Date   

Re: D710G

Randy Love
 

The RT Systems cable is an FTDI based cable, so it shouldn't jump around on port numbers when plugged into the same PC.

Randy
WF5X

On Tue, Oct 12, 2021 at 1:09 PM Adam Mahnke <kc2ant@...> wrote:
Rob, it very well could be either, or both.

On Tue, Oct 12, 2021 at 1:08 PM Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:
Okay - I see the issue seems to be a port issue.
Sorry for the confusion.

Robert Giuliano
KB8RCO



On Tuesday, October 12, 2021, 01:05:47 PM EDT, Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:


It sounds like the application is unable to write to the APRSIS32.xml file.
Most likely you either:
a) Didn't extract the APRSIS32.exe file from the Zip file
b) Extracted it into a restricted folder. 
    Windows 7 and above restrict access to Program Files and Program Files (x86).
    Also, newer versions of Windows 10 restrict every folder outside the users home folder.

Solution:
Create a folder off the root filesystem (C:\).  I like to use C:\MyApps or C:\WinApps.
   Right-click the folder you created and choose Properties.
   Click the Security tab
   Click the Edit button, and give each entry Full control.
      Administrator should alreasy have it, but Authenticated User and Users probably will not.
Now create a desired folder structure for your apps
   EXAMPLE:  C:\MyApps\Radio\APRSIS32
       This gives a group for all your radio apps, which APRSIS32 is one of.
       I typically have C:\MyApps\Electronics with Ardiono IDE and some other apps, etc.

Extract the zip file or APRSIS32.exe out of it, into  the new APRSIS32 folder.
Create a desktop shortcut with the path set to this new structure and run it that way.

Robert Giuliano
KB8RCO



On Tuesday, October 12, 2021, 12:30:58 PM EDT, JR Riner <ke4pmp@...> wrote:


Well I see one issue.  The info I put in when creating a new port is no longer there. It is greyed out.  That is twice now I have had to re-create the port.
73, ke4pmp


Re: D710G

Adam Mahnke
 

Rob, it very well could be either, or both.


On Tue, Oct 12, 2021 at 1:08 PM Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:
Okay - I see the issue seems to be a port issue.
Sorry for the confusion.

Robert Giuliano
KB8RCO



On Tuesday, October 12, 2021, 01:05:47 PM EDT, Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:


It sounds like the application is unable to write to the APRSIS32.xml file.
Most likely you either:
a) Didn't extract the APRSIS32.exe file from the Zip file
b) Extracted it into a restricted folder. 
    Windows 7 and above restrict access to Program Files and Program Files (x86).
    Also, newer versions of Windows 10 restrict every folder outside the users home folder.

Solution:
Create a folder off the root filesystem (C:\).  I like to use C:\MyApps or C:\WinApps.
   Right-click the folder you created and choose Properties.
   Click the Security tab
   Click the Edit button, and give each entry Full control.
      Administrator should alreasy have it, but Authenticated User and Users probably will not.
Now create a desired folder structure for your apps
   EXAMPLE:  C:\MyApps\Radio\APRSIS32
       This gives a group for all your radio apps, which APRSIS32 is one of.
       I typically have C:\MyApps\Electronics with Ardiono IDE and some other apps, etc.

Extract the zip file or APRSIS32.exe out of it, into  the new APRSIS32 folder.
Create a desktop shortcut with the path set to this new structure and run it that way.

Robert Giuliano
KB8RCO



On Tuesday, October 12, 2021, 12:30:58 PM EDT, JR Riner <ke4pmp@...> wrote:


Well I see one issue.  The info I put in when creating a new port is no longer there. It is greyed out.  That is twice now I have had to re-create the port.
73, ke4pmp


Re: D710G

Rob Giuliano
 

Okay - I see the issue seems to be a port issue.
Sorry for the confusion.

Robert Giuliano
KB8RCO



On Tuesday, October 12, 2021, 01:05:47 PM EDT, Rob Giuliano via groups.io <kb8rco@...> wrote:


It sounds like the application is unable to write to the APRSIS32.xml file.
Most likely you either:
a) Didn't extract the APRSIS32.exe file from the Zip file
b) Extracted it into a restricted folder. 
    Windows 7 and above restrict access to Program Files and Program Files (x86).
    Also, newer versions of Windows 10 restrict every folder outside the users home folder.

