Date   

Cancel Future Tracking

Carmine Prestia
 

I'm using APRSIS32 on a major public service project right now and it insists on showing me a predicted track for my units.  I don' need this and want to turn it off but cannot find out how to turn off the future track.


Can anyone assist?


Thank you.

Carmine Prestia, K3CWP


Satellites

Bob KD7YZ <kd7yz@...>
 

Hello all

reading the doc's, page 136:
----------------------------------
Satellite Operation
Control-O (Oscar) opens the world of Satellites. This is only accessible
if you use
the developement version of APRSIS32.
----------------------------------------

u can see by way of the attached jpeg that I am not in a devel version.

is it possible, or wise, that I change?

If so, how to?


--
73
Bob KD7YZ
AMSAT LM #901


My iGate Log. Is it correct?

Bob KD7YZ <kd7yz@...>
 

That is, I was trying to get my setup to take useful Signals off 144.390
or 145.825 and put them into the Internet-Side.

I am too new to this to make judgements on the Scroll-Pane.
--------------------------------------------------------------------
WinMain:2019-07-20T23:48:31.882 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:;146.94-TR*111111z3823.97N/08239.77Wr146.940MHz
T107 R25m KG4DVE/R
WinMain:2019-07-20T23:48:33.782 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:;146.94-TR*111111z3823.97N/08239.77Wr146.940MHz
T107 R25m KG4DVE/R
WinMain:2019-07-20T23:48:33.892 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:;146.94-TR*111111z3823.97N/08239.77Wr146.940MHz
T107 R25m KG4DVE/R
WinMain:2019-07-20T23:48:41.728 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:@202347z3824.25N/08237.70W#WX3in1Plus2.0
U=11.9V
WinMain:2019-07-20T23:48:43.731 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:@202347z3824.25N/08237.70W#WX3in1Plus2.0
U=11.9V
WinMain:2019-07-20T23:48:43.829 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:@202347z3824.25N/08237.70W#WX3in1Plus2.0
U=11.9V
WinMain:2019-07-20T23:53:31.816 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:;146.94-TR*111111z3823.97N/08239.77Wr146.940MHz
T107 R25m KG4DVE/R
WinMain:2019-07-20T23:53:33.792 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:;146.94-TR*111111z3823.97N/08239.77Wr146.940MHz
T107 R25m KG4DVE/R
WinMain:2019-07-20T23:53:33.894 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:;146.94-TR*111111z3823.97N/08239.77Wr146.940MHz
T107 R25m KG4DVE/R
WinMain:2019-07-20T23:53:41.731 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:@202352z3824.25N/08237.70W#WX3in1Plus2.0
U=11.9V
WinMain:2019-07-20T23:53:43.731 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:@202352z3824.25N/08237.70W#WX3in1Plus2.0
U=11.9V
WinMain:2019-07-20T23:53:43.833 RFtoIS:[AGW/UISS?]IGated
KG4DVE-1>APMI06,WIDE2-2,qAR,KD7YZ-1:@202352z3824.25N/08237.70W#WX3in1Plus2.0
U=11.9V
----------------------------------------------------------------------

So, does it look like I am heading in the right direction ?
It isn't easy to keep them all running. For unknown reasons, the other
players will stop running (freeze) occasionally. Or kill themselves.

APRSIS32 keeps ticking though.

I had been seeing maybe ten other semi-local FM stations. But this
evening it's only Bertha, the KG4DVE repeater ...quit a good signal
here, even on the Loops.


Would there be a more efficient set of programs to run into APRSIS32
than I am using now?


--
73
Bob KD7YZ
AMSAT LM #901


Re: How to get Scroller back along the left-side ?

