Date   

Re: igate to rf help

Gene Young <n9mxq@...>
 

As far as I can remember APRSISCE has never supported IP to RF gating

On 3/4/2016 7:03 PM, kb0wlf@... [aprsisce] wrote:
 

I should have added the specific to/from problem.


I send a msg to WHO-IS and the reply from WHO-IS stops at my iGATE box.

it does not tx to rf.


if I watch the igate box, I see the msg being gated and the reply from who-is as well.

just not sent over rf.  so who-is sends msg after msg since it doesn't get an ack from the originator.


same thing with the satsrvr


thanks

kb0wlf




Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com






Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



Re: igate to rf help

kb0wlf@...
 

I should have added the specific to/from problem.


I send a msg to WHO-IS and the reply from WHO-IS stops at my iGATE box.

it does not tx to rf.


if I watch the igate box, I see the msg being gated and the reply from who-is as well.

just not sent over rf.  so who-is sends msg after msg since it doesn't get an ack from the originator.


same thing with the satsrvr


thanks

kb0wlf


Re: igate to rf help

Rob Giuliano
 

I guess I don't really see the point.
To control the network is to break the network.  Routing is controlled by the network and to take routes away means you introduce failures that should not exist. 

If I address a letter to a friend in another state, I don't know or care about the route, just that it gets there.
If a send a request for something over the internet, I don't care the route it takes there either, just that it makes the trip.

Now, as long as you can "prove" that you are "ABLE" to receive messages over RF, you have proven that part of the network is not broken.  This would be for testing purposes - short term one time events: disable the IS side and force only RF. 

Re-enable after so the network is "fully functional".
 
Robert Giuliano
KB8RCO



From: "Chris Curtis kb0wlf@... [aprsisce]"
To: aprsisce@...
Sent: Friday, March 4, 2016 4:40 PM
Subject: [aprsisce] igate to rf help

 
hello, kb0wlf here.

I am NOT interested in sending everything out the rf port ok?
:)

alright, now that that's clear;

I have my digipeater+igate running great.
I'm using aprsisce32 obviously.
it is running on wine in xubuntu.

everything works like it is supposed to except I'm having a hiccup with return messages.

I'm originating a message via rf.
it hits the target via the igate.
I see the target return a msg (spying on the aprsisce32 box)
I do NOT get the message over rf back to the originating device.

I can send a msg from the igate itself to the 'originating' device and it indeed sends it via rf.
I have sent a position report and receive the digipeated packet ok so I know it sees me as local.

how can I add a rule to always send traffic for kb0wlf-1 over rf regardless of 'last heard' ?

hope I've made that clear :)
kb0wlf-10 aprsisce32 1 hop igate
kb0wlf-1 pc in the house 100 yards from my repeater shack.

thanks for your time!

chris
kb0wlf



igate to rf help

Chris Curtis <kb0wlf@...>
 

hello, kb0wlf here.

I am NOT interested in sending everything out the rf port ok?
:)

alright, now that that's clear;

I have my digipeater+igate running great.
I'm using aprsisce32 obviously.
it is running on wine in xubuntu.

everything works like it is supposed to except I'm having a hiccup with return messages.

I'm originating a message via rf.
it hits the target via the igate.
I see the target return a msg (spying on the aprsisce32 box)
I do NOT get the message over rf back to the originating device.

I can send a msg from the igate itself to the 'originating' device and it indeed sends it via rf.
I have sent a position report and receive the digipeated packet ok so I know it sees me as local.

how can I add a rule to always send traffic for kb0wlf-1 over rf regardless of 'last heard' ?

hope I've made that clear :)
kb0wlf-10 aprsisce32 1 hop igate
kb0wlf-1 pc in the house 100 yards from my repeater shack.

thanks for your time!

chris
kb0wlf


APRS balloon SP9UOB-11 expected to reach West Coast on March 5th (probably 11-15 UTC)

Krzysztof SQ5NWI
 

Small foil balloon with CONTESTIA/CW/APRS tracker left Japan air 16
hours ago and is heading to West Coast.

http://aprs.fi/#!mt=roadmap&z=11&call=a%2FSP9UOB-11&timerange=604800&tail=604800
http://tracker.habhub.org/#!mt=roadmap&mz=7&qm=All&mc=32.53613,138.28567&q=sp9uob-11

According to prediction from Tomasz SP9UOB it should reach the range of
ground stations of LA/San Francisco area somewhere between 11 and 15 UTC
on Saturday, 5th.

