Got it, thanks. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

Got it, thanks. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

Many thanks Lynn and Robert, that's a big help. 73, Don W4GCW

Anybody know how to prevent text and log documents appearing on my desktop? Any help would be appreciated. 73, Don W4GCW

I was able to find the setting and turn it off. Working just fine and no *Int* any longer. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

That worked, many thanks. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

I see it in the scroller. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

Got it, thanks Robert. That also prevents me from seeing my callsign in the scroller when the beacon is sent. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3

Greg, thanks for your reply. Is there a setting that I might have changed to make that happen? 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

Hi Robert, thanks for your reply. I see it in the scroller and I've only seen in the last month or so even before I updated to the new version. My beacon is digi'd so it doesn't seem to upset anything

I've noticed that when my radio transmits a beacon, the beacon starts with *Int* . I've looked through all of the docs and am unable to find anything on this subject. Has anybody had this problem or k

Same in the Space Coast (Brevard County) of Florida with gas selling at $1.84 a gallon too. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600 y To

That's it. Thanks Greg. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

Thanks Greg, I ll give it a try. 73, Don

Need help changing display of moving stations from kn/h to mph. Thanks. 73, Don W4GCW

Rob, I wasn't aware they had one but I'll check it out. Thanks for the head's up. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

Rob and Lynn, Thank you guys for your help and assistance. I've changed all cables and replaced the MFJ 1270x tnc with an old KAM and now APRSIS32 is working like a champ. 73, Don W4GCW

Hi Rob, I appreciate your reply. Equipment here is an MFJ-1270X powered via serial cable and a Yaesu FT2600. I'm able to see received packets via the yellow light on the tnc and the signal bar on the

Lynn, It's looking like the problem is with the tnc. I downloaded Pin Point APRS software and had the same results, no tx or rx with either program. I'm going to take the tnc out of kiss and see it it

Good morning Lynn, I've verified that the tnc is in KISS mode. What's next? Thanks. 73, Don