Solution:
Create a folder off the root filesystem (C:\).  I like to use C:\MyApps or C:\WinApps.
   Right-click the folder you created and choose Properties.
   Click the Security tab
   Click the Edit button, and give each entry Full control.
      Administrator should alreasy have it, but Authenticated User and Users probably will not.
Now create a desired folder structure for your apps
   EXAMPLE:  C:\MyApps\Radio\APRSIS32
       This gives a group for all your radio apps, which APRSIS32 is one of.
       I typically have C:\MyApps\Electronics with Ardiono IDE and some other apps, etc.

Extract the zip file or APRSIS32.exe out of it, into  the new APRSIS32 folder.
Create a desktop shortcut with the path set to this new structure and run it that way.

Robert Giuliano
KB8RCO



On Tuesday, October 12, 2021, 12:30:58 PM EDT, JR Riner <ke4pmp@...> wrote:


Well I see one issue.  The info I put in when creating a new port is no longer there. It is greyed out.  That is twice now I have had to re-create the port.
73, ke4pmp


Re: D710G

Rob Giuliano
 

It sounds like the application is unable to write to the APRSIS32.xml file.
Most likely you either:
a) Didn't extract the APRSIS32.exe file from the Zip file
b) Extracted it into a restricted folder. 
    Windows 7 and above restrict access to Program Files and Program Files (x86).
    Also, newer versions of Windows 10 restrict every folder outside the users home folder.

Solution:
Create a folder off the root filesystem (C:\).  I like to use C:\MyApps or C:\WinApps.
   Right-click the folder you created and choose Properties.
   Click the Security tab
   Click the Edit button, and give each entry Full control.
      Administrator should alreasy have it, but Authenticated User and Users probably will not.
Now create a desired folder structure for your apps
   EXAMPLE:  C:\MyApps\Radio\APRSIS32
       This gives a group for all your radio apps, which APRSIS32 is one of.
       I typically have C:\MyApps\Electronics with Ardiono IDE and some other apps, etc.

Extract the zip file or APRSIS32.exe out of it, into  the new APRSIS32 folder.
Create a desktop shortcut with the path set to this new structure and run it that way.

Robert Giuliano
KB8RCO



On Tuesday, October 12, 2021, 12:30:58 PM EDT, JR Riner <ke4pmp@...> wrote:


Well I see one issue.  The info I put in when creating a new port is no longer there. It is greyed out.  That is twice now I have had to re-create the port.
73, ke4pmp


Re: D710G

Adam Mahnke
 

Does the RT Systems cable have port retention? It should be a USB-Serial adaptor. I have the kenwood cable, and then I use a USB-Serial adapter cable from startech. It's another connection, but it works fine for me.

silly question. Is your RT Systems cable plugged into the radio body, or the radio head? For programming memories and what not I plug into the radio body, for interfacing with APRSISCE you have to plug into the remote head unit. I'd have to pull the manual again to be sure about the memories, but I know for sure (used it this past Sunday) that the cable goes from the radio head to the PC/Laptop/whatever.



On Tue, Oct 12, 2021 at 12:46 PM JR Riner <ke4pmp@...> wrote:
Okay, I see you said serial adapter.  I am using the RT systems usb cable.  I was told this should work.  If not then that would be the problem.  What do I need? I have a serial adapter but need some other type cable to go to radio I assume?
Thanks,
ke4pmp


Re: D710G

JR Riner
 

Okay, I see you said serial adapter.  I am using the RT systems usb cable.  I was told this should work.  If not then that would be the problem.  What do I need? I have a serial adapter but need some other type cable to go to radio I assume?
Thanks,
ke4pmp


Re: D710G

Adam Mahnke
 

Is APRSISCE set up to look at 12?
Is the COM Port that you're plugged into actually 12?

Do your com speeds match between the radio and the PC?

On Tue, Oct 12, 2021 at 12:44 PM JR Riner <ke4pmp@...> wrote:
I found the log.  It is definitely a port error. I get error opening port 12, but device manager says it is working properly.
ke4pmp


Re: D710G

JR Riner
 

I found the log.  It is definitely a port error. I get error opening port 12, but device manager says it is working properly.
ke4pmp


Re: D710G

Adam Mahnke
 

Ok, I'd give the instructions a go again. 

one question, Do you have the radio hooked to a USB port, or a standard serial? A lot of times what happens is the COM port changes with the USB-Serial adapter when it is unplugged and plugged back in which will break the connection between the radio and the computer until the COM ports match. 