Tracker works in triple mode:
- Contestia 32/1000 followed by RSID on 432.210MHz USB - transmission
every 5 minutes or every 18 minutes if temperature is lower than -40
Celsius degrees
- CW transmitting "HI" every 30 seconds between Contestia and Callsign
transmitted 30 seconds before Contestia transmission
- APRS every 6 minutes on APRS frequency appropriate for the balloon
location (144.390MHz for US I believe)

To receive and decode Contestia mode you need to use dl-fldigi in HAB mode.
Here you can find details: https://ukhas.org.uk/guides:tracking_guide
Put your attention to RxID or RSID setting which simplifies tracking a lot.

Please, pass this info to everyone who can help to receive even one
single frame from the tracker.
It is powered from battery - no solar panel - and foreseen power down is
in 2-3 days from now, so there is real risk that it will not survive
Pacific fly over.
Anyway, there is still a chance that it will do it!

Thank you in advance for support!

PS. Today we had US balloon guest over Poland. :-) WB8ELK-6 arrived at
morning and flew in North direction, but unfortunately it disappeared
late afternoon over central Poland. I hope we'll see polish balloon over
US on weekend. ;-)

---
Ta wiadomość została sprawdzona na obecność wirusów przez oprogramowanie antywirusowe Avast.
https://www.avast.com/antivirus


Re: Fw: important message

Dave
 

Forgot to add "hang in there Ron" 👍


On Feb 28, 2016, at 12:21 PM, 'Steve' steve@... [aprsisce] <aprsisce@...> wrote:

 

It happens on occasion and nobody is being accused of actually spamming, the spammers get in somehow on occasion and fake an id

 

Steve

G6UIM

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: 28 February 2016 18:10
To: aprsisce@...
Subject: RE: [aprsisce] Fw: important message

 

 

On Sun, 28 Feb 2016 14:19:06 -0000, "'Steve'
steve@... [aprsisce]" <aprsisce@...>
wrote:
> Message removed and the user has been switched to moderated. At least
for
> the time being
>
> Steve
>
> G6UIM
>
> -------------------------
Hi Steve,
I, too, am still fighting this problem. If I'm not already on moderation,
perhaps I'd better be. I have killed my ARRL account, added a 21 character
password and raised he^^ with my ISP. No one seems able (or willing) to
help.

thanks for your patience and 73, Ron
+++++++++++++++++++++++++++++++
>
> FROM: aprsisce@... [mailto:aprsisce@...]
> SENT: 28 February 2016 14:13
> TO: aprsisce@...
> SUBJECT: Re: [aprsisce] Fw: important message
>
> I think you're spewing spam...
>
> Sent from my iPhone
>
> On Feb 28, 2016, at 7:51 AM, norbertchemconsult@... [1]
> [aprsisce] wrote:
>
> Hello!
>
> NEW MESSAGE, PLEASE READ http://123adreszoeken.nl/name.php [3]
>
> norbertchemconsult@... [4]
>
>


Re: Fw: important message

Dave
 

Yup.... That stuff really stinks.....grrrr.    Good luck on getting it resolved.  At minimum... It's  annoying.  73's.  Kc5uta 


On Feb 28, 2016, at 12:21 PM, 'Steve' steve@... [aprsisce] <aprsisce@...> wrote:

 

It happens on occasion and nobody is being accused of actually spamming, the spammers get in somehow on occasion and fake an id

 

Steve

G6UIM

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: 28 February 2016 18:10
To: aprsisce@...
Subject: RE: [aprsisce] Fw: important message

 

 

On Sun, 28 Feb 2016 14:19:06 -0000, "'Steve'
steve@... [aprsisce]" <aprsisce@...>
wrote:
> Message removed and the user has been switched to moderated. At least
for
> the time being
>
> Steve
>
> G6UIM
>
> -------------------------
Hi Steve,
I, too, am still fighting this problem. If I'm not already on moderation,
perhaps I'd better be. I have killed my ARRL account, added a 21 character
password and raised he^^ with my ISP. No one seems able (or willing) to
help.

