Bob, Understood. 73 Randy KA0AZS

James, Roger that. I am aware of the differences between AGL, MSL and HAAT. The heights were given to me by the Trustee. Since one of the numbers does not match where I know the antenna is AGL, I'm as

Bob, RR. The link that Fred posted (to a page I think you wrote) refreshed my memory and explained it perfectly. 73 Randy KA0AZS

Fred, Thanks! That explains it all perfectly. I think I knew that at one time but have not set up a PHG in so long I had forgotten it. 73 Randy KA0AZS

I'm setting up objects for a couple of local Winlink nodes. Winlink inputs them to the IS stream, but I wanted them to be available locally on RF. Transmitting objects is simpler than attempting to se

"The transmit path specification also applies to all RF ports, so you cannot have different paths for the different bands." That's why I went with a separate instance. My VHF Wide2-2 path is not appro

OK, I set up a second instance of APRSIS32 in it's own folder and put a second copy of the UZ7HO SoundModem in the same folder. Running as KA0AZS-1 I currently have it set to AFSK AX.25 300Bd. It is a

Thanks Lynn I am already using UZ7HO's SoundModem for VHF Winlink. Once I get a chance to play around with that set up I'll ping this discussion again. 73 Randy KA0AZS

Jerry, Thanks. I actually do have Stephen's page bookmarked and am familiar with it. It's why I didn't ask about frequencies or radio set up. As I said in the OP, I don't really have a need other than

I've looked in the wiki, and while there was some discussion of APRS HF frequencies, is there anything out there detailing how to set APRSIS32 to work with a Signalink USB to run HF APRS? No special n

Working well for me, I'd say yes.

I had that issue recently with my home station. The issue turned out to be a loose power connector on the radio. Apparently it wasn't getting enough voltage to keep the radio running when it tried to

The only issue I see with that cable is that it has a straight data connector rather the 90 degree connector of the Kenwood stock cable (which of course these days usually requires a serial-USB conver

I've been walking a couple of hams through this recently and finally found time to write up what I have found to work. When I get a chance I'll add screen shots and post to the files section. Hope thi

I've learned from hard experience that you need to connect the data cable to the Control Head, NOT the radio body when using APRS (specifically APRSIS32). The TNC resides in the control head. Respectf

Requesting a Passcode for K8MCA. This is the call for Montgomery County (Ohio) ARES. (http://www.mocoares.org/) I've infoed the EC on this. Please contact me with any questions. 73 Randy KAØAZS

I actually use the Special status for trackers and other stations during public service events. It's easy to filter to show only stations with that status at net control to focus on them if there is o

Check to see if that station is transmitting an Emergency Beacon. That would cause a window to open up centered on that station. It's meant as a means of alerting stations that someone is having an em

Could this be used to gate NWS weather warnings (Tornado, Severe thunderstorms) from the IS to local RF? I.e. gate any object marked ILNTOR for instance to RF, preferably with just one hop. There used

Could this be used to gate NWS weather warnings (Tornado, Severe thunderstorms) from the IS to local RF? I.e. gate any object marked ILNTOR for instance to RF, preferably with just one hop. There used