Date   

Re: AP510

Lynn Deffenbaugh
 

The port type will be Simply(KISS) to avoid having any s.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 2/22/2016 9:00 PM, Kurt ksaves2@... [aprsisce] wrote:
The AP510 works with APRSISCE/32.  The AP510 has to be setup and configured with it's provided utility first.  A user has to master that.
Then, they have to pair the 510 via Bluetooth to their particular Windows setup which is at the stock 9600 bps.
Next they should be able to find it in APRSISCE/32 as a B/T device.  I believe the setup device in APRSISCE/32 is KISS.

Limitations?  The internal GPS of the AP510 is not accessible to your control program be it Xastir, UI-View or YAAC.
But............ it will run concurrently with each side independent.  The example is if one sets up the 510 to be autonomous 
with a -3 nom de plume, it will act in that fashion EVEN IF one also has a control tracking program (ie. APRSISCE/32) bonded at say -5.
Push the red button on the 510 and it will send a packet out from the GPS in the 510 or with whatever timing you programmed with the 
AP510's programming utility.  Hit transmit on APRSISCE/32 and it will
send -5 with the position as sent from the GPS that is attached to the NMEA port of the APRSIS/32 program.  Obviously there will be a problem if a packet is commanded 
at the same exact moment but that is unlikely.

It's a neat dog and pony trick I've tried with APRS Droid and it works.  Two icons with different -numbers closes to each other.
Can compare the GPS in the 510 to whatever GPS you have attached to your tracking program.

Kurt KC9LDH



From: "Don Poaps va7dgp@... [aprsisce]"
To: "aprsisce@..."
Sent: Monday, February 22, 2016 6:26 PM
Subject: Re: [aprsisce] AP510

 
Kiss at 4800? Is the tnc set for 4800?

I will have to google aAP510. I've never heard of that radio.

Don

On Monday, 22 February 2016, clintg777@... [aprsisce] <aprsisce@...> wrote:
 
I do see APRS data coming into APRSISCE now.  I truned off the internet connection and am seeing data now.  Thanks for the reply.  The TNC is built into the AP510 running KISS at 4800. I will try the help terminal test,  thanks


--
Don Poaps
New Westminster, BC
VA7DGP

 





Re: AP510

Kurt Savegnago
 

The AP510 works with APRSISCE/32.  The AP510 has to be setup and configured with it's provided utility first.  A user has to master that.
Then, they have to pair the 510 via Bluetooth to their particular Windows setup which is at the stock 9600 bps.
Next they should be able to find it in APRSISCE/32 as a B/T device.  I believe the setup device in APRSISCE/32 is KISS.

Limitations?  The internal GPS of the AP510 is not accessible to your control program be it Xastir, UI-View or YAAC.
But............ it will run concurrently with each side independent.  The example is if one sets up the 510 to be autonomous 
with a -3 nom de plume, it will act in that fashion EVEN IF one also has a control tracking program (ie. APRSISCE/32) bonded at say -5.
Push the red button on the 510 and it will send a packet out from the GPS in the 510 or with whatever timing you programmed with the 
AP510's programming utility.  Hit transmit on APRSISCE/32 and it will
send -5 with the position as sent from the GPS that is attached to the NMEA port of the APRSIS/32 program.  Obviously there will be a problem if a packet is commanded 
at the same exact moment but that is unlikely.

It's a neat dog and pony trick I've tried with APRS Droid and it works.  Two icons with different -numbers closes to each other.
Can compare the GPS in the 510 to whatever GPS you have attached to your tracking program.

Kurt KC9LDH



From: "Don Poaps va7dgp@... [aprsisce]"
To: "aprsisce@..."
Sent: Monday, February 22, 2016 6:26 PM
Subject: Re: [aprsisce] AP510

 
Kiss at 4800? Is the tnc set for 4800?

I will have to google aAP510. I've never heard of that radio.

