OK I admit I am somewhat new to the APRS world. But I have a TH-D72A HT and have a T2 OpenTracker coupled with my FT-7800 as an APRS base station radio. I started with AGWTracker and the AGW PE. Right

OK - first problem. I did watch Julian's video on port config, but still think I screwed it up. Under Configuration/Ports/New Port; I now have three ports and I don't think any are correct. --How do I

Lynn- appreciate you taking time for quick reply. 1) I do have a Comm 3 port that is being used by T2 and AGW PE. I was told by a member of the T2 Yahoo Group that I could run more than one APRS clien

Lynn- OK - I have the port configured as you described (2x) and believe it is working. Please- where do I look in the Wiki for: Explanation of left column where call signs stack up and why are there m

Getting more familiar with Program and the Wiki, so thanks for your help. Two more questions: 1) In my setup, I got my location in the wrong place, need to change Lat/Long or drag symbol to correct lo

Thank you, I think you helped on both problems. - I did the Drag and Zoom and then Transmit and ME is now in the correct location - On all the Msgs at Start up, under Enables/Logging/ I had "All at St

Touche :)))

Again still learning the Program. On my TH-D72A, if an APRS station is transmitting Wx information, I can see it in detail by cycling thru the screens for that station. ON AWGTracker I can click on a

Lynn - thank you very much

OK, I tried APRSIS32 once before but couldn't figure much of it out, went back to AGWTracker; but have become frustrated with its limited features so decided to give APRSIS32 another try; but am not o

Thanks to James and Lynn for quick responses. My bad-- should have said HTML editing, so I will give both of your hints a try and report back. thank You again for help 73 Paul

James- OK, within APRSIS CE, I see two files: 1) APRSIS32.xml and APRSIS32-safe.xml. I am assuming the first file is what I want to edit ? I tried opening it and it opens in Windows Excell with the fi

James- opened that file in Notepad, found two instances of the DigiForm line, and added under one of those as so it looked like this: <!--DigiXform--> <DigiXform>WIDE1-1=WIDE1*</DigiXform> Hit save an

This showed up in Log, so am guessing it's digipeating? WinMain:2012-01-30T20:56:01.097 Logging Enabled WinMain:2012-01-30T20:56:30.909 All Hops Used (4/4) in (KW4B>APOT21,KW4B-1*,WIDE1*:!3200.71N/080

I am now getting digi trace log : WinMain:2012-01-30T21:04:57.662 Digipeating KW4B-1 (WIDE1-1) via(WIDE1-1=WIDE1*) WinMain:2012-01-30T21:04:57.663 Original(KW4B-1>APOT21,WIDE1-1,WIDE2-1:!3147.00N/0812

How about gettingthe basics down before trying to become part of the infrastructure? -- James- that's a bit harsh. I believe I have the basics of APRS, but certainly not the basics of APRSIS32, that's

--- I have been out of town a bit, so just getting back to solving my issues with my station and APRSIS32. I have tried to digest all the suggestions and corrective actions put forward by the group, a

Replies embedded in bold

James- --- xml file sent to Lynn --I verified with Lynn I have the correct pass-code, and verified it is entered correctly -- I disconnected, and reconnected APRS-IS under Enables, still no change in

Lynn found that I had a period or dot at end of pass code, that was the issue. Now showing up in aprs.fi in correct location. 73 Paul