Rob Giuliano
 

I would add ...
Putting thed infomration on the list does a few other key things:
1.  Allows others to provide their experiences and participate or at least
     move the issue higher on the search list.
2.  (Possible) brings more recent information/updates to on the topic
3.  Spurs thoughts on related topics and possibey 'related' adds information

Robert Giuliano
KB8RCO



On Friday, July 19, 2019, 7:45:07 PM EDT, 'Lynn W Deffenbaugh (Mr)' kj4erj@... [aprsisce] wrote:


 

On list is fine with me.  One of my standard sayings is that for every
question that is asked, there's likely more than the asker interested in
the answer.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/19/2019 7:00 PM, Bob KD7YZ kd7yz@... [aprsisce] wrote:
> On 7/19/2019 18:02, Mark Petiford rv6amark@... [aprsisce] wrote:
>> CONFIGURATION>SCREEN>ORIENTATION> then click on WIDE, NARROW
> Yay Mark, the Elmer again. Perfect. Back to "normal"
>
> Were u able to tell if I moved any RF to Internet Side after I made the
> other changes?
>
> Or, is this better off-list so as not to clutter with beginner trivia ?
>
>
> --
> 73
> Bob KD7YZ
> AMSAT LM #901
>
>
>
> ------------------------------------
> Posted by: Bob KD7YZ
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
>


Re: How to get Scroller back along the left-side ?

Lynn Deffenbaugh
 

On list is fine with me.  One of my standard sayings is that for every question that is asked, there's likely more than the asker interested in the answer.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/19/2019 7:00 PM, Bob KD7YZ kd7yz@denstarfarm.us [aprsisce] wrote:
On 7/19/2019 18:02, Mark Petiford rv6amark@yahoo.com [aprsisce] wrote:
CONFIGURATION>SCREEN>ORIENTATION> then click on WIDE, NARROW
Yay Mark, the Elmer again. Perfect. Back to "normal"

Were u able to tell if I moved any RF to Internet Side after I made the
other changes?

Or, is this better off-list so as not to clutter with beginner trivia ?


--
73
Bob KD7YZ
AMSAT LM #901



------------------------------------
Posted by: Bob KD7YZ <kd7yz@denstarfarm.us>
------------------------------------


------------------------------------

Yahoo Groups Links




Re: How to get Scroller back along the left-side ?

Bob KD7YZ <kd7yz@...>
 

On 7/19/2019 18:02, Mark Petiford rv6amark@yahoo.com [aprsisce] wrote:
CONFIGURATION>SCREEN>ORIENTATION> then click on WIDE, NARROW
Yay Mark, the Elmer again. Perfect. Back to "normal"

Were u able to tell if I moved any RF to Internet Side after I made the other changes?

Or, is this better off-list so as not to clutter with beginner trivia ?


--
73
Bob KD7YZ
AMSAT LM #901


Re: How to get Scroller back along the left-side ?

Mark, KE6BB
 

CONFIGURATION>SCREEN>ORIENTATION> then click on WIDE, NARROW or AUTOMATIC.  In WIDE, the scroller will be about 5 lines long along the left side as you are seeing.  In NARROW, the scroller will be a long narrow bar the entire length of the window.  In AUTOMATIC, it will "AUTOMATICALLY" switch between WIDE and NARROW based on the proportions of the window that it is in.  Grab the lower right corner of the screen and move it around and you will see the modes change from one to the other based on the dimensions of the window.

While I was working for a living, I learned that I loved troubleshooting complex systems.  I worked with mechanical systems, electrical systems, and various computers on several very complex aircraft.  Keep the questions coming.  I love 'em even if I don't know the answers to all of them.  I am looking a lot of things up that I haven't touched for several years.

Mark
KE6BB

On Friday, July 19, 2019, 2:37:08 PM PDT, Bob KD7YZ kd7yz@... [aprsisce] wrote:


 

Whatever I 'configured', made the Scrolling list of stations and such,
move from all along the Left-Side to a tiny are of the Upper-Left ...
namely, there are 5 lines only.

--
73
Bob KD7YZ
AMSAT LM #901


How to get Scroller back along the left-side ?

Bob KD7YZ <kd7yz@...>
 

Whatever I 'configured', made the Scrolling list of stations and such, move from all along the Left-Side to a tiny are of the Upper-Left ... namely, there are 5 lines only.


