Good luck in finding the problem and I can confirm it's a pain... Try looking to see if a driver has changed, assuming it's Windows who change drivers when they do an update !!!!? Min Standen G0JMS

Have a look at the Vero radio VR N7500. That will do APRS RF and digital in the app that operates it. Dual band 50w and 40w small radio which can be mounted out of the way and for your needs an Androi

Glad you have sorted it J Min G0JMS

Yes it can say that it working OK and it’s the best thing since sliced bread…… but it still can be a driver issue, it will tell you that it’s the best, but it may not be suitable to what you plugging

Hi Michael Sorry don’t know Win 11. This is what I do for Win 10 to search for the old driver if it’s been changed by windows. 1. Open Device manager 2. Select Port in ports 3. Right Click and select

Personally I find that Windows screws with drivers to ports every time there is an update and have do a search to correct the issue it has caused. I’ve seen ports work of but then not in Windows trace

Rick Is this station causing the issue NC4HC-15 Club Station with the setting of WIDE2-2 Is the message being seen again and getting the errors or repeats showing up on KD4KBO-2. Just a thought. Min G

HI Burt If your fixed station put the location in manually as any gps position location will suffer from GPS jitter and location will move by several yds/meters Turn off GPS and fix the location on th

Hi Mark Put your call sign (without anything else) in here and you will get an APRS code for all of APRS operation…. https://apps.magicbug.co.uk/passcode/index.php/passcode G0JMS Min.

Your showing up on APRS.fi. Min Standen G0JMS

Don What did you change ? It looks like GPS data, incorrect data being received and then put to iGate.. suggest reboot or correct the change that was made. Min G0JMS.

Hi Joe I have the same setup and the interface can be a pain. Make sure you have the correct driver if your using a USB to 9 pin D connector (some use a Prolific Chip and you may need to find a driver

Hi Cory If you an Android phone you can use APRSdroid app or even the Vero VR N7500 app without the radio this now records your route on the phone and can be exported as a KLM file. There are several

On aprsdirect your call is being seen. Min Standen G0JMS

Can I suggest looking at the driver for usb to d plug. Windows will update drivers. It could be a cloned chip in the usb as I have seen the same issue. Going back to the old driver of 2007 resolves th

Thanks Fred… Min G0JMS

Hi Fred Thanks for the link and will try it but I normally use Basecamp for any mapping and routes, motor biking(motorcycling) or car. With the controls that BC has a true time for the setup but doesn

If I'm wrong don't shout. Does Kill not block a receiving a station ? Min G0JMS

Look at the windows driver for the coms port as that is the normal issue. Windows thinks you should have a new driver and then screws up the system. Min Standen G0JMS 07917 830 410

Hi All Not sure if this is going to help. Correct the Kenwood TM D-710A does not have a GPS and putting in the GPS position and pressing “USE” it will transmit in APRS mode on the TNC. Do you need to