This showed up in Log, so am guessing it's digipeating? WinMain:2012-01-30T20:56:01.097 Logging Enabled WinMain:2012-01-30T20:56:30.909 All Hops Used (4/4) in (KW4B>APOT21,KW4B-1*,WIDE1*:!3200.71N/080

James- opened that file in Notepad, found two instances of the DigiForm line, and added under one of those as so it looked like this: <!--DigiXform--> <DigiXform>WIDE1-1=WIDE1*</DigiXform> Hit save an

James- OK, within APRSIS CE, I see two files: 1) APRSIS32.xml and APRSIS32-safe.xml. I am assuming the first file is what I want to edit ? I tried opening it and it opens in Windows Excell with the fi

Thanks to James and Lynn for quick responses. My bad-- should have said HTML editing, so I will give both of your hints a try and report back. thank You again for help 73 Paul

OK, I tried APRSIS32 once before but couldn't figure much of it out, went back to AGWTracker; but have become frustrated with its limited features so decided to give APRSIS32 another try; but am not o

Lynn - thank you very much

Again still learning the Program. On my TH-D72A, if an APRS station is transmitting Wx information, I can see it in detail by cycling thru the screens for that station. ON AWGTracker I can click on a

Touche :)))

Thank you, I think you helped on both problems. - I did the Drag and Zoom and then Transmit and ME is now in the correct location - On all the Msgs at Start up, under Enables/Logging/ I had "All at St

Getting more familiar with Program and the Wiki, so thanks for your help. Two more questions: 1) In my setup, I got my location in the wrong place, need to change Lat/Long or drag symbol to correct lo

Lynn- OK - I have the port configured as you described (2x) and believe it is working. Please- where do I look in the Wiki for: Explanation of left column where call signs stack up and why are there m

Lynn- appreciate you taking time for quick reply. 1) I do have a Comm 3 port that is being used by T2 and AGW PE. I was told by a member of the T2 Yahoo Group that I could run more than one APRS clien

OK - first problem. I did watch Julian's video on port config, but still think I screwed it up. Under Configuration/Ports/New Port; I now have three ports and I don't think any are correct. --How do I

OK I admit I am somewhat new to the APRS world. But I have a TH-D72A HT and have a T2 OpenTracker coupled with my FT-7800 as an APRS base station radio. I started with AGWTracker and the AGW PE. Right