Don

On Monday, 22 February 2016, clintg777@... [aprsisce] <aprsisce@...> wrote:
 
I do see APRS data coming into APRSISCE now.  I truned off the internet connection and am seeing data now.  Thanks for the reply.  The TNC is built into the AP510 running KISS at 4800. I will try the help terminal test,  thanks


--
Don Poaps
New Westminster, BC
VA7DGP

 




Re: AP510

Keith VE7GDH
 

Don VA7DGP wrote…

Since this is off shore radio that probably been reversed engineered from either Yaesu or Kenwood.
It may or may not have been reverse engineered, but I can guarantee you it was not reverse engineered from anything by Yaesu or Kenwood.

--
73 Keith VE7GDH
UI-View32
www.ui-view.net


Re: AP510

Wayne R. Graves
 

The AP510 is a Tracker/digipeater that can run standalone or be linked via bluetooth to various software. There is a Yahoo Group AP510@yahoogroups.com

Wayne W0ARP

On 2/22/2016 5:36 PM, Don Poaps va7dgp@gmail.com [aprsisce] wrote:
Since this is off shore radio that probably been reversed engineered
from either yeasu or Kenwood. Who knows what it can do.


http://www.amazon.com/SainSonic-AP510-Transceiver-Bluetooth-Thermometer/dp/B00JLB94IS

Don va7dgp

On Monday, 22 February 2016, Don Poaps <va7dgp@gmail.com
<mailto:va7dgp@gmail.com>> wrote:

Kiss at 4800? Is the tnc set for 4800?

I will have to google aAP510. I've never heard of that radio.

Don

On Monday, 22 February 2016, clintg777@1791.com [aprsisce]
<aprsisce@yahoogroups.com> wrote:

__

I do see APRS data coming into APRSISCE now. I truned off the
internet connection and am seeing data now. Thanks for the
reply. The TNC is built into the AP510 running KISS at 4800. I
will try the help terminal test, thanks



--
*Don Poaps*
*New Westminster, BC*
*VA7DGP*
*
*



--
*Don Poaps*
*New Westminster, BC*
*VA7DGP*
*
*


Re: AP510

Don Poaps
 

Since this is off shore radio that probably been reversed engineered from either yeasu or Kenwood. Who knows what it can do. 


Don va7dgp


On Monday, 22 February 2016, Don Poaps <va7dgp@...> wrote:
Kiss at 4800? Is the tnc set for 4800?

I will have to google aAP510. I've never heard of that radio.

Don

On Monday, 22 February 2016, clintg777@... [aprsisce] <aprsisce@...> wrote:
 

I do see APRS data coming into APRSISCE now.  I truned off the internet connection and am seeing data now.  Thanks for the reply.  The TNC is built into the AP510 running KISS at 4800. I will try the help terminal test,  thanks



--
Don Poaps
New Westminster, BC
VA7DGP

 



--
Don Poaps
New Westminster, BC
VA7DGP

 


Re: AP510

Don Poaps
 

Kiss at 4800? Is the tnc set for 4800?

I will have to google aAP510. I've never heard of that radio.

Don


On Monday, 22 February 2016, clintg777@... [aprsisce] <aprsisce@...> wrote:
 

I do see APRS data coming into APRSISCE now.  I truned off the internet connection and am seeing data now.  Thanks for the reply.  The TNC is built into the AP510 running KISS at 4800. I will try the help terminal test,  thanks



--
Don Poaps
New Westminster, BC
VA7DGP

 


Re: AP510

clintg777@...
 

I do see APRS data coming into APRSISCE now.  I truned off the internet connection and am seeing data now.  Thanks for the reply.  The TNC is built into the AP510 running KISS at 4800. I will try the help terminal test,  thanks


Re: AP510

Don Poaps
 


Can you talk to TNC via a terminal. RMS Express has a Simple Terminal under HELPS. 

I'm not sure where you live but 144.390 will work.  Do you have the TNC baud rate talking to software of PC. I'm not talking about Device Manager serial comport baud rate. This is the baud rate of the TNC. This software must match the TNC or all you see is garbage on the screen.

I don't know what TNC you have but it must be KISS mode or it will not work.

First: What TNC are you using?

Don va7dgp


Don Poaps
New Westminster, BC
VA7DGP

 

On Mon, Feb 22, 2016 at 10:52 AM, clintg777@... [aprsisce] <aprsisce@...> wrote:
 

I have an AP510 tunned to 144.39 but I don't see local traffic on the map.  Should I get APRS info rcvd via the AP510 on the display in APRSIS?


