No problem!! Greg KB3KBR Sent from my Verizon, Samsung Galaxy smartphone

Try Configure> Metric> Distance. Greg KB3KBR Sent from my Verizon, Samsung Galaxy smartphone

http://aprsisce.wikidot.com/doc:red-dot Greg KB3KBR Sent from my Verizon, Samsung Galaxy smartphone

Thanks Rob, but I've got the USB power settings set to never sleep. It's just a quirk of Windows. I've had the same problem on laptops with the same setup. It just goes wonky, such is life lol. Greg K

Your 400 will allow for recieve and transmit. You just can't use the internal TNC. If you've already setup for FlDigi or other sound card modes you're setup for sound card APRS. I personally use an ft

The tncs inside yaesu radios are locked down and inaccessible for transmitting with a computer. The only way to transmit with a Yaesu is to use either the sound card method such as you would with FlDi

If I'm thinking what you're saying, try Screen> uncheck Dead Reckoning. Greg KB3KBR Sent from my Verizon, Samsung Galaxy smartphone

Theres also a discussion happening on RadioReference about this. France is looking to take away the spectrum for aeronautical use. A lot of people say that it's a bad idea as quite a few amsats downli

I believe sound is the dings etc when you have windows sound turned on and you receive a message or have a port error. Greg KB3KBR Sent from my Verizon, Samsung Galaxy smartphone

Control-T?? I have the 2019/01/21 version and Control-G still brings up the test filter. Control-T just forces a transmit. Greg KB3KBR Sent from my Verizon, Samsung Galaxy smartphone

There is way to change the screen orientation, and lack of mobiles is not surprising. There aren't too many active mobiles in NW PA. If I take my igate down and the objects its putting out there is a

Also, after looking at the website I think you may have downloaded the wrong modem. You want soundmodem100 so you can select AFSK 1200. I've never seen the Manchester 1200 before. Greg KB3KBR Sent fro

What version are you using? Try turning off the Dual PTT option and make sure the waterfall is at 1700. Greg KB3KBR Sent from my Verizon, Samsung Galaxy smartphone

If you're going to use a signallink you have to have a sound modem such as UZ7HO's sound modem, AGWPE packet engine, or Direwolf. I prefer UZ7HO's sound modem myself. When you get the sound modem down

Did you make sure to extract the program file from the zip file? It will not work and save if it's not unzipped. You can unzip straight to the thumb drive for mobile application. Greg KB3KBR Sent from

All of the Yaesu radios that do APRS have their internal TNCs locked down and unaccessible via software except as an output device only. If I remember correctly you should be able to output either GPS

While your in there changing things, can I make a request to have center me removed from the right click menu in multitracks. It's very close to the return to station menu and sometimes when panning a

Hi Greg, Greg here! My ports that work have the following check boxes checked. Aprs is config: enabled checked bulletin checked messages checked Beacon checked Telemetry checked xmit enabled checked.

You would use the Ctl+g command to setup a filter, either a range or box to send all packets in that filter to RF. Or there is the possibility of using a buddy filter to only put out your local weathe

Yep, click on it and it should ask if you want to reset it. Greg KB3KBR Sent from my Verizon, Samsung Galaxy smartphone