Date   

Re: GPS Setup

Lynn Deffenbaugh
 

APRSISCE/32 expects NMEA strings from the GPS.  You can confirm this by opening a simple terminal program to the GPS port (assuming no other program has it open) and see if it is readable.  Each line should start with a $GPxxx and be a string of comma-separated values not all of which are numeric.

If you don't see this, and it is readable, post the results here.  If what you see is not readable, then your GPS is in a binary mode that will need an NMEA conversion somewhere before getting to APRSISCE/32.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/20/2019 1:13 AM, Brandon Clark wrote:
Hello group,

Well, I've been trying to get my new GPS dongle working with APRSIS32 and am still stuck. I initially did not have the "Enables | NMEA" part going, but once I enabled that the screen displayed the expected elements: location and heading boxes, list of anticipated satellites, etc.

Where I'm stuck now is that the GPS data doesn't seem to be "getting into" the program. When i use the USB dongle with the included testing and config program (U-Center 8.26) I can get a position fix, see which satellites are being received, and so forth. So I know Windows 10 is able to work with the dongle.

Also installed is a virtual com port driver, which creates a COM6 for the GPS dongle. I double- and triple-checked the port configuration in APRSIS32 against what shows up in Windows Device Manager (COM#, Baud, Parity, Data Bits, and Stop Bits). Everything matches.

Now, the receiver is very configurable. My hypothesis is that the receiver is sending data in a protocol that the U-Center 8.26 program can decipher, but which APRSIS32 cannot. I think I have also found where I can flash the configuration to the receiver to change how it communicates.

My question is, what must APRSIS32 receive in order to read the data properly? It looks like there are multiple versions if the NMEA protocol. Which one should I tell the receiver to use? Are there any other settings I should look for in the configuration program?
73,
Brandon Clark, KL7BSC


Re: GPS Setup

Brandon Clark
 

Hello group,

Well, I've been trying to get my new GPS dongle working with APRSIS32 and am still stuck. I initially did not have the "Enables | NMEA" part going, but once I enabled that the screen displayed the expected elements: location and heading boxes, list of anticipated satellites, etc.

Where I'm stuck now is that the GPS data doesn't seem to be "getting into" the program. When i use the USB dongle with the included testing and config program (U-Center 8.26) I can get a position fix, see which satellites are being received, and so forth. So I know Windows 10 is able to work with the dongle.

Also installed is a virtual com port driver, which creates a COM6 for the GPS dongle. I double- and triple-checked the port configuration in APRSIS32 against what shows up in Windows Device Manager (COM#, Baud, Parity, Data Bits, and Stop Bits). Everything matches.

Now, the receiver is very configurable. My hypothesis is that the receiver is sending data in a protocol that the U-Center 8.26 program can decipher, but which APRSIS32 cannot. I think I have also found where I can flash the configuration to the receiver to change how it communicates.

My question is, what must APRSIS32 receive in order to read the data properly? It looks like there are multiple versions if the NMEA protocol. Which one should I tell the receiver to use? Are there any other settings I should look for in the configuration program?
73,
Brandon Clark, KL7BSC


Re: ISS APRS Clip via APRSIS/32

Glenn OConnor <kf0ed@...>
 

Interesting. I'll have to study this more, Lynn.

We've a local ham who's scripted to send via RF, passes of the Fox birds. They'll start showing on my heard list when approaching in range and continue until out of the local range.


On Sat, Oct 19, 2019 at 17:47, Lynn Deffenbaugh
<kj4erj@...> wrote:
See http://aprsisce.wikidot.com/doc:satsrv


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/19/2019 4:28 PM, KD7YZ Bob wrote:
> ok
>
> so this, despite having the ISS Sat-Icon, is generated by Lynn and not over RF?
>
>
>
>




Re: ISS APRS Clip via APRSIS/32

Lynn Deffenbaugh
 

See http://aprsisce.wikidot.com/doc:satsrv


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/19/2019 4:28 PM, KD7YZ Bob wrote:
ok

so this, despite having the ISS Sat-Icon, is generated by Lynn and not over RF?



Re: ISS APRS Clip via APRSIS/32

KD7YZ Bob
 

how about I attach it via the email point rather than the BB-site?


so I attached ISS-Clip.JPG to this

--
73
Bob KD7YZ
AMSAT LM #901


Re: ISS APRS Clip via APRSIS/32

KD7YZ Bob
 

ok

so this, despite having the ISS Sat-Icon, is generated by Lynn and not over RF?