--
73
Bob KD7YZ
AMSAT LM #901


Re: APRSIS32 with KW TH-D72 - gps lock

Fred Hillhouse
 

Ah, nevermind.

 

From: aprsisce@... [mailto:aprsisce@...]
Sent: Thursday, July 18, 2019 9:32 PM
To: aprsisce@...
Subject: RE: [aprsisce] APRSIS32 with KW TH-D72 - gps lock

 

 

The D72 has a map? Tell me more. I have never found it.

 

 

From: aprsisce@... [mailto:aprsisce@...]
Sent: Thursday, July 18, 2019 8:43 PM
To: aprsisce@...
Subject: Re: [aprsisce] APRSIS32 with KW TH-D72 - gps lock

 

 

I have a D72. I don’t use the GPS settings. I drag the map to where I am.

 

Have you set the tnc for packet12 plus the D side of the band To TX

 

Later 

 

Don va7dgp 

On Thu, Jul 18, 2019 at 17:37 mspmail2@... [aprsisce] <aprsisce@...> wrote:

 

Hello group

I am trying to get my D72 working with aprsis32 and have it working okay, the only problem is I am indoors and having trouble getting a GPS lock on the D72, so I can't beacon out. Does anyone know how to set a fix location for my location instead of forcing the gps lock?  On the D74 you can set a manual gps location but for the life of me I can't see how this is done on the 72 and have gone through the manual. Thanks, Mike AB7RU

--

Don Poaps

New Westminster, BC

VA7DGP DATA

VA7QU   VOICE

 

 

Winlink: va7qu@...

Subject://wl2k           

 

 

 

                    

  

 

 

 

 

 

 

Virus-free. www.avast.com


Re: APRSIS32 with KW TH-D72 - gps lock

Fred Hillhouse
 

The D72 has a map? Tell me more. I have never found it.

 

 

From: aprsisce@... [mailto:aprsisce@...]
Sent: Thursday, July 18, 2019 8:43 PM
To: aprsisce@...
Subject: Re: [aprsisce] APRSIS32 with KW TH-D72 - gps lock

 

 

I have a D72. I don’t use the GPS settings. I drag the map to where I am.

 

Have you set the tnc for packet12 plus the D side of the band To TX

 

Later 

 

Don va7dgp 

On Thu, Jul 18, 2019 at 17:37 mspmail2@... [aprsisce] <aprsisce@...> wrote:

 

Hello group

I am trying to get my D72 working with aprsis32 and have it working okay, the only problem is I am indoors and having trouble getting a GPS lock on the D72, so I can't beacon out. Does anyone know how to set a fix location for my location instead of forcing the gps lock?  On the D74 you can set a manual gps location but for the life of me I can't see how this is done on the 72 and have gone through the manual. Thanks, Mike AB7RU

--

Don Poaps

New Westminster, BC

VA7DGP DATA

VA7QU   VOICE

 

 

Winlink: va7qu@...

Subject://wl2k           

 

 

 

                    

  

 

 

 

 

 


Virus-free. www.avast.com


Re: APRSIS32 with KW TH-D72 - gps lock

Mike AB7RU
 

Thanks Don. I have it figured out now Set My Position and then turn off the GPS. 
I am new to aprs in general so still trying to get up to speed with aprsis32 with the D72. Tnx 73. mike


Re: APRSIS32 with KW TH-D72 - gps lock

Mike AB7RU
 

Yes that would be it, thanks.


Re: APRSIS32 with KW TH-D72 - gps lock

J Lineback <jelineback@...>
 

APRS, My Position ?


Re: APRSIS32 with KW TH-D72 - gps lock

J Lineback <jelineback@...>
 

APRS, My Position?