I nay have a rcvr issue with the unit.  I'm also trying to get the TNC up and talking with RMSE Express and not having any luck.  The TNC will transmitt but I can't tell if I'm getting anything out of the rcvr.  Any Ideas?


Is there a config to set up the AP510 to capture the incoming data? I don't see where to set the com port. ??


P.S.  thanks for the help with the code..



AP510

clintg777@...
 

I have an AP510 tunned to 144.39 but I don't see local traffic on the map.  Should I get APRS info rcvd via the AP510 on the display in APRSIS?


I nay have a rcvr issue with the unit.  I'm also trying to get the TNC up and talking with RMSE Express and not having any luck.  The TNC will transmitt but I can't tell if I'm getting anything out of the rcvr.  Any Ideas?


Is there a config to set up the AP510 to capture the incoming data? I don't see where to set the com port. ??


P.S.  thanks for the help with the code..


Re: Program passcode

sbd sbd
 

I went through and caught up with them all. As well as deleting a few posts conserning a site

I also don’t see a request for a passcode

 

Steve

G6UIM

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: 22 February 2016 17:45
To: aprsisce@...
Subject: Re: [aprsisce] Program passcode

 

 

I do not see a request from clintg777@....  If you send an e-mail to APRSISCE-owner@... including your name and callsign, we'll get you a passcode.  As far as I can tell, we're fully caught up with the requests we've received.

See also:  http://aprsisce.wikidot.com/doc:passcode


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 2/22/2016 12:00 PM, Don Poaps va7dgp@... [aprsisce] wrote:

Having a callsign may help Steve and others to figure the issue out.

 

Don va7dgp


Don Poaps

New Westminster, BC

VA7DGP

 

 

On Mon, Feb 22, 2016 at 8:56 AM, clintg777@... [aprsisce] <aprsisce@...> wrote:

 

yes no reply for the last 4 days.

 

 


Re: Program passcode

Lynn Deffenbaugh
 

I do not see a request from clintg777@....  If you send an e-mail to APRSISCE-owner@... including your name and callsign, we'll get you a passcode.  As far as I can tell, we're fully caught up with the requests we've received.

See also:  http://aprsisce.wikidot.com/doc:passcode

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 2/22/2016 12:00 PM, Don Poaps va7dgp@... [aprsisce] wrote:
Having a callsign may help Steve and others to figure the issue out.

Don va7dgp

Don Poaps
New Westminster, BC
VA7DGP

 

On Mon, Feb 22, 2016 at 8:56 AM, clintg777@... [aprsisce] <aprsisce@...> wrote:
 

yes no reply for the last 4 days.




Re: Program passcode

Don Poaps
 

Having a callsign may help Steve and others to figure the issue out.

Don va7dgp

Don Poaps
New Westminster, BC
VA7DGP

 

On Mon, Feb 22, 2016 at 8:56 AM, clintg777@... [aprsisce] <aprsisce@...> wrote:
 

yes no reply for the last 4 days.



Re: Program passcode

clintg777@...
 

yes no reply for the last 4 days.


Re: Internal GPS in Windows 3G Tablet WORKS!

Kurt Savegnago
 

I don't think so.  My Go Phone SIM didn't work period for data or simply making a call.  It's GSM.
The specs are here:  

I bought it to run some dual apps.  The unfortunate thing is the Android side is only 4Gb and I'm still trying to figure out
how to get it to install and run apps from a MicroSD card.  That would offset the small memory allocated to Android.
Windows can do it right off the bat.  Just load everything to the D: drive the MicroSD card acts as.

Will have to have a separate card for Android. Kurt KC9LDH 


From: "'Brian Webster' radiowebst@... [aprsisce]"
To: aprsisce@...
Sent: Sunday, February 21, 2016 2:00 PM
Subject: RE: [aprsisce] Internal GPS in Windows 3G Tablet WORKS!

 
I wonder if this device will work on the T-Mobile Free Data for Life program. That requires an LTE device that is not capable of being a phone. You get 200 MB per month for free after you buy a SIM card for $10. Not a huge amount but for free it’s a good deal.
 