Re: ISS APRS Clip via APRSIS/32

Glenn OConnor <kf0ed@...>
 

I see those occasionally. It's from Lynn's station/server feed, I believe.


On Sat, Oct 19, 2019 at 15:11, KD7YZ Bob
<kd7yz@...> wrote:
Saw this on my "MaP" AND DUNNO WHAT OR WHY IT IS THERE ... THOUGH AT THE EXACT TIME i WAS BOT DECODING iss aprs ON 145.825 AS WELL AS sending CQ an my Pos report.

so how is it I see K4ERJ there ?

Maybe a near overhead pass?

... ahhhh, I see, I took a screen shot and can post it, it seems....

here is a 'copy' of the msg text ...

---------------------------------
ISS
Msg4Pass
Multi: 11/11 Points 1 Parts
ML: }k1lpNgoSz@s2c,N29@)S"g-pN{

Sym: Sat/Pacsat (\S)
App: Experimental (TLE)
FromCtr: 30.4mi SE
FromME: 30.4mi SE (128º)
GridSquare: EM88rf03qb
3813.2639N 08234.6656W
Time: 00-00 19:57:56h
2019-10-19 19:57:57 (8m)
KJ4ERJ-15->TCPIP*
-----------------------------------------------



ISS APRS Clip via APRSIS/32

KD7YZ Bob
 

Saw this on my "MaP" AND DUNNO WHAT OR WHY IT IS THERE ... THOUGH AT THE EXACT TIME i WAS BOT DECODING iss aprs ON 145.825 AS WELL AS sending CQ an my Pos report.

so how is it I see K4ERJ there ?

Maybe a near overhead pass?

... ahhhh, I see, I took a screen shot and can post it, it seems....

here is a 'copy' of the msg text ...

---------------------------------
ISS
Msg4Pass
Multi: 11/11 Points 1 Parts
ML: }k1lpNgoSz@s2c,N29@)S"g-pN{

Sym: Sat/Pacsat (\S)
App: Experimental (TLE)
FromCtr: 30.4mi SE
FromME: 30.4mi SE (128º)
GridSquare: EM88rf03qb
3813.2639N 08234.6656W
Time: 00-00 19:57:56h
2019-10-19 19:57:57 (8m)
KJ4ERJ-15->TCPIP*
-----------------------------------------------


Re: Test

KD7YZ Bob
 

On 10/16/2019 17:29, Michael Wright wrote:
I raise you two "acks." thanks for the transition, worked smooth for me.
Mike K6MFW
--- kj4erj@... wrote:
Copied your test and raising you one "ack".



ACK ACK

seems copied well here

thanks to whomever made the switch for me!!

--
73
Bob KD7YZ
AMSAT LM #901


Group Transfer Status

Lynn Deffenbaugh
 

Here's the group transfer status.  If you own any of the missing files or photos, feel free to re-up them to groups.io.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



-------- Forwarded Message --------
Subject: Your group has been transfered
Date: Wed, 16 Oct 2019 11:47:04 -0700
From: Easy Group Transfer <transfer@groups.io>
To: kj4erj@...


Hello,

The transfer of your Yahoo Group APRSISCE to your Groups.io group APRSISCE is complete.

We've transferred the following parts of your group:

  • Members
  • Messages
  • Photos
  • Files
  • Links
  • Databases

IMPORTANT: Yahoo Groups has been very unreliable lately. If you find that you are missing Photos, Files or Messages, it is because we were unable to export them due to problems with Yahoo Groups. Also, we do not transfer calendar events.

Here are some statistics:

  1. Total Members Processed: 5029
  2. Successfully Added: 4649
  3. Bounced Members (Skipped): 354
  4. Moderated Members: 29
  5. Members on Digest: 703
  6. Undisclosed Emails (Skipped): 8


The following email addresses were not added:

  1. Andrew Downing : Already subscribed
  2. bruce.coates@s...tel.net: Already subscribed
  3. Dale Urban : Already subscribed
  4. David Shrum : Already subscribed
  5. djmunn@big...d.com: Already subscribed
  6. Greg Newberry : Inactive user
  7. jim wheeler : Database Error
  8. Krzysztof Krahel : Database Error
  9. k1plh@ar...et: Database Error
  10. kb8rco@ya...m: Already subscribed
  11. kf6wax@gm...m: Already subscribed
  12. kj4erj@...: Already subscribed
  13. Burt Sammis : Already subscribed
  14. lktaylor@emb...ail.com: Database Error
  15. Min Standen : Already subscribed
  16. thom50669@ya...m: Database Error
  17. Dennie Dunkeson : Already subscribed
  18. Gary Friedlander : Database Error


354 email addresses were not added because they were bouncing.

