Thank you, Our intent is NOT to "SPAM the air waves" with relentless beacons, arbetrary weather, and "Smart beaconing". We are targeting the areas of Vancouver Island, and the interior of BC where the

Lynn I understand that its bad form and we ARE looking for alternatives for this, such as JS8Call (But it has NOT way for an APRS message to be replied too), CCW Messenger is dead in the water, and no

We have an HF APRS iGate setup on the following : Freq : 10.147.60 Mhz USB Mod : 300 baud Tones : 200 hz spacing centered on 1700kz Were not using PSK, but it is possible and we may be implimenting it

Good afternoon, Our local club has been working on getting our HF iGate setup. So far we have some success, and were very happy with that, but we want to continue to improve and expand the capability.

I used that script, I had to change the pac1: to pac: as my PTC-IIex output is pac:, otherwise I was getting errors. But.. Once the command "pac baud r300" is issued, when the next command "pac" or "k

This is the output from the trace(port(10.147.30)) WinMain:2020-02-14T02:44:41.877 Starting Port(10.1473) Port(10.1473):2020-02-14T02:44:41.877 CpReader Running on COM2:9600,N,8,1 (11 OpenCmds, 3 Clos

I have done the capacitor mod, with no change. SCS has given me instructions to do a memory dump / check in the sys mode to try and clear the flash memory. more to follow.

Here are the instructions I have been following : https://robust-packet.net/Robust-Packet-Network-Manual.pdf Specificaly :

Good afternoon, I am putting together an HF APRS station, or attempting to anyways. I am using a TS-2000 and SCS PTC-IIex as hardware. I am using APRSIS32 to control it all. But I am finding it not so