thanks for your patience and 73, Ron
+++++++++++++++++++++++++++++++
>
> FROM: aprsisce@... [mailto:aprsisce@...]
> SENT: 28 February 2016 14:13
> TO: aprsisce@...
> SUBJECT: Re: [aprsisce] Fw: important message
>
> I think you're spewing spam...
>
> Sent from my iPhone
>
> On Feb 28, 2016, at 7:51 AM, norbertchemconsult@... [1]
> [aprsisce] wrote:
>
> Hello!
>
> NEW MESSAGE, PLEASE READ http://123adreszoeken.nl/name.php [3]
>
> norbertchemconsult@... [4]
>
>


Re: Fw: important message

sbd sbd
 

It happens on occasion and nobody is being accused of actually spamming, the spammers get in somehow on occasion and fake an id

 

Steve

G6UIM

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: 28 February 2016 18:10
To: aprsisce@...
Subject: RE: [aprsisce] Fw: important message

 

 

On Sun, 28 Feb 2016 14:19:06 -0000, "'Steve'
steve@... [aprsisce]" <aprsisce@...>
wrote:
> Message removed and the user has been switched to moderated. At least
for
> the time being
>
> Steve
>
> G6UIM
>
> -------------------------
Hi Steve,
I, too, am still fighting this problem. If I'm not already on moderation,
perhaps I'd better be. I have killed my ARRL account, added a 21 character
password and raised he^^ with my ISP. No one seems able (or willing) to
help.

thanks for your patience and 73, Ron
+++++++++++++++++++++++++++++++
>
> FROM: aprsisce@... [mailto:aprsisce@...]
> SENT: 28 February 2016 14:13
> TO: aprsisce@...
> SUBJECT: Re: [aprsisce] Fw: important message
>
> I think you're spewing spam...
>
> Sent from my iPhone
>
> On Feb 28, 2016, at 7:51 AM, norbertchemconsult@... [1]
> [aprsisce] wrote:
>
> Hello!
>
> NEW MESSAGE, PLEASE READ http://123adreszoeken.nl/name.php [3]
>
> norbertchemconsult@... [4]
>
>


Re: Fw: important message

kc8sfq
 

On Sun, 28 Feb 2016 14:19:06 -0000, "'Steve'
steve@daniels270.eclipse.co.uk [aprsisce]" <aprsisce@yahoogroups.com>
wrote:
Message removed and the user has been switched to moderated. At least
for
the time being

Steve

G6UIM

-------------------------
Hi Steve,
I, too, am still fighting this problem. If I'm not already on moderation,
perhaps I'd better be. I have killed my ARRL account, added a 21 character
password and raised he^^ with my ISP. No one seems able (or willing) to
help.

thanks for your patience and 73, Ron
+++++++++++++++++++++++++++++++

FROM: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com]
SENT: 28 February 2016 14:13
TO: aprsisce@yahoogroups.com
SUBJECT: Re: [aprsisce] Fw: important message

I think you're spewing spam...

Sent from my iPhone

On Feb 28, 2016, at 7:51 AM, norbertchemconsult@tiscali.it [1]
[aprsisce] wrote:

Hello!

NEW MESSAGE, PLEASE READ http://123adreszoeken.nl/name.php [3]

norbertchemconsult@tiscali.it [4]


Re: Fw: important message

sbd sbd
 

It Happens don’t worry

 

Steve

G6UIM

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: 28 February 2016 14:17
To: aprsisce@...
Subject: Re: [aprsisce] Fw: important message

 

 

I didn't post that!  Gene VE6WSO. 

 

On Sunday, February 28, 2016 7:13 AM, "David kc5uta@... [aprsisce]" <aprsisce@...> wrote:

 

 

I think you're spewing spam... 

Sent from my iPhone


On Feb 28, 2016, at 7:51 AM, norbertchemconsult@... [aprsisce] <aprsisce@...> wrote:

 

Hello!

 

New message, please read http://123adreszoeken.nl/name.php

 

 


Re: Fw: important message

sbd sbd
 

Message removed and the user has been switched to moderated. At least for the time being

 

Steve

G6UIM

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: 28 February 2016 14:13
To: aprsisce@...
Subject: Re: [aprsisce] Fw: important message

 

 

I think you're spewing spam... 

