses the COM5 port.
After verifying (setting) the TT4 audio and confirming with the terminal emulator that is is decoding, set ?MODE KISS (again ? to port connected to the computer) to put the TT4 into KISS mode all the time.
On Tuesday, May 31, 2022, 08:34:42 AM EDT, AB9NN  Jon Kreski < jkreski@...> wrote:
RE: You need to better describe you configuration with the TT4 and FT857d radio. Have you tuned the TT4's RXAMP setting? * I don't think I have, but I used this same TT4 years ago in Appleton, WI for APRS and it was working just fine for a couple of years. We moved and I changed computers and am now attempting to resurrect it. So I suspect that is not the issue. How do I tune the TT4 RXAMP setting? Have you connected a terminal emulator to make sure that it is decoding packets? * I have not. Will AGW Packet Engine work for this? Is there a better one that you suggest? I remember running AGW Packet Engine back in the dark ages but thought it was for something else. Is the TT4 in the proper mode for the type of port you configured in APRSIS32? * How do I check this to be sure? I think it is in KISS mode but I can't verify this. When the radio hears APRS traffic the lights blink on the TT4 so I think the connection from the radio to the TT4 is working. My port is configured as KISS. How do you know "nothing is getting gated into the internet"?
* I run a Yeasu FTM400XDR with APRS active in my car. As I am testing I go out to the car and Beacon TX and nothing shows up on the map. The same is true if I just drive around a bit.
If you enable the Port(<YourPortName>) Trace Log in APRSIS32, what do you see there?
* Here is some output from it: WinMain:20220530T20:09:41.083 Starting Port(Yeasu FT857d) Port(Yeasu FT857d):20220530T20:09:41.083 CpReader Running on COM5:19200,N,8,1 (6 OpenCmds, 4 CloseCmds) Port(Yeasu FT857d):20220530T20:09:41.084 Opening COM5:19200,N,8,1 Port(Yeasu FT857d):20220530T20:09:41.084 Opening COM5 with 4 Args Port(Yeasu FT857d):20220530T20:09:41.101 Opened COM5:19200,N,8,1, Flushing 0 in TransmitQueue, Sending 6 OpenCmds Port(Yeasu FT857d):20220530T20:09:42.105 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:09:43.118 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:09:44.875 Missed Expected Response(cmd:) From Command(XFLOW OFF) Port(Yeasu FT857d):20220530T20:09:46.887 Missed Expected Response(cmd:) From Command(FULLDUP OFF) Port(Yeasu FT857d):20220530T20:09:47.901 Missed Expected Response(cmd:) From Command(KISS ON) WinMain:20220530T20:11:12.454 Stopping Port(Yeasu FT857d) WinMain:20220530T20:11:12.454 Waiting at line 742 WinMain:20220530T20:11:12.568 Waiting at line 742 WinMain:20220530T20:11:12.675 Waiting at line 742 Port(Yeasu FT857d):20220530T20:11:12.690 Terminating after 30637 msec vs 0 Quiet Port(Yeasu FT857d):20220530T20:11:12.690 Closing COM5:19200,N,8,1 WinMain:20220530T20:11:12.781 Waiting at line 2877 WinMain:20220530T20:11:12.888 Waiting at line 2877 WinMain:20220530T20:11:12.995 Waiting at line 2877 WinMain:20220530T20:11:13.100 Waiting at line 2877 WinMain:20220530T20:11:13.205 Waiting at line 2877 WinMain:20220530T20:11:13.310 Waiting at line 2877 WinMain:20220530T20:11:13.415 Waiting at line 2877 WinMain:20220530T20:11:13.520 Waiting at line 2877 WinMain:20220530T20:11:13.626 Waiting at line 2877 Port(Yeasu FT857d):20220530T20:11:13.701 Missed Expected Response(TS 1) From Command(TC 1!TS 1) WinMain:20220530T20:11:13.732 Waiting at line 2877 WinMain:20220530T20:11:13.837 Waiting at line 2877 WinMain:20220530T20:11:13.942 Waiting at line 2877 WinMain:20220530T20:11:14.047 Waiting at line 2877 WinMain:20220530T20:11:14.152 Waiting at line 2877 WinMain:20220530T20:11:14.259 Waiting at line 2877 WinMain:20220530T20:11:14.364 Waiting at line 2877 WinMain:20220530T20:11:14.470 Waiting