Rob, I thought I had to create a port in APRX that was accessible to any Kiss client, that is why I created it with localhost, and I also tried with the IP of APRX host. Now, following your suggestion

Thanks Robert for reviewing my question. I want to configure APRX using the second option. basically I would like aprx to be used like direwolf, presenting two host ports for remote connection (and ye

Good day to all In the past I use to run APRSIS32 24/7 on an old laptop and I interfaced it with several TNC, virtual (Direwolf) and real (TNC2) everything was configured along the years and was runni

receiving weak packet signals always depend also of the signal quality. If the source is not well calibrated, you will run in trouble like with strong signals. Overdriving the Transmitter has been the

Most Bluetooth GPS have the RX line disconnected, then it do not allow receiving commands. You will find in Internet some documentation how to cable back the RX line to allow changing mode 73 IW2EJH

Thanks for the answer Using the methode to repeat only wide1-1 is a starting point, but i would like also to be able to filter some stations, avoiding to repeat them. And I would like to stay with APR

I have a question related to digipeating: Recently a new digipeater have been installed on top of my head, a few kilometer away at higher altitude. obviously this new digi is repeating a lot of statio

I do not see anything unusual here you can run two instance of APRSIS32 if you want to work ISS in parallel with APRS node You can also run multiple ports on the same instance (I randomly do that with

Thank you all for the info you provided. going back to the original question: IZ1JPS-14>ARISS,WIDE2-2:=4525.93N/00836.66E-CQ TEST TRX Best DXs 73 {UIV32N}" IZ1JPS-15>ARISS,WIDE2-2:=4525.93N/00836.66E-

Good day all I have been running packet software for years, and APRS with APRSIS32 too, I'm now doing some test with Satellite traffic. I started with a second instance of APRISCE running and using th

In the past, I use to receive randomly some packets from long distance stations. These stations usually were in the direction of my antenna, and I receive them probably due to a meteo scatter, or simi

Thanks Fred for the replay, and for the suggestions. I was really looking for a portable solution. Using the smartphone with APRSISCE connected to a TNC and then to a radio, is a lot of stuff and lot

Hi all, I read in the past that some experimentation have been made in connecting APRSISCE running on Windows Mobile to a tracker or TNC using the Bluetooth. I have found nothing related to connecting

That would be great to be able to use these old Ipaq or similar devices, as you said David, these usually have the serial connection. Idea is to have a portable APRS station with one of those devices

I got the same error on my Ipaq RZ1715 (Processor is a Samsung S3C2410) with Windows Mobile 2003 SE version is 4.21.1088 (Build 14132) Regards iw2ejh,Marino