0 photos were transferred.

The following photos were not transferred, due to problems with Yahoo:

  • K7MT/aprswaterfall.jpg
  • VE6AB/6n4a8162.jpg
  • VE6AB/2014-08-043.jpg
  • KE5EUA-15/imag0006.jpg
  • KE5EUA-15/imag0007.jpg
  • KN5UPS-10/otusb.jpg
  • SoundDoppler/2dopplers.png
  • SoundDoppler/appie1.jpg
  • W5KRO/aprsis.png
  • KC6VVT/121118-kc9pon-11adj.bmp
  • KC6VVT/aprs-bandopening.bmp
  • KA1MZY/aprs.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/ve6xvk_console.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/ve6xvk_aprs_radio_tnc.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/image002.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/image001.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/image007.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/image004.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/image008.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/image009.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/image003.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/image005.jpg
  • VE6XVK WebDT366 Tablet in Vehicle/image006.jpg
  • lifeboat/row.jpg
  • lifeboat/p1012625.jpg
  • lifeboat/awb.jpg
  • lifeboat/p1012623.jpg
  • lifeboat/p1012620.jpg
  • lifeboat/ilb.jpg
  • lifeboat/p1012627.jpg
  • lifeboat/tow.jpg
  • lifeboat/p1012626.jpg
  • KJ4LFJ/2011-07-28 15.16.52.jpg
  • KJ4LFJ/2011-10-24 19.10.38.jpg
  • KJ4LFJ/2011-07-28 15.18.58.jpg
  • KJ4LFJ/reddot.png
  • VE6SRV/aprs_fi screen.png
  • VE6SRV/sat footprint2.png
  • VE6SRV/beacon off aprsisce32.png
  • VE6SRV/beacon off aprsfi.png
  • VE6SRV/multitasking.png
  • VE6SRV/sat footprint.png
  • VE6SRV/aprs war.png
  • VE6SRV/aprsisce_32 screen.png
  • VE6SRV/screen refresh.png
  • KC2ANT/works fine.jpg
  • KC2ANT/errors out.jpg
  • KC2ANT/0412110642.jpg
  • KC2ANT/thunderstorm warning4-26-11.jpg
  • KC2ANT/ohtest.jpg
  • KC2ANT/0412110643.jpg
  • Mac OSX/screen shot 2011-03-06 at 11.20.31 pm.png
  • N9MXQ/aprsisce2.jpg
  • N9MXQ/aprsisce.jpg
  • G3ZJO/aprsis.jpg
  • G3ZJO/aprsis32.jpg
  • Digi Map/ad7zw digi map.png
  • ZL3REW/img_1233.jpg
  • ZL3REW/img_1237.jpg
  • ZL3REW/img_1236.jpg
  • ZL3REW/img_1234.jpg
  • ZL3REW/img_1238.jpg
  • ZL3REW/img_1235.jpg
  • ZL3REW/img_1239.jpg
  • ZL3REW/img_1241.jpg
  • ZL3REW/img_1240.jpg
  • D710, Viliv S5/img_0085.jpg
  • HP_iPAQ/aprsis_ce_ve2khc_20090930 sav.jpg
  • HP_iPAQ/yahoo_aprsis_ce_ve2khc_20090930.jpg

67 files were transferred.

1 links were transferred.

1 databases were transferred.

If you have any questions, please contact support@groups.io.

Cheers,
The Groups.io Team


TH-D74A and GPS

Greg Isringhaus
 

Hey guys.  I'm wanting to do GPS with my TH-D74A over Bluetooth to APRSIS32. 
I had it working before and then I did a firmware upgrade and I lost all my settings.
Can someone help me out to get this going again?

Thanks all!

K0GDI - GREG...


Made the trip

Rob Giuliano
 

Looks like the last messages about starting this group are here, so something is working.


Re: Migration to Groups.IO

David Shrum
 

Sounds good to me, then I'll go ahead and close that Yahoo account there too. I went and closed all my other accounts there, so I'll have no accounts left there.

Thanks Lynn


On Wed, Oct 16, 2019 at 5:48 PM Lynn Deffenbaugh <kj4erj@...> wrote:

I am probably NOT going to migrate it, but simply invite all of the current members.  I don't think there are very many of them and I don't believe there's much history to be lost by not migrating the messages.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/16/2019 5:38 PM, David Shrum wrote:

Now the ONLY yahoo group I'm still a member of it the APRSISMO group.

