Howdy gang, In APRSIS32 is there a way to select a callsing with suffix (K7MT-63 for example) from internet to my VHF Igate K7MT ??? I have K7MT-8, K7MT-63, and K7MT-11 HF on 10 meters and would like

Hi Lynn and to the gang, I fixed the Loop in UISS SGATE addon and unchecked the AutoREPLY. That was my fault on K7MT-6 my SGATE for Satellite APRS digi here in Montana. I checked APRS dot FI and no lo

Hi Lynn, Make that \Q for Quake the /Q is TBD I think that means To Be Determined. I will watch and see if the Earth Quake symbol pops up when a quake occurs in my circle of interest around Helena, Mt

Thanks Lynn, I put a /Q earthquake symbol in the Cntrl G window. What must I do if I want two or three special displays ?? Is there a comma in between or space ??? Displaying Earthquake data from USGS

Howdy gang, When I used the APRS + SA by Brent Hildbrand, there was an option to pick symbols off the internet feed like a Earthqake symbol so I could beacon out 1 or two hops if it occurred in my are

GM Gang, I got an excellent deal on an Alinco DR-135TP to replace my Alinco DR-1200T/KPC-3 as my K7MT Igate. I needed my Alinco DR-1200T/KPC-3 as a spare in case one of the six mountain top nodes I ta

Howdy gang, We have been having issues with two Timewave PSK-232's using the USB A to Mini B cable. One on packet 145.010 and one on APRS 144.390 using APRS + SA (KM7DES). They just loose communicatio

GM from Montana - So far really no issues with the transmit interfering with each other. My beacon is set to transmit once and hour for each program hf 00, RB at 20, APRS messenger 40. Each is 20 minu

Howdy gang, I finally got my SCS PTCIIex operational on Robust Packet with APRSIS32 (K7MT-8) I have my ICOM706MKIIG set on 10147.300 for RP on the 13 pin port. I have another APRIS32 program running H

Hi gang - I did a short experiment today when I borrowed a SCS PTC II ex. I had the SCS on the 13 pin input of my 706MKIIG for Robust Packet then HF 300 baud/digital on my Signalink to the 6 pin din o

Howdy gang, KM7DES-6 robust packet 600 baud APRS on 10147.300 mhz was activated today at Ft. Harrison, Mt. using ARPSIS32. I got the proper KISS setting from the robustpacket.net web page in the manua

Howdy from Bill K7MT. I just went ahead and got the RTC (Real Time Clock) for $12.00, set the time, and the internal battery keeps it tickin. Even after being powered off for a couple three days the t

Howdy gang, If anyone would like a simple way to get out of kiss mode or out of host mode for most tnc go to www.winlink.org, click on Client Software, click on RMS Express on the right, then page dow

Thanks everyone, I took out the path as I am just an HF Igate with no gating using a USB Signalink for HF packet. When I first approached this HF idea, it was suggested I run separate copies of APRSIS

Howdy gang, I am testing an HF Igate here in Montana and see several different paths. I copied one echo,gate,wide2-1 and that is the one I have had on the air for a couple three days. I looked and loo

Howdy gang, My aprsisce station has been running for some time here in Montana on VHF. Siting next to my APRS station is my Icom 706MKIIG that I use for voice on the Montana Traffic Net, DRN7 Traffic

Howdy gang, I just caught up after a bit of skiing !!! Ye Ha think snow... One thing I would like to see in the article is the APRS LINK to the winlink system brought up. I use it check my winlink mes

GM and Merry Christmas to all in APRSIS land. I got up pretty early here in Montana to watch the Astro's doing their space walk on the ISS to change out the cooling unit. Woo Hoo !! What a view when t

Hi Waren, I see your using a Kenwood D700 for your home station. If you need a KPC-3 TNC for your home station so you can use your DM700 mobile for APRS and Local repeaters, let me know as I have extr

---In aprsisce@..., <kj4erj@...> wrote: Looks to me like WLNK-1 is having some issues, unless it routinely issues rej commands. Consider the following raw packets from: Hi Lynn, Bill K7MT