Bonjour Don, what line did you add in your filter to see the Ariss passing by your,around your qth?? i would like to see her if she pass over eastern canada too. 73 from the other end of

Thank You. I've switched the Path to ARISS as mentioned Don Poaps New Westminster, BC VA7DGP DATA VA7QU VOICE Winlink: va7qu@... Subject://wl2k

Guess, this thread got moved to the rgoups.io section. Was a conversation between Fred and I on projects. Although a little off topic ... Anyone interested, the discussion was about the FE-PI AUDIO Z

Cool! Always fun to find interesting parts to use in the next project. I am ordering a few for the

I my D72, I use a path of ARISS. You should use the same path. You don’t need any other path. Best regards, Fred N7FMH

That link is already 'open' here. what my question relates to is: WHERE in the APRSIS32 program running, do I actually type in a filter I may craft? unless I am imbecilic, I see no place on the Link

Correct me if wrong but doesn't control-G only work for Rf gating? I think you want Configure > General, add filter. To modify IS stations. Greg KB3KBR Sent from my Verizon, Samsung Galaxy smartphone

I was looking for the connector that gets soldered into the FE-Pi for plugging into the Pi. I finally found it. I also found 2 more Fe-Pi boards that I forgot I had. That is exciting! Fred N7FMH

Are you just wanting to beacon it? Or do you want to become a satgate? for beaconing you’ll want a path only of “ARISS”. No additional path is needed nor wanted. You’re already on the

Bob, A better means of figuring out filters is to read up on them and understand them rather than just copying examples. http://aprsisce.wikidot.com/aprs-is-filters You can them customize your own

Trying to remove some Red Background and Black Background "D" 's followed some of this thread, and some links off it https://groups.io/g/APRSISCE/topic/34598691#27034 so I can <ctrl> <shift> G and

Lynn, Yes, I only have one instance running as W3KIT. APRSIS is running on my old XP laptop and nothing else is running beside UZ7HO SoundModem. I will try the "NoGate ME" option and see how it

Look at your raw packets. The info page may only show information on the last received packet, not just posits. https://aprs.fi/?c=raw&call=W3KIT But I do still see some posits with

Glenn, thanks for the info. I just look at aprs.fi again, about 10 min ago. Now aprs.fi is showing the RF path, not often though. Most of the time it will show TCPIP and yes, I did unchecked the

I just unchecked my APRSIS beacon box. It seems I operate much as you do. I don’t currently see your symbol however on either aprs.fi or aprsdirect.com. Examine my station-KF0ED.

Hi folks, I have both RF and IS ports enabled. I unchecked "Beacon" under APRS-IS port configuration. Most of the time when I checked the APRS.FI I noticed "W3KIT>APWW11 via TCPIP*,qAC,T2MEXICO"

A few of us in the Vancouver BC area have been pushing APRS. Lately ISS is been coming up. Is there any setting in Path or anywhere else. I'm using a Mobilink TNC3 with a cheap HT normally on 144.390.

I was able to find the setting and turn it off. Working just fine and no *Int* any longer. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

That worked, many thanks. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600

I see it in the scroller. 73, Don W4GCW Where am I? Click link below. https://aprs.fi/#!call=a%2FW4GCW-9&timerange=3600&tail=3600