Wow, you aren’t kidding about the lack of traffic! - 73 Mike N3LI -

Perhaps he could subscribe to the group with his new address? What am I missing here? - 73 Mike N3LI -

I agree. I’m going to search for an older version of WINE. My old version worked well, and they replaced it with a mess, at least as far as USB to serial adapters are concerned. Software senescence ar

Hi Rob, WINES’s handling of com ports flummoxed me. What used to be a simple symbolic link became something else indeed ver 2.8 and later. The people at Codeweavers tried to help, but they had instruc

No. I want to run the program on a laptop running standard Windows in my vehicle. It’s a rebranded Pharos GPS-360. It interfaces with the computer rather than directly to the radio. The device also ha

Has anyone in here set up mobile operations with APRSISCE? Radio would be a D-700, and if possible, I’d like to use my Microsoft GPS receiver/antenna. - 73 Mike N3LI -

You do know who you are calling snide don’t you? I suggest that you ask for your money back. As for the wrong group, I dunno, this place is full of helpful people. In open source world, it’s almost al

Okay, I found the email problem. For some reason a majority of the posts in the aprsisce yahoo group were being sent to my junk mail folder. My reader is now happy with all the group postings - I have

Final update. The problem was not with my audio levels. The problem was with the USB to Serial adapter as supplied by West mountain Radio. This adapter required both RTS and DTR to be enabled in order

Okay, I apologize - I noted that I'm using Soundmodem in my setup, but guess I wasn’t wasn’t completely clear on that. These instructions are definitely for something else. I’m happy to switch program

Hi Stephen - the audio portion is working FB. My problem is that as soon as I select the serial port and accept it, the radio goes into transmit mode, and the only way to shut it off is to select none

Well, I not only used the wrong device, but spelled it wrong as well

I’m certain this will prove me the town idiot, but I’m attempting to set up APRSisce/32 with my Icom 746 and a Rigblaster nomic. Tried two different computers - a little Insignia Flex, and an HP Envy

Thanks! - 73 Mike N3LI -

Looks like yahoo is resending earlier posts again. Tks much for the reply. I’ve done some searching, and apparently Pharos hasn’t updated the drivers for Windows 10. Fortunately I’ve been able to inst

It is being seen and connecting on the XP machine. I’ll do the Linux version later. Thanks for the help, all. - 73 Mike N3LI -

It’s a clear base, Microsoft branded, roughly 2 by 2 inches, and a USB cable plug on one side, and a 12 pin flat connector on the other side. The pins must be doubled up because the GRP receiver only

Looks like Windows planned obsolescence got me on the Windows W10 side. The computer recognizes the device as a com port and with the correct name. But it has the dreaded exclamation point, and while

I’ve been looking for the menu item to enable my USB GPS Receiver, but not having luck. I see some TCP, Bluetooth, and Serial Com port. Is there an enable for USB? - 73 Mike N3LI -

Is APRISCE appropriate for mobile operations? At present, I use APRSPoint, which works, but is getting really long in the tooth, and as far as I know, won’t get any more updated maps. It also has a RA