I'm to assume, you are running it under wine or crossover? In your terminal, you can see if your USB device is recognized. Type: ls -al /dev | grep ttyUSB and you should see a listing for something li

Did you set up as KISS or SIMPLY KISS?

My apologies on the passcode and James is correct. It would only be necessary for gating traffic.

One, have you requested a passcode and two, if you received it, did you input it into the settings? http://aprsisce.wikidot.com/doc:passcode 73 John

Thanks for the information, Rob. I'm actually on the air. The thing I'm trying to tighten up is the timing between the heard packet and the transmitted packet. It is taking about 3~4 seconds before my

I found how the settings should be for the KPC3 and I found how to set the TT4 in KISS Mode in the Documentation. Is there a source of generic or TNC specific commands for use in the XML configuration

Because Simply (KISS) was meant to allow the TNC to be "left alone" in the KISS mode, I'll try testing with the TNC itself before attempting to make any changes to the XML File. Thanks for the input.

I've looked in the history and if I've overlooked it, my apologies. I'm using a TT4 in KISS mode and am setting up a port in Simply (KISS). Where are the parameters for this? Is it the program that de

HooYah! Tested here at the house with the change in reg file as listed above and also tried the other option that was recommended also in the same link mentioned before. It was: [HARDWARE\\DEV

I pulled up the /usr/group file and I am already listed as a user under "dialout." Further testing this evening when I get the GPS unit in my hand. 73 John

I confirmed this at http://wiki.jswindle.com/index.php/Wine_Registry. The numbers at the end of the bracket are indeed a key timestamp, specific to each entry and is automatically generated when the f

I won't be able to confirm my actions until I get home later, where my GPS is with the cable but this is what I've done so far. I accessed the link you provided and tinkered with the entries on the re

Steve, were you able to get it to run under WINE? I was able to run it fine in Virtual Box but have not been successful in running under WINE. Better explained, I can run and perform if I connect to j