toggle quoted messageShow quoted text
The scrolling list on the left side of the window is not the
APRS-IS packet stream, but is the total packet stream being
processed by APRSISCE/32. To see just the APRS-IS stream, you
have to look at the Port(APRS-IS) scrolling log.
I suspect that if you bring up the Transmit scrolling log and
enable it, you will find that the telemetry is in fact an internal
If you don't want to see it in the scroller, then check Configure
/ Scroller / No Internals.
Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
I am seeing this packet in the APRS-IS packet stream window
(print screen attached) for my primary station VU3NUF.
'Telemetry is controlled via Enables / Telemetry
Enabled or via the Telemetry checkbox in a port definition
dialog' - I have disabled the telemetry option both in
Enables-->Telemetry Enabled and Ports-->APRS-IS (print
screen attached) but this beacon is still showing up in the
APRS-IS stream window.
On Wednesday, November 28, 2018, 8:28:30 PM GMT+5:30,
Robert Bruninga bruninga@...
That is the
When I click on transmit or let
the beacons generate at the beacon
interval, 2 beacons are being generated:
Is there a way to disable the
2nd beacon? This sometimes shows in aprs.fi as
well, whereas at other times does not
Also, any neighbor packet which
I receive does not ever show the 2nd
beacon type in their regard. I wonder
what setting has caused the 2nd beacon
type to originate. About 2 weeks back,
it was not there.