How do you get rid of the ME in the setup, I have filled the windows popup 4x, and it still comes up me, I have got the qth down and dragged it to transmit and still ME, Any help

Here are the instructions I have been following : https://robust-packet.net/Robust-Packet-Network-Manual.pdf Specificaly :

Answers interspersed below... The port setting for baud rate is a red herring.  It is not used.  The RF baud rate is completely under the control of the TNC, not APRSIS32.  This dates back to my

Good afternoon, I am putting together an HF APRS station, or attempting to anyways. I am using a TS-2000 and SCS PTC-IIex as hardware. I am using APRSIS32 to control it all. But I am finding it not so

These pages will give you a good start http://wa8lmf.net/aprs/HF_APRS_Notes.htm

You can download APRSIS32 from the following link. You'll likely also want to upgrade to the latest development version immediately after installing and applying your APRS-IS passcode.

Passcode for M1EKM is 13976 This passcode will work for any -SSID (http://aprsisce.wikidot.com/doc:ssids) you choose to use. Because it is actually the APRS-IS network passcode, it should also work

Hallo Lynn I thought I had set up APRSIS on my laptop, about a year ago. For some reason I now cannot find it. I need to use it for an upcoming Scouting event so could I please re-register and

I have not seen any issues with delayed KPC3+ digipeates here in Utah. We pretty much run exclusively with KPc3+ in standalone, so no external software. Kevin N7RXE

Gil, Good suggestion, but it isn't really using a KPC-3+ as a digipeater that is an issue, but using a KPC-3+ in KISS mode with upstream software doing the digipeating. The KPC-3+

Lynn, Perhaps you could enlighten the group about the issues with using a KPC-3 as a digipeater. I am still plagued with "late" digipeats of my mobile APRS station that place me far away from where I

If it works perfectly with the first agw option, tested in vhf, a question which hf frequencies and aprs modes can I use for testing

When using a real TNC, there is no "correct COM port ... for PTT". The serial port only controls protocol communication to the TNC. The TNC's radio port handles the PTT with the radio

I use software N7JJY

I'm running a similar setup (KCP-3, no plus) and I can share what ever settings from my setup. Just let me know what all you are looking for and I can either screen shot, or perhaps send the config

I am trying to setup a Kantronics KPC3+ to use APRSIS32, but I am unable to get my radio to transmit. I have been using a soundcard interface to run APRSIS32 with no issues, but I would like to use my

As far as I know, there are no special settings within APRSIS32 for HF. UZ7HO's SoundModem application is a sofwtare based TNC and its settings take care of the HF vs. VHF/UHF settings. You will

Set the timer to zero if you don't want it. It is very useful for the APRS-IS port because there is a certain failure mode in TCP/IP networking that can cause one end of a connection

Lynn, why is the software using any timers that reset anything? Seems to interfere more than help Chris KB8UIH Sent from my Verizon, Samsung Galaxy smartphone

I hate to say it, but none of that seems to apply to APRSIS32? 7.64 is not a version number of APRSIS32. Versions are date and time stamps. Not sure what a "Kenwood rept" is, and Port