 
Thank You,
Brian N2KGC
 
From: aprsisce@... [mailto:aprsisce@...]
Sent: Sunday, February 21, 2016 1:28 AM
To: aprsisce@...
Subject: [aprsisce] Internal GPS in Windows 3G Tablet WORKS!
 
 
Ok,
 
The Cube i6 3G dual boot tablet (Android/Windows) I reference in the prior note is running the internal GPS
under Windows 10/8.1 using the free programs  GNSSDataInterface
and com0com utility.  Had to stick the NetFramework in first then
install com0com. Generated a virtual com port pair com 5 to com 6 with com0com and  told  GNSSDataInterface  to use com5.  Setup the NMEA serial interface on APRSIS32 to use com 6.  In device manager the com5 and 6 appear under com0com folder not com ports.
 
Nonetheless it works.  The GNSS Broadcom chipset is sending the strings to
APRSIS32 so no B/T GPS is needed now on the Cube i6.  What a P.I.T.A.
 
Next I gotta see if I can get the Android side to load apps on another Micro SD card as there is only 4Gb of internal memory there.  I have a handle on
the adb utility to load ROMs but I don't want to risk dorking a dual boot
device.  I don't know where a reliable stock ROM could be had for the Cube i6.  I dork/bricked a Nexus 7 2013 over 20 times but adb will push a "good" stock ROM onto the N7 with no trouble at all from my Ubuntu box.
 
So in spite of MS$$ messing up with handling internal GPS chipsets in Win10/8.1  this workaround is possible and is going nicely.
 
On a sadder note, the cell phone which lives on the Android 4.4.4 side
looks like it's not compatible with the GSM GO PHONE subscription I have.
I realized that was possible and wasn't a deal breaker for me.  The SIM is
not being recognized.  FYI  the Go Phone I pay $100.00 and have a year to use up 400 minutes.  I was just wanting to be able to make calls but that's all right.
 
Kurt KC9LDH



Re: Program passcode

sbd sbd
 

Have deleted all posts that have the link in them. Including it seems my own.

 

Steve

G6UIM

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: 21 February 2016 20:44
To: APRSIS/CE Yahoo Group
Subject: Re: [aprsisce] Program passcode

 

 

Can we delete that message and any attachments to replies that reference it?

Eric K9LGE

On Feb 21, 2016 2:41 PM, "'Jeff Dugas (Mobile)' N5TEV@... [aprsisce]" <aprsisce@...> wrote:

 

Please do not post APRS passcode cracking sites.

Jeff
N5TEV

-----Original Message-----

"Will Radtke wdradtke@... [aprsisce]" <aprsisce@...> wrote:


Instantly.........Go here:
http://apps.magicbug.co.uk/passcode/

On 2/21/2016 1:54 PM, Rob Giuliano kb8rco@... [aprsisce] wrote:

 

Typically not long at all,

 

I assume you sen the e-mail to: aprsisce-owner@...

with something like:

  callsign:, full name (matching the callsign) and specifically state

 

Robert Giuliano

KB8RCO

 


From: "clintg777@... [aprsisce]"
To: aprsisce@...
Sent: Sunday, February 21, 2016 1:25 PM
Subject: [aprsisce] Program passcode

 

 

How long does it take to get a passcode?

 

 


Re: Program passcode

Eric Lorenz K9LGE
 

Can we delete that message and any attachments to replies that reference it?

Eric K9LGE

On Feb 21, 2016 2:41 PM, "'Jeff Dugas (Mobile)' N5TEV@... [aprsisce]" <aprsisce@...> wrote:
 

Please do not post APRS passcode cracking sites.

Jeff
N5TEV

-----Original Message-----

"Will Radtke wdradtke@... [aprsisce]" <aprsisce@...> wrote:


Instantly.........Go here:
http://apps.magicbug.co.uk/passcode/

On 2/21/2016 1:54 PM, Rob Giuliano kb8rco@... [aprsisce] wrote:
 
Typically not long at all,

I assume you sen the e-mail to: aprsisce-owner@...
with something like:
  callsign:, full name (matching the callsign) and specifically state
 
Robert Giuliano
KB8RCO



From: "clintg777@... [aprsisce]"
To: aprsisce@...
Sent: Sunday, February 21, 2016 1:25 PM
Subject: [aprsisce] Program passcode

 
How long does it take to get a passcode?




