Keep It Simple, Stupid [was: APRSIS with PK232]


Arte Booten
 

The following is from pages 27-28 of "TECHNICAL REFERENCE MANUAL MODEL PK-232 DATA CONTROLLER"

4.7.1

Starting "KISS" TNC Operation

Before entering the KISS mode, set the PK-232 for hardware flow control on the host side of the RS-232 link.
Type the following parameter values from the human or verbose mode:
AWLEN 8
PARITY 0
RESTART
CONMODE TRANS
TRACE OFF
HID OFF
BEACON EVERY 0
PACKET
RAWHDLC ON
HPOLL OFF
PPERSIST ON
KISS ON
HOST ON


Joel Christiansen
 

Thanks Arte !

That got me going !!! 

Its been a while since I used the pk-232.

Thanks, Joel