|
Beacon Time-Only yields Time of (Time 0:00:00)
KD7YZ Bob <kd7yz@...>
So, I have Genius-Beaco9ning set at 5/15 Mins and Time-Only Checked.
I have GPS Disabled since I am a fixed-location, Home. However, when the beacon fires I see what's below.: 1:Fm KD7YZ-15 To APWW10 Via WIDE2-2 <UI pid=F0 Len=34 >[06:21:48] =3829.65N/08300.99W-(Time 0:00:00) I go back and forth, in this APRS learning curve, of allowing a beacon and not-allowing any form of beacon from either the program, or from the Kenwood D710. Maybe it's moot point and I don't need a beacon in a rather unpopulated portion of the country. Well, OK, there is upstate Nevada, Wyoming ...hmmmm GM and thanks for any replies. -- KD7YZ Bob EM88LL
|
|
|
|
Re: APRSIS 32
ve6frc@...
Ok, Thanks for that. Will give it a go shortly.
Thanks again. Fred Cnossen VE6FRC
|
|
|
|
Re: APRSIS 32
Lynn Deffenbaugh
You need the latest development version for "Never" support. Read: http://aprsisce.wikidot.com/doc:development-version Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 2/24/2020 5:53 PM, ve6frc@...
wrote:
Build 2012/08/30 09:19
|
|
|
|
Re: APRSIS 32
ve6frc@...
Build 2012/08/30 09:19
|
|
|
|
Re: APRSIS 32
Lynn Deffenbaugh
What version are you running from Help / About? Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 2/24/2020 3:48 PM, ve6frc@...
wrote:
Here is my options. Might have to scroll to see options.
|
|
|
|
Re: APRSIS 32
ve6frc@...
Here is my options. Might have to scroll to see options.
|
|
|
|
Re: APRSIS 32
Fred Hillhouse
Next time it ask for you to respond, select ‘Never’ rather than “yes” or ‘no’.
Fred N7FMH
From: APRSISCE@groups.io [mailto:APRSISCE@groups.io] On Behalf Of ve6frc@...
Hi Lynn.
|
|
|
|
Re: APRSIS 32
ve6frc@...
Hi Lynn.
The call is VE7LDR and exactly every 15 min. it sends me a TACTICAL alert. It just keeps going till I get a message saying low memory on the computer. If I don't clear it every few days, program crashes.I will try and attach a pic of the options available to me. The options I have are "Yes" "Always" "No" . If you can tell me where the "Never" button is, it would be much appreciated.
|
|
|
|
Re: APRSIS 32
Lynn Deffenbaugh
Don't say "No", say "Never". "No" answers the immediate one. "Never" will not even queue up new ones. Can you tell me who the source call is? I'd really like to know
what s/he's sending that can crash APRSIS32. Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 2/24/2020 2:22 PM, ve6frc@...
wrote:
After lots of searching, can anyone tell me where I have to go to turn off Tactical?. I have this one call who will crash my computer as the APRSIS32 runs out of memory. No matter how many times I say NO to the" Trust TACITAL Assignments From".
|
|
|
|
APRSIS 32
ve6frc@...
After lots of searching, can anyone tell me where I have to go to turn off Tactical?. I have this one call who will crash my computer as the APRSIS32 runs out of memory. No matter how many times I say NO to the" Trust TACITAL Assignments From".
|
|
|
|
Re: APRSIS32 wont TX SMSGTE message
Lynn Deffenbaugh
APRSISCE/32 will only transmit a message on RF if the target
station was recently heard on RF. You can always force it to RF
using the checkbox towards the bottom of the chat. See http://aprsisce.wikidot.com/message-retries
in particular the next-to-last and last paragraphs. Lynn (D) - KJ4ERJ - Author of APRSISCE
for Windows Mobile and Win32
On 2/22/2020 5:42 PM, highclimber03 via
Groups.Io wrote:
Trying to use SMSGTE for messaging thru APRSIS32. I sent massage to "SMSGTE" and enter massage as "@phonenumber message". Issue is, when I send/TX, APRSIS32 wont TX. I tried messaging to a HAM callsign and APRSIS32 will TX. I am using APRSIS32 bluetoothed to a Mobilinked TNC3 to a FT-60. Am I missing a setting not allowing SMSGTE to work?
|
|
|
|
APRSIS32 wont TX SMSGTE message
highclimber03@...
Trying to use SMSGTE for messaging thru APRSIS32. I sent massage to "SMSGTE" and enter massage as "@phonenumber message". Issue is, when I send/TX, APRSIS32 wont TX. I tried messaging to a HAM callsign and APRSIS32 will TX. I am using APRSIS32 bluetoothed to a Mobilinked TNC3 to a FT-60. Am I missing a setting not allowing SMSGTE to work?
Tks Matt KD2PXF
|
|
|
|
Re: Saving configuration across restart
Rob Giuliano
toggle quoted messageShow quoted text
|
|
|
|
Re: Saving configuration across restart
James Ewen
Make the window less than full screen, and exit the program using the exit menu command. There might also be a need for boiled chicken feet and the eye of a newt required as well... James VE6SRV
On Fri, Feb 21, 2020 at 1:33 PM Gil <gil.chapin@...> wrote: I really did try to look this up but I couldn't figure out how to express what I wanted to find in a way that found it...
|
|
|
|
Saving configuration across restart
Gil
I really did try to look this up but I couldn't figure out how to express what I wanted to find in a way that found it...
When I start the software, it is usually not full screen and it has the default map tiles displayed. I always have to change it to what I want. I just can't remember how to force it to remember that configuration and use it the next time the program starts up. I seem to recall it has something to do with how you exit, but I can't come up with it. I presume the instructions for what to display are within the .xml file and I'm not averse to tinkering with that, but I thought there was a way to do it "automatically" without having to edit the .xml file. Please, help me... A mind is a terrible thing to lose. Thanks. Gil, WB2UTI
|
|
|
|
Re: Operate aprs while listening to hf on another band is that possible?
Jack L. Blake Sr (AI4LL)
The 2000 awful big radio for mobile.
On Sat, Feb 15, 2020 at 12:43 PM R. Patrick Ryan <kc6vvt@...> wrote: Eric K9LGE,
|
|
|
|
Re: Operate aprs while listening to hf on another band is that possible?
Eric Lorenz K9LGE
Sorry Pat, my brain glitched...Didn't read the HF part. The radio I referenced was a 2m/440 mobile that was dual-band + APRS output. Eric K9LGE
On Sat, Feb 15, 2020, 11:43 AM R. Patrick Ryan <kc6vvt@...> wrote: Eric K9LGE,
|
|
|
|
Re: Operate aprs while listening to hf on another band is that possible?
Eric Lorenz K9LGE
No...this was a 2m/440 mobile. Eric K9LGE
On Sat, Feb 15, 2020, 11:43 AM R. Patrick Ryan <kc6vvt@...> wrote: Eric K9LGE,
|
|
|
|
Re: 'Red Dot' meaning?
KD7YZ Bob <kd7yz@...>
RR
Tnx! -- -- KD7YZ Bob EM88LL
|
|
|
|
Re: 'Red Dot' meaning?
Lynn Deffenbaugh
Yes, the location of Me is what is used for the posits from APRSIS32. And with the GPS disabled, it should be transmitted based on Time only.
toggle quoted messageShow quoted text
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 2/15/2020 2:32 PM, KD7YZ Bob wrote:
OK . Perfect. Did it.
|
|
|