Re: Internal GPS in Windows 3G Tablet WORKS!

Brian Webster
 

I wonder if this device will work on the T-Mobile Free Data for Life program. That requires an LTE device that is not capable of being a phone. You get 200 MB per month for free after you buy a SIM card for $10. Not a huge amount but for free it’s a good deal.

 

http://www.t-mobile.com/landing/bring-your-own-tablet.html#compatibility

 

Thank You,

Brian N2KGC

 

From: aprsisce@... [mailto:aprsisce@...]
Sent: Sunday, February 21, 2016 1:28 AM
To: aprsisce@...
Subject: [aprsisce] Internal GPS in Windows 3G Tablet WORKS!

 

 

Ok,

 

The Cube i6 3G dual boot tablet (Android/Windows) I reference in the prior note is running the internal GPS

under Windows 10/8.1 using the free programs  GNSSDataInterface

and com0com utility.  Had to stick the NetFramework in first then

install com0com. Generated a virtual com port pair com 5 to com 6 with com0com and  told  GNSSDataInterface  to use com5.  Setup the NMEA serial interface on APRSIS32 to use com 6.  In device manager the com5 and 6 appear under com0com folder not com ports.

 

Nonetheless it works.  The GNSS Broadcom chipset is sending the strings to

APRSIS32 so no B/T GPS is needed now on the Cube i6.  What a P.I.T.A.

 

Next I gotta see if I can get the Android side to load apps on another Micro SD card as there is only 4Gb of internal memory there.  I have a handle on

the adb utility to load ROMs but I don't want to risk dorking a dual boot

device.  I don't know where a reliable stock ROM could be had for the Cube i6.  I dork/bricked a Nexus 7 2013 over 20 times but adb will push a "good" stock ROM onto the N7 with no trouble at all from my Ubuntu box.

 

So in spite of MS$$ messing up with handling internal GPS chipsets in Win10/8.1  this workaround is possible and is going nicely.

 

On a sadder note, the cell phone which lives on the Android 4.4.4 side

looks like it's not compatible with the GSM GO PHONE subscription I have.

I realized that was possible and wasn't a deal breaker for me.  The SIM is

not being recognized.  FYI  the Go Phone I pay $100.00 and have a year to use up 400 minutes.  I was just wanting to be able to make calls but that's all right.

 

Kurt KC9LDH


Re: ts-2000

Michael
 

Yes, I have a TS-2000 and it works well!

Straight through cable for serial, packet mode, internal tic, and 1200 baud settings on radio. I used sub receiver. 

--Michael



On Feb 20, 2016, at 8:57 PM, ve7xta@... [aprsisce] <aprsisce@...> wrote:

 

Hi Is anyone running APRSIS with a Kenwood TS2000 and get it to work?


Re: Program passcode

Rob Giuliano
 

Typically not long at all,

I assume you sen the e-mail to: aprsisce-owner@...
with something like:
  callsign:, full name (matching the callsign) and specifically state
 
Robert Giuliano
KB8RCO



From: "clintg777@... [aprsisce]"
To: aprsisce@...
Sent: Sunday, February 21, 2016 1:25 PM
Subject: [aprsisce] Program passcode

 
How long does it take to get a passcode?



Re: ts-2000

Adam Mahnke
 

If you do some archive searching, I believe I posted the settings for my TS2000 that I was using. Not at that computer right now

Sent from Outlook Mobile




On Sat, Feb 20, 2016 at 7:25 PM -0800, "Don Poaps va7dgp@... [aprsisce]" <aprsisce@...> wrote:

 

Tom


Don va7dgp, I have a TS2000. How can I help?

Don va7dgp

On Saturday, 20 February 2016, ve7xta@... [aprsisce] <aprsisce@...> wrote:
 

Hi Is anyone running APRSIS with a Kenwood TS2000 and get it to work?



--
Don Poaps
New Westminster, BC
VA7DGP

 

6901 - 6920 of 35507