On Tue, Oct 12, 2021 at 12:41 PM JR Riner <ke4pmp@...> wrote:
Yes that is the page I am on.
ke4pmp


Re: D710G

JR Riner
 

Yes that is the page I am on.
ke4pmp


Re: D710G

Adam Mahnke
 

Are you following this one?


or one of the other pages?

On Tue, Oct 12, 2021 at 12:30 PM JR Riner <ke4pmp@...> wrote:
Well I see one issue.  The info I put in when creating a new port is no longer there. It is greyed out.  That is twice now I have had to re-create the port.
73, ke4pmp


Re: D710G

JR Riner
 

Well I see one issue.  The info I put in when creating a new port is no longer there. It is greyed out.  That is twice now I have had to re-create the port.
73, ke4pmp


Re: D710G

Adam Mahnke
 

That works. If you can give screen shots of your settings related to the D710 port that you have configured, it's a place to start

Adam
KC2ANT

On Tue, Oct 12, 2021 at 12:19 PM JR Riner <ke4pmp@...> wrote:
I can do a screenshot. I guess I'm a DA not understanding the export deal.
73, ke4pmp


Re: D710G

JR Riner
 

I can do a screenshot. I guess I'm a DA not understanding the export deal.
73, ke4pmp


Re: D710G

Adam Mahnke
 

Can you paste your RF port settings out of the xml file for review?

Sounds like your radio isn't talking to the software, could be a few different things. 

Adam
KC2ANT

On Tue, Oct 12, 2021 at 12:08 PM JR Riner <ke4pmp@...> wrote:
I have read & followed the wiki & menu 604 is on, but I don't seem to be receiving any traffic to the map with the internet disconnected which is how I want it to work.  I just want to see the stations I hear via RF. The radio has gps lock and is beaconing and it shows my proper location on aprs.fi however aprsisce shows my location at home home qth where it last pinged I'm guessing.  I did not set a fixed location in the 710 it just using iGPS.  Any tips would sure be appreciated.
73, KE4PMP-9


D710G

JR Riner
 

I have read & followed the wiki & menu 604 is on, but I don't seem to be receiving any traffic to the map with the internet disconnected which is how I want it to work.  I just want to see the stations I hear via RF. The radio has gps lock and is beaconing and it shows my proper location on aprs.fi however aprsisce shows my location at home home qth where it last pinged I'm guessing.  I did not set a fixed location in the 710 it just using iGPS.  Any tips would sure be appreciated.
73, KE4PMP-9


Re: Setting up Direwolf on Raspberry Pi 4

Rob Giuliano
 

Okay, I understand Steve responding at these times, but you are on the east coast of the U.S. - unless on vacation.

I just copied over the entire folder structure from my (working forever) Kubuntu machine.
   NOTE: Uses tile database.  I was previously using folder structure.
Copied it to a Windows 10 machine - all is well.
Put it on the Pi4 -same issue with moving around the map cause it to hand, then close.

Started APRSIS32 on the Pi4, zoomed out until the yellow circle appeared.
   System froze, and about 1 minute later app closed.
Renamed log files with "Pi4_" prefix.
Copied all files and folders to a thumb drive, then ran from thumb drive on Windows 10.

Attached 2 logfiles:
Pi4_APRSIS32.log      => from Pi4
APRSIS32.log             => from Windows 10

Also attached the XML used.

NOTE: This is running on a Pi4 under Box86 and WINE.
            I am confident in WINE, but this is the first attempt at using it under Box86.
            I imagine the issue is somewhere in that portion of the install.

In other words, don't beat your head too hard over this!
BUT ...  I am sure there are lots of folks who would be interested, if/when it works on a Pi.

Robert Giuliano
KB8RCO



On Tuesday, October 12, 2021, 04:49:00 AM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:


Hm, this is interesting.  Have you tried this exact same tileset configuration in APRSIS32 directly under Windows?  Like copy the entire APRSIS32.XML file into a new Windows directory and try it there.  And what APRSIS32.EXE version is this under Wine?  Hopefully the latest development .EXE?

