IIRC the original intent (as impliemented in DOS APRS) was that the map screen would center on, and zoom in to, the location of the Emergency beacon, as well as giving an audio alarm. I would also add

Finally got around to working with APRS IS32 (and getting it working). Learned way more than I wanted to about how to do a hard reset on an MFJ 1270 to get it out of KISS mode. Finally got the softwar

Yes. Now if you ever get a chance to add wind vector lines, it'll be just like the WX display I liked from the DOS version! (NOT a complaint, just a request) Yes, thanks I'll look it up from my APRS+S

OK, broadcasting my ignorance/lack of reading comprehension skills here.... Is the line: <DigiXform>WIDE1-1=WIDE1*</DigiXform> the functional equivalent of setting "MYALIAS" in APRS DOS, +SA or other

Different strokes.... I prefer North Up for fixed operating locations (home, Public Service event Net Control Points. But I MUCH prefer Track Up when operating mobile/portable. Usually running in my v

Thanks for the quick reply Lynn. And thanks again for your work on this program 73 and Merry Christmas Randy KAØAZS

I've gone through the WIKI and searched the archives here (but may have missed something), so forgive me if this has been covered before. Now that the home station (XP,MFJ-1270 and IC-2000) is working

Well, I am obviously missing something basic here. KISS Port configured for COM1 9600 Baud. TNC in PKT mode on radio. I know the port and speed setting are correct because I can access the TNC with Hy

WinMain:2010-12-25T19:20:38.309 Logging Enabled WinMain:2010-12-25T19:21:01.883 PortStop:rpInfo(KISS)(0) Not Found WinMain:2010-12-25T19:21:07.531 PortStop:rpInfo(KISS)(0) Not Found WinMain:2010-12-25

Lynn, Yahoo truncates your e-mail address and doesn't give me an attachment option, so I'm trying the address on the wiki page. Attached is my XML file I've been using to try to connect to the D-7. It

Oh, I forgot to mention when I sent the XML file. I have open and closed the software several times during this process (and power cycled the radio and changed TNC modes several times)

Here it is Lynn Thanks again Randy Randy Allen, KA0AZS

Lynn, That did it! http://www.findu.com/cgi-bin/find.cgi?KA0AZS-3 http://www.findu.com/cgi-bin/msg.cgi?call=KA0AZS-3 I knew it had to be something stupid on my part. I really appreciate your time and

Making progress. Got the D700 at the County EMA to connect first time and we are now running APRSIS32 there (KM8EMA). Practice with the D7 did help! Next: My portable TNC for public service events is

Lynn, To save you digging out the loaner D7 (if you haven't already) here are my observations <SNIP> It did not that I could observe. The only indication is when I had the software configured properly

The KPC-3+ connected and started working first time I tried. Thanks to the set up notes in the Wiki (And thanks to Eric VA2EC!) Next, and hopefully last, challenge, operating mobile using the D700 in

Had some time today and got APRSIS32 working with the D700 (in PKT mode)in the vehicle, including tracking around the neighborhood. As I suspected, I needed to run a separate GPS (I had a spare USB ho

A couple of reasons for ambiguity: 1. You don't have a GPS and are manually entering your coordinates. Ambiguity allows you to accurately show the limitations of the source of your position. Example,

One reason is to show that there is a digi in that area. Helps with event planning (do I need to dig up a portable digi and all the work set up for a temporary set up entails?)when you know there is c

I would find it useful at public service events where I'm setting up a portable station with no GPS and limited time frame to fool around with it. Of course, the APRSIS32 version of using the map and