at line 2877 WinMain:20220530T20:11:14.577 Waiting at line 2877 WinMain:20220530T20:11:14.683 Waiting at line 2877 Port(Yeasu FT857d):20220530T20:11:14.714 Missed Expected Response(TN 2,0) From Command(TN 2,0!TN 2,0) WinMain:20220530T20:11:14.792 Waiting at line 2877 Port(Yeasu FT857d):20220530T20:11:14.824 Reader Exiting WinMain:20220530T20:11:14.902 Starting Port(Yeasu FT857d) Port(Yeasu FT857d):20220530T20:11:14.902 CpReader Running on COM5:19200,N,8,1 (6 OpenCmds, 4 CloseCmds) Port(Yeasu FT857d):20220530T20:11:14.902 Opening COM5:19200,N,8,1 Port(Yeasu FT857d):20220530T20:11:14.902 Opening COM5 with 4 Args Port(Yeasu FT857d):20220530T20:11:14.913 Opened COM5:19200,N,8,1, Flushing 0 in TransmitQueue, Sending 6 OpenCmds Port(Yeasu FT857d):20220530T20:11:15.916 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:11:16.930 Missed Expected Response(cmd:) From Command(^M~) Port(Yeasu FT857d):20220530T20:11:17.946 Missed Expected Response(cmd:) From Command(XFLOW OFF) Port(Yeasu FT857d):20220530T20:11:18.959 Missed Expected Response(cmd:) From Command(FULLDUP OFF) Port(Yeasu FT857d):20220530T20:11:20.971 Missed Expected Response(cmd:) From Command(KISS ON) Port(Yeasu FT857d):20220530T21:44:16.618 Flushing 4095/4096 Bytes In Buffer Port(Yeasu FT857d):20220530T22:39:07.570 Flushing 4095/4096 Bytes In Buffer WinMain:20220531T12:18:43.616 Logging Enabled Port(Yeasu FT857d):20220531T12:18:44.389 KISS:Not long enough (Need 18)[198]:<00 00 80 80 80 80>x<C0 00>x<00 80 80 80 00 00 00>x<C0 80 80 00 00 00 80 80>x<00 F8 00>x<C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:44.993 KISS:Not long enough (Need 18)[190]:<00>x<00 80 80 80 00 00 00>x<C0 80 80 00 00 00 80 80>x<00 F8 00>x<C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:45.598 KISS:Ignoring SMACK Checksum[179]:<80 80 00 00 00 80 80>x<00 F8 00>x<C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:45.598 KISS:Not long enough (Need 18)[179]:<80 80 00 00 00 80 80>x<00 F8 C0 C0 C0 00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:47.422 KISS:Missing 03 F0[166]:<00>x<00 F8 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<00 F8 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:48.029 KISS:Missing 0, found C0[131]:<F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00 00 00 80 00 00 00 80 80>x<00 FF 80 00 80 00>x<00>x<C0 00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.239 KISS:Not long enough (Need 18)[89]:<00 00 00 80 80>x<00 FF 80 00 80 00>x<C0 80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.842 KISS:Ignoring SMACK Checksum[75]:<80>x<C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.842 KISS:Processing MultiPort[4] as 0[75]:<C0 C0 C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:49.842 KISS:Not long enough (Need 18)[75]:<C0 C0 C0>x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:51.652 KISS:Missing 0, found C0[72]:x<C0 00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:52.858 KISS:Not long enough (Need 18)[70]:<00 00 00>x<C0>x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:53.463 KISS:Missing 0, found C0[65]:x<C0 80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:54.683 KISS:Ignoring SMACK Checksum[63]:<80>x<C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:54.683 KISS:Processing MultiPort[4] as 0[63]:<C0 C0 C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:54.683 KISS:Not long enough (Need 18)[63]:<C0 C0 C0 00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:56.496 KISS:Missing 03 F0[60]:<00>x<00 87 80>x<FC 80 80 80 00 00 80>x<00 7F 00 07 FC>x<00>x<<0F F8>x<FC 00 00 00>x<<0F 80 F8>x<C0 F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00> Port(Yeasu FT857d):20220531T12:18:57.102 KISS:Missing 0, no C0[23]:<F8>x<<F0>x<00 87>x<<F0 80>x<<00>x<FC>x<FC>x<00 87 80 00>
Thanks for your patience!