CURLE_BAD_FUNCTION_ARGUMENT (43)

A function was called with a bad parameter.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32


On 10/12/2021 4:41 AM, Lynn Deffenbaugh wrote:

That's a different log than you posted before.  Now I need to go figure out what an error 43 means coming back from curl.

CURL:OSMQueue(5):2021-10-12T02:39:44.855 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/757.png) Failed with 43

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 10/11/2021 10:44 PM, Rob Giuliano via groups.io wrote:
I think I am requesting them through port 80
But here is the xml section:

<OSM.Zoom>11</OSM.Zoom>
<OSM.Percent>90</OSM.Percent>
<OSM.MinMBFree>100</OSM.MinMBFree>
<OSM.PurgeDisabled>1</OSM.PurgeDisabled>
<OSM.Name>Original</OSM.Name>
<OSM.Server>tile.openstreetmap.org</OSM.Server>
<OSM.Port>80</OSM.Port>
<OSM.URLPrefix>/</OSM.URLPrefix>
<OSM.UseHTTPS>0</OSM.UseHTTPS>
<OSM.SupportsStatus>0</OSM.SupportsStatus>
<Path>./OSMTiles/</Path>
<OSM.MBTiles></OSM.MBTiles>
<OSM.PurgeEnabled>0</OSM.PurgeEnabled>
<OSM.RetainDays>7</OSM.RetainDays>
<OSM.RetainZoom>8</OSM.RetainZoom>
<OSM.MinServerZoom>0</OSM.MinServerZoom>
<OSM.MaxServerZoom>18</OSM.MaxServerZoom>
<OSM.RevisionHours>0</OSM.RevisionHours>

<!--TileServer[0]-->
<TileServer Name="Original">
<Server>tile.openstreetmap.org</Server>
<Port>80</Port>
<URLPrefix>/</URLPrefix>
<UseHTTPS>0</UseHTTPS>
<SupportsStatus>0</SupportsStatus>
<Path>./OSMTiles/</Path>
<MBTiles></MBTiles>
<PurgeEnabled>0</PurgeEnabled>
<RetainDays>7</RetainDays>
<RetainZoom>8</RetainZoom>
<MinServerZoom>0</MinServerZoom>
<MaxServerZoom>18</MaxServerZoom>
<RevisionHours>0</RevisionHours>
</TileServer>
<!--TileServer[0]-->

Loads just fine and runs, but as soon as I move to an area that I don't have a map for, it locks, then closes.
See log below.

Robert Giuliano
KB8RCO

New log:
OSM:OSMMonitor:2021-10-12T02:38:59.626 GetDiskFreeSpace(OSMTiles/) Gave 8*512=4096
OSM:OSMMonitor:2021-10-12T02:38:59.834 [Original]@00163268 566 Files in 6803911/7991296 Bytes on OSMTiles/
OSM:OSMMonitor:2021-10-12T02:38:59.835  Month:   566   6.49/  7.62MB
OSM:OSMMonitor:2021-10-12T02:38:59.836  Total:   566   6.49/  7.62MB
Config:WinMain:2021-10-12T02:39:12.795 WM_CLOSE Object ending with Cancel
Timer:WinMain:2021-10-12T02:39:12.844 hwndMain:MainWindowProc(0001004E WM_COMMAND 0000CABD 00000000) took 49.3sec (previous 1.0sec)
Port(DW_Local):Port(DW_Local):2021-10-12T02:39:16.114 connect errno 10061
OSM:WinMain:2021-10-12T02:39:44.599 OSMIsTileSetCompatible:X/Y [45] NeedX NeedY
OSM:OSMQueue(5):2021-10-12T02:39:44.717 Thread[5] httpGet(/11/542/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.718 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.719 CURL fetching http://tile.openstreetmap.org:80/11/542/757.png
OSM:WinMain:2021-10-12T02:39:44.766 OSMGetTileInfo:Growing Cache To 64 (Max 405)
OSM:OSMQueue(0):2021-10-12T02:39:44.775 Thread[0] httpGet(/11/542/760.png) From tile.openstreetmap.org:80
CURL:OSMQueue(0):2021-10-12T02