Thank you Lynn. I’ll give it a try.

Please define "unfollow"? I suspect you have configured a nickname that is set to bring up a MultiTrack or you told it to remember a MultiTrack when you closed it. For the former

Thank you. Another question then. I keep seeing a specific rfid that I need to unfollow. How do I do that?

RF or -IS? On -IS, you can add -b/call-SSID which is a negated buddy filter. On RF, there is no blocking. Note that this doesn't block an -SSID, but a specific callsign-SSID.

Hello all, how owe do you go about blocking a specific ssid. Thanks Rick N9NWI

I wish! Then I could just release it! The current development version is same one that I run here and represents the latest version of the source. APRSISMO, on the other hand, is very

I bet you are using an enhanced APRSIS version, with all triggers, bells and whistles, leaving the rest of us in peril! He he. Regards, J, M0IPU YO3FCA

Wow thanks so much, now the map its really showing. Télécharger Outlook pour Android

Press and hold your right arrow key. That should 'darken' your map. Pressing the left arrow key makes it lighter, or 'faded' 73, Randy WF5X

Guys my map is fading. The object on the map are ok but in the background, the map is fading. I can see it but its almost all white. Any one have this problem? Thanks. Télécharger Outlook pour

APRSISCE/32 doesn't currently support triggers on anything, but I have it on my ToDo list. In particular, I'd like a notification to pop up when my wife's van is approaching home!

(Edited - syntax) Hi Lynn. Great. Tnx. I did actually come across this page (symbols.htm), maybe a couple of years ago. I remember now. I went past swiftly over the SSID defined icons section, quickly

Please see http://www.aprs.net/vm/DOS/SYMBOLS.HTM which documents symbol standards based on the -SSID for when the APRS packet doesn't contain any symbol information. This is also

Hi Randy. To be honest this is the 1st time I see this table, SSID defined icons! I didn't realise icons can be defined by the SSID in APRS. This is very useful in my case, "pure" GPGGA statements.

You're seeing a boat in APRSIS32 because the SSID -8 is a boat since there is no other indicator of symbol. APRS.fi is defaulting it to a red dot tho.. From the APRS spec: 73, Randy WF5X

Hi Lynn. Tnx for coming back on this one. The stn is M0IPU-8, a setup I was playing with on my KAM-XL. I am attaching couple of pics anyway. Re Red Dot, I have also read your Wiki doc on the subject,

What particular station was showing a boat vs a red dot? I'd like to track down and explain the choice of symbol. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile

The first two lines may be a communication link or baud rate connection to your computer from the GPS. Once that function happens the gps is running and linked to your

Hi Brandon, I haven't experimented with APRSISCE GPS yet, but programs working with NMEA normally pick up the GPGGA and GPRMC data as these strings contain position, altitude, speed etc. As long as

Hello group, I found a section of the GPS dongle's configuration utility where you can tell the dongle how to send the NMEA strings. Two of the settings are called "Main Talker ID" and "GSV Talker