ANSRVR seems down, I also note my activity pages have not been updated since the 12th, I know at least some of that involves Lynn’s company database server. So that could be important for Lynn to know

Hi Lynn I was not concerned about the activity pages, only the fact they were not being updated might have been caused by something more important to you. Like the database server being down. Steve G6

Hi Burt The program does not have an installer. So download it and save to a folder on your C: drive. Preferably not under the programs folder as if you do you will have to mess with windows security.

That’s good Julian I will bookmark that in case anyone else asks. Most people expect a program to come with an installation program these days. And I guess at some point Lynn might do that. And maybe

Hi All Well I watched the shuttle launch, I had put out a message that it was happening, And Dave 2E0JXE joined me watching. I knew Lynn was of to the beach to watch. The great thing is I ended up wit

I am lucky enough to be far enough away from others that I usually don’t cause ISS issues for others. I like to Igate as a service to others but do end up igating my own station when it digi through I

They are path settings, not sure of the difference between NOGATE and RFONLY but the mean not to gate the packet to the internet. ARISS is a generic path to send via satellite and RS0ISS-4 is the digi

I am using a TNC-X on both XP and 7 x64 and have had no problems, have not needed to make any TNC-X specific changes to the XML. I swapped from a TNC2KISS on one machine and only need to change the co

Lynn In it’s basic form a TNC-X is a KISS only TNC and uses TAPR TNC2 commands, it can however have modules installed to turn it into a digi. Or tracker. So no commands are required at startup for the

As far as I can tell with the X-Tracker module you need to send CTRL-C to get into config mode, it’s the X-Digi that needs a 20 second quiet period at TNC power up. I don’t have either module so can’t

The TNC-X does not have a config mode it’s the add on modules that do. With out modules it’s a KISS only TNC. With the X-Digi Q will drop it out of config mode. But that would also put it in config mo

We cross posted, but yes I think that would work, it’s a better soloution than mine. That would work with any TNC-X combination I think. There is a usmartdigi module but I don’t see why anyone would u

If you want a generic TNC-X setup waiting for a prompt would be bad. A TNC-X without modules will not supply a prompt as such. Sending the below will cover three options. TNC-X and a TNC-X with a X-Di

You right, good job I am not a programmer. The following is the response. But I am using a TNC-X without a module and I don’t need any of this as my original post of my setup works fine. But if we are

Send a private message to Lynn KJ4ERJ with your callsign and Lynn will reply with a password Steve G6UIM From: aprsisce@... [mailto:aprsisce@...] On Behalf Of wa5qbx Sent: 01 M

Hi Lynn Try garywin98@... that’s what he used to post to the list Steve G6UIM From: aprsisce@... [mailto:aprsisce@...] On Behalf Of Lynn W Deffenbaugh (Mr) Sent: 02 March

Hi All First a photo of an astronaut taken from earth on a spacewalk http://img546.imageshack.us/img546/4724/201103021949set.jpg Taken by Ralf Vandenberg 3 amateur sats go up tomorrow Time: 2:09:43 a.

Whilst I don’t want commercial operators to be using APRS either, I can see a point to having sat nav linked in. If you are chasing a balloon it would be handy to feed the APRS position of the balloon

If you want to sell bridges to Americans talk to me, we brits have form on that. Got a nice one just down the road. http://en.wikipedia.org/wiki/London_Bridge_%28Lake_Havasu_City%29 Urban legend says

The licence conditions are a mess in the UK. For example you cannot transmit from the air, but it’s ok to use the 70cm ISM band, use my callsign illegal/ not use my callsign legal ok with power condit