On Jul 18, 2019, at 8:37 PM, mspmail2@... [aprsisce] <aprsisce@...> wrote:


Hello group

I am trying to get my D72 working with aprsis32 and have it working okay, the only problem is I am indoors and having trouble getting a GPS lock on the D72, so I can't beacon out. Does anyone know how to set a fix location for my location instead of forcing the gps lock?  On the D74 you can set a manual gps location but for the life of me I can't see how this is done on the 72 and have gone through the manual. Thanks, Mike AB7RU




Re: APRSIS32 with KW TH-D72 - gps lock

Don Poaps
 

I have a D72. I don’t use the GPS settings. I drag the map to where I am.

Have you set the tnc for packet12 plus the D side of the band To TX

Later 

Don va7dgp 

On Thu, Jul 18, 2019 at 17:37 mspmail2@... [aprsisce] <aprsisce@...> wrote:
 

Hello group

I am trying to get my D72 working with aprsis32 and have it working okay, the only problem is I am indoors and having trouble getting a GPS lock on the D72, so I can't beacon out. Does anyone know how to set a fix location for my location instead of forcing the gps lock?  On the D74 you can set a manual gps location but for the life of me I can't see how this is done on the 72 and have gone through the manual. Thanks, Mike AB7RU

--
Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU   VOICE


Winlink: va7qu@...
Subject://wl2k           



                    
  




 


APRSIS32 with KW TH-D72 - gps lock

Mike AB7RU
 

Hello group

I am trying to get my D72 working with aprsis32 and have it working okay, the only problem is I am indoors and having trouble getting a GPS lock on the D72, so I can't beacon out. Does anyone know how to set a fix location for my location instead of forcing the gps lock?  On the D74 you can set a manual gps location but for the life of me I can't see how this is done on the 72 and have gone through the manual. Thanks, Mike AB7RU


Re: What is "Proj: Battery State Tracking" ?

Lynn Deffenbaugh
 

Turn off Enables / Telemetry.  And you'll quit feeding:

https://aprs.fi/telemetry/KD7YZ

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/17/2019 5:48 PM, kd7yz@... [aprsisce] wrote:
And the Interval is 15 Min (V2).

I think I have searched all Setup items; Beacon is OFF .. yet I keep injecting this into the system.

Using APRSIS32 n Windows 10 Pro.



What is "Proj: Battery State Tracking" ?

kd7yz@...
 

And the Interval is 15 Min (V2).

I think I have searched all Setup items; Beacon is OFF .. yet I keep injecting this into the system.

Using APRSIS32 n Windows 10 Pro.



Re: New to Group. How do I D/L the program? [1 Attachment]

Lynn Deffenbaugh
 

Make sure View / All is checked.  I suspect you have the view filtered.

Also, you might want to right click on the Frequency Monitor window and disable it, unless you really want it showing up.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 7/11/2019 3:31 PM, Bob KD7YZ kd7yz@denstarfarm.us [aprsisce] wrote:
On 7/10/2019 13:36, Tom thomask112@comcast.net [aprsisce] wrote:
http://aprsisce.wikidot.com/
I DID watch the linked vid's in case anyone asks.

I sewe some traffic coming thru on a couple 'Ports' . I see some from a
couple Sats .. Am using AGWPE and UISS

What I never see, and my question today, why doesn't the large radius
circle, over-map, contain any of the guys decoded?

screenshot shows what I mean.

if it is allowed, here.
--
73
Bob KD7YZ
AMSAT LM #901



------------------------------------
Posted by: Bob KD7YZ <kd7yz@denstarfarm.us>
------------------------------------


------------------------------------

Yahoo Groups Links




Re: New to Group. How do I D/L the program?

Bob KD7YZ <kd7yz@...>
 

On 7/10/2019 13:36, Tom thomask112@comcast.net [aprsisce] wrote:
http://aprsisce.wikidot.com/
I DID watch the linked vid's in case anyone asks.

I sewe some traffic coming thru on a couple 'Ports' . I see some from a couple Sats .. Am using AGWPE and UISS

What I never see, and my question today, why doesn't the large radius circle, over-map, contain any of the guys decoded?

screenshot shows what I mean.

if it is allowed, here.
--
73
Bob KD7YZ
AMSAT LM #901

1801 - 1820 of 35339