 

Dave N8PU

 

From: APRSISCE@groups.io On Behalf Of Lynn Deffenbaugh
Sent: Wednesday, October 16, 2019 5:24 PM
To: APRSISCE@groups.io
Subject: Re: [APRSISCE] Migration to Groups.IO

 

There is a cost to the transition for the first year, but I'm not soliciting any reimbursement at this time.  If that changes, I'll let you know.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/16/2019 5:03 PM, Jeff wrote:

This is pretty awesome! Much more user friendly than Yahoo. I now have a reason to actually visit the group again rather than just read the email notifications.

THANK YOU LYNN!

p.s. Was there a cost involved for you, and will you accept donations to offset that?


Re: Migration to Groups.IO

Lynn Deffenbaugh
 

I am probably NOT going to migrate it, but simply invite all of the current members.  I don't think there are very many of them and I don't believe there's much history to be lost by not migrating the messages.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/16/2019 5:38 PM, David Shrum wrote:

Now the ONLY yahoo group I'm still a member of it the APRSISMO group.

 

Dave N8PU

 

From: APRSISCE@groups.io On Behalf Of Lynn Deffenbaugh
Sent: Wednesday, October 16, 2019 5:24 PM
To: APRSISCE@groups.io
Subject: Re: [APRSISCE] Migration to Groups.IO

 

There is a cost to the transition for the first year, but I'm not soliciting any reimbursement at this time.  If that changes, I'll let you know.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/16/2019 5:03 PM, Jeff wrote:

This is pretty awesome! Much more user friendly than Yahoo. I now have a reason to actually visit the group again rather than just read the email notifications.

THANK YOU LYNN!

p.s. Was there a cost involved for you, and will you accept donations to offset that?


Re: Migration to Groups.IO

Randy Love
 

yeah.. if that guy just knew how easy it is to migrate it over to groups.io    ;)

Randy
WF5X


On Wed, Oct 16, 2019 at 5:39 PM David Shrum <dave.n8pu@...> wrote:

Now the ONLY yahoo group I'm still a member of it the APRSISMO group.

 

Dave N8PU

 

From: APRSISCE@groups.io On Behalf Of Lynn Deffenbaugh
Sent: Wednesday, October 16, 2019 5:24 PM
To: APRSISCE@groups.io
Subject: Re: [APRSISCE] Migration to Groups.IO

 

There is a cost to the transition for the first year, but I'm not soliciting any reimbursement at this time.  If that changes, I'll let you know.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/16/2019 5:03 PM, Jeff wrote:

This is pretty awesome! Much more user friendly than Yahoo. I now have a reason to actually visit the group again rather than just read the email notifications.

THANK YOU LYNN!

p.s. Was there a cost involved for you, and will you accept donations to offset that?


Re: Migration to Groups.IO

David Shrum
 

Now the ONLY yahoo group I'm still a member of it the APRSISMO group.

 

Dave N8PU

 

From: APRSISCE@groups.io On Behalf Of Lynn Deffenbaugh
Sent: Wednesday, October 16, 2019 5:24 PM
To: APRSISCE@groups.io
Subject: Re: [APRSISCE] Migration to Groups.IO

 

There is a cost to the transition for the first year, but I'm not soliciting any reimbursement at this time.  If that changes, I'll let you know.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/16/2019 5:03 PM, Jeff wrote:

This is pretty awesome! Much more user friendly than Yahoo. I now have a reason to actually visit the group again rather than just read the email notifications.

THANK YOU LYNN!

p.s. Was there a cost involved for you, and will you accept donations to offset that?


Re: Test

Michael Wright
 

I raise you two "acks." thanks for the transition, worked smooth for me.

Mike K6MFW

--- kj4erj@... wrote:

Copied your test and raising you one "ack".


Re: Migration to Groups.IO

Lynn Deffenbaugh
 

There is a cost to the transition for the first year, but I'm not soliciting any reimbursement at this time.  If that changes, I'll let you know.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/16/2019 5:03 PM, Jeff wrote:
This is pretty awesome! Much more user friendly than Yahoo. I now have a reason to actually visit the group again rather than just read the email notifications.

THANK YOU LYNN!

p.s. Was there a cost involved for you, and will you accept donations to offset that?


Re: Migration to Groups.IO

Jeff
 

This is pretty awesome! Much more user friendly than Yahoo. I now have a reason to actually visit the group again rather than just read the email notifications.

THANK YOU LYNN!

p.s. Was there a cost involved for you, and will you accept donations to offset that?


Re: Test

Lynn Deffenbaugh
 

Copied your test and raising you one "ack".


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/16/2019 4:26 PM, Frank Kostelac wrote: