Every time the program starts, it creates a new one? It's fine that it is saving stuff for next run, but is it necessary to have a new file every time??? On older computers with limited disk space, al

I have all logging that I am aware of turned off, and yet a log keeps getting saved. Here is the beginning of a log (attached). Config:WinMain:2022-01-21T19:48:02.456 LoadXmlConfiguration(APRSIS32.xml

I am reasonably sure I messed up the settings in one of my IGates, and it won't send Ack's back when a message is sent from nearby stations. It should be an easy fix, but there is nothing like testing

What about the parameters in the APRSISCE.xml file like: <Stations.MinAge>50</Stations.MinAge> <Stations.MaxAge>60</Stations.MaxAge> <Stations.MaxAge.Buddy>0</Stations.MaxAge.Buddy> I've changed my pa

Can you provide a screen shot with the map at a large enough scale to see "everything"? I have thoughts, and I'm sure others do as well, be at the moment we have so little information to go on that I

Yes, I have remote access set up. The problem becomes one of not having any stations I can relay through that can reach it. I can use Remote Access when I'm there to avoid walking that last 300 yards,

As far as I can tell, the only difference between being picked up as intended by APRSISce is the leading zero if the parameter is negative less than zero. So, -.644 does not work, and I believe -0.644

According to the APRS 101 specification http://www.aprs.org/doc/APRS101.PDF Page 70, the specification calls for a decimal point after EQNS. Here's from the specification. Example:N0QBF-11 :EQNS.0,5.2

I think I may have done something outside the specification, or there is an error somewhere. I changed telemetry EQNS to remove some leading zeros, and APRSISCE doesn't pick the values out. What I am

When Telemetry Parameters are received from as station such as EQNS, they go into the configuration file. How long will the parameters remain there assuming they aren't refreshed? One of my stations o

Can't the displayed name just be changed to KISS (Kenwood)? So the only change is what the user sees when selecting KISS. That's my thought, but it's never just that simple. Arnold, KQ6DI

I keep most non-APRS stations off my map with -u/APBM*/APDG*/APWL*/APJI* This also prevents my IGate from sending positions from these stations (even though it's DireWolf). I hadn't thought about elim

Maybe a better location is WA6ODP-2 where I DO send telemetry on RF (once an hour to RF). The data is more difficult to understand here, but more than 3 characters... Arnold, KQ6DI

I send 4 characters in telemetry 'bytes'. Check raw data from WA6ODP-4. So power supply voltage today is reading 1392, and in the cabinet temperature (Ambient) is 1088 (108.8° ). I've been doing it th

James, What I believe worked, was: Clearing the Paired Devices in the TH-D74. Menu 931, manual page 18-2. Only enable KISS through Bluetooth. Menu 983. I have the others off. In my PC, I needed to rem

I started this thread, then complained about Bluetooth, but I finally got it working. I'm not sure how I finally got the computer to talk with the TH-D74, but that was the only issue. I believe, I cle

Wow. I've always had so many problems with Bluetooth, and today is no different. I had the TH-D74 connected to the PC via Bluetooth, and now that I try to set it up for APRSIS32, Bluetooth won't conne

Mitch, Is the Port in APRSIS32 set for "Simply(KISS)" or "KISS". Arnold, KQ6DI

I did some searching, but I don't think I found it... Is there a known procedure to connect a TH-D74 with Bluetooth to APRSIS32? I think my unknown part is any special "port" parameters, but all help

Justin, Out of curiosity, what is your call sign? what is the call sign of the station you’re using, and how do you have it hooked to a radio? These don’t exactly answer your questions but it gives al