I believe that message in the log is an indicator that the OpenTracker is not actually in KISS mode. In other words APRSIS32 is expecting standard KISS output from the OpenTracker, but it's not

I have had ASPSIS32 working fine. Then I touched it. Started poking around, "Wonder what this does?" for a few hours and now it is broke. :| Config: APRSIS32 on Win 10 Open Tracker II in KISS Mode on

Unfortunately, I don't use AGWpe Pro. Most of my work has been with hardware TNCs and recently Direwolf. Let me give an explanation a try: "When I make an APRSIS/32 "Port" I make them in the style I

Thanks, Lynn. Got the grid square turned off now.

Been trying to get a handle on the suggestions from both you as well as Lynn ... for a few days and evenings now. As far as needing or using AGW Monitor, as I see it, the paid version of Packet

Lynn, I think he is referring to the APRS101.PDF, which "shows" 6-character grid squares noted in upper case (page 35: In a Status Report — e.g. IO91SX/-). Normally 6-character grid squares would

If you turn off the GridSquare in your Configure / Status... / Status Report box, this gridsquare will not be included. It's not good practice to transmit a gridsquare in your status report

If you look in the attached file you will see a line in red that tells us that a grid square with the last 2 letters in lower case is not according to specification. I looked through the aprs program

Remember, that if you intend to TX from APRSISce/32 through the AGW port, it will on TX on the KISS PORT ID 0 (zero). So the best method would be: D710/Signalink/AGW combo would be KISS port 0 (zero)

Yikes! So far, I only select Single-Port when dealing with the D710. from any program. -- KD7YZ Bob EM88LL

One option, which might not do everything you want, but will split the decodes into ports is to use AGWmonitor. This is a kind of TCP sniffer for AGW information. It will have a tab for each AGWpe

On Tue, Dec 24, 2019 at 09:03 AM, Lynn Deffenbaugh wrote: ....... > > So, if you ahve a single instance of AGWpe reading both your D710's > audio direct as well as the SDR, you're already receiving

AGWpe supports multiple ports.  They all come over the single TCP/IP port connection to APRSISCE/32.  APRSISCE/32 will receive from all channels and display the receptions, but it can only transmit

Season's greetings Lynn, Rob, Jack: I am using AGWPE (Paid), called "Packet Engine Pro". In AGWPE (PEP) I set up a single TNC from "SoundCard". This Device is the Data-Port-Cable going from the D710

There are many ways, but all require a separate computer application acting as a TNC. Any RTL application to control the RTL dongle will allow the RTL to be the input, the Virtual Audio Cable (VAC)

APRSISCE/32 does not support soundcard decoding.  Look for DireWolf, UZ7HO's SoundModem, or SVG's AGWpe.  There are various ways to interface APRSISCE/32 to these soundcard decoders so you can see

Bob, I have a kenwood D-710 and the data cable. Can you share how you have it hooked up? Jack L. Blake

GM Is there a way I can configure APRSIS32 to hear a soundcard-listed device? I have a couple of virtual audio cables, Line-1, that outputs from an RTL dongle, from 145.825. I would like to have

K tnx fer info. Looked on Aprs.fi at my telemetry and it appears I'm ok. Using my call k7oi-8 for every transmission not an object like Snkrvr. My ant is at 20ft 3db gain and running 10w for now just

My digis follow this recommendation to the T. -- David Andrzejewski E-mail/iMessage/Jabber: david@... PGP Key ID: 736DCF00