Sent from my iPhone


On Feb 28, 2016, at 7:51 AM, norbertchemconsult@... [aprsisce] <aprsisce@...> wrote:

 

Hello!

 

New message, please read http://123adreszoeken.nl/name.php

 

norbertchemconsult@...


Re: Fw: important message

Gene Reif
 

I didn't post that!  Gene VE6WSO. 


On Sunday, February 28, 2016 7:13 AM, "David kc5uta@... [aprsisce]" wrote:


 
I think you're spewing spam... 


On Feb 28, 2016, at 7:51 AM, norbertchemconsult@... [aprsisce] <aprsisce@...> wrote:

 
Hello!
 
New message, please read http://123adreszoeken.nl/name.php
 



Re: Fw: important message

Dave
 

I think you're spewing spam... 


On Feb 28, 2016, at 7:51 AM, norbertchemconsult@... [aprsisce] <aprsisce@...> wrote:

 


Re: AP510

lance aue
 

Fred & the group:

[snip]
Wow! That is huge! My smokes come in a very nice wooden box with a sliding
top (slightly larger than a mobile rig).
Best regards,
Fred N7FMH
PS. Just kidding about my cigar box. I don't smoke nor do I have a cigar
box. ;)
[/snip]

hi hi hi hi hi hi hi hi hi hi hi [<- lol HAM STYLE!}

Very 73,
Lance / KA2EJD
[AR]


Re: AP510

K5DAT
 

On Feb 23, 2016 11:00 AM, "'Fred Hillhouse Jr' fmhillhouse@... [aprsisce]" <aprsisce@...> wrote:
>
> “It's the size of a pack of smokes.” - Wayne
>
> Wow! That is huge! My smokes come in a very nice wooden box with a sliding top (slightly larger than a mobile rig).
>

Pretty funny even if it was fictitious. :-)


Re: AP510

Wayne R. Graves
 

Well I quit smoking in 1970, I guess things have changed a bit since then. :))

Wayne W0ARP

On 2/23/2016 8:59 AM, 'Fred Hillhouse Jr' fmhillhouse@comcast.net [aprsisce] wrote:
It's the size of a pack of smokes. - Wayne

Wow! That is huge! My smokes come in a very nice wooden box with a
sliding top (slightly larger than a mobile rig).

Best regards,

Fred N7FMH

PS. Just kidding about my cigar box. I dont smoke nor do I have a cigar
box. ;)


Re: AP510

Fred Hillhouse
 

It's the size of a pack of smokes.” - Wayne

Wow! That is huge! My smokes come in a very nice wooden box with a sliding top (slightly larger than a mobile rig).

 

Best regards,

Fred N7FMH

 

PS. Just kidding about my cigar box. I don’t smoke nor do I have a cigar box. ;)

 


Re: AP510

Wayne R. Graves
 

It's very low end, It's 1 Watt, that can be set to .5 watt. There are many versions of software available from the yahoo user group. It works ok with an Android and ArpsDroid. If linked to a PC it talks KISS over Bluetooth so it works like any other low budget TNC. It has a low end GPS internal that can only be used by it. If your using one of the latest versions of the software, while it's running and you hold the button down for, I think, 10 seconds, it will transmit an Emergency beacon. I use it as a Low Power APRS transmitter to test my local range as I wonder around my area.
The down side is if you loose the serial cable it comes with you can't get another, you'd have to make a new one. It's tricky to program and lots of people have problems with that. In fact I don't think there is any support for batteries or repairs outside of maybe the yahoo group.
If if you need something inexpensive that can do APRS I have heard people have put these in balloons and airplanes and have found many other uses for them.
I personally did use it with Aprsis32 and it works as well as you would expect a hundred dollar tracker to work. I thought the most interesting thing about it was that it can Digipeat which can be useful if your troubleshooting another APRS unit and you have nothing else at hand. It's the side of a pack of smokes.

Wayne

On 2/23/2016 7:34 AM, Doug Ferrell KD4MOJ lists@kd4moj.org [aprsisce] wrote:
It didn't get very good reviews on Amazon...

...DOUG
KD4MOJ


Re: AP510

Kurt Savegnago
 

I'll try mine again with Simply KISS and see what happens.

Kurt KC9LDH



From: "'Lynn W Deffenbaugh (Mr)' kj4erj@... [aprsisce]"
To: aprsisce@...
Sent: Tuesday, February 23, 2016 8:12 AM
Subject: Re: [aprsisce] AP510

 
A KISS-type port in APRSISCE/32 will add s that put a Kenwood APRS radio's TNC into and out of KISS mode assuming the radio is in Packet mode to start with.  These strings are likely ignored by the AP510, but your port will open and close faster with a Simply(KISS) type port that has no such commands.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 2/23/2016 9:07 AM, Kurt ksaves2@... [aprsisce] wrote:
I can't remember but mine says KISS.  I think I tried simply KISS and it didn't work.
If I'm wrong, try both.  Bottom line is it does work.  I have it running at the moment
on my dual boot Cube i6 which has an internal GPS chipset.  Kurt KC9LDH 




From: "'Lynn W Deffenbaugh (Mr)' kj4erj@... [aprsisce]" mailto:aprsisce@...
To: aprsisce@...
Sent: Monday, February 22, 2016 8:30 PM
Subject: Re: [aprsisce] AP510

 
The port type will be Simply(KISS) to avoid having any s.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 2/22/2016 9:00 PM, Kurt ksaves2@... [aprsisce] wrote:
The AP510 works with APRSISCE/32.  The AP510 has to be setup and configured with it's provided utility first.  A user has to master that.
Then, they have to pair the 510 via Bluetooth to their particular Windows setup which is at the stock 9600 bps.
Next they should be able to find it in APRSISCE/32 as a B/T device.  I believe the setup device in APRSISCE/32 is KISS.

Limitations?  The internal GPS of the AP510 is not accessible to your control program be it Xastir, UI-View or YAAC.
But............ it will run concurrently with each side independent.  The example is if one sets up the 510 to be autonomous 
with a -3 nom de plume, it will act in that fashion EVEN IF one also has a control tracking program (ie. APRSISCE/32) bonded at say -5.
Push the red button on the 510 and it will send a packet out from the GPS in the 510 or with whatever timing you programmed with the 
AP510's programming utility.  Hit transmit on APRSISCE/32 and it will
send -5 with the position as sent from the GPS that is attached to the NMEA port of the APRSIS/32 program.  Obviously there will be a problem if a packet is commanded 
at the same exact moment but that is unlikely.

It's a neat dog and pony trick I've tried with APRS Droid and it works.  Two icons with different -numbers closes to each other.
Can compare the GPS in the 510 to whatever GPS you have attached to your tracking program.

Kurt KC9LDH



From: "Don Poaps va7dgp@... [aprsisce]" mailto:aprsisce@...
To: mailto:aprsisce@... mailto:aprsisce@...
Sent: Monday, February 22, 2016 6:26 PM
Subject: Re: [aprsisce] AP510

 
Kiss at 4800? Is the tnc set for 4800?

I will have to google aAP510. I've never heard of that radio.

Don

On Monday, 22 February 2016, clintg777@... [aprsisce] <aprsisce@...> wrote:
 
I do see APRS data coming into APRSISCE now.  I truned off the internet connection and am seeing data now.  Thanks for the reply.  The TNC is built into the AP510 running KISS at 4800. I will try the help terminal test,  thanks


--
Don Poaps
New Westminster, BC
VA7DGP

 










Re: AP510

Kurt Savegnago
 

It's an involved learning curve.  The provided USB cable needs to be used and is a counterfeit chip.  Have to use an
older prolific driver.  Have to manually add some .dll type stuff to the windows directory but the online video
is pretty clear about it. 
Then the setup program has to be mastered.
Updating firmware is a knack.
Once running, it's a nice 1 watt tracker.  Kurt KC9LDH



From: "Doug Ferrell KD4MOJ lists@... [aprsisce]"
To: aprsisce@...
Sent: Tuesday, February 23, 2016 8:34 AM
Subject: Re: [aprsisce] AP510

 
It didn't get very good reviews on Amazon...

...DOUG
KD4MOJ



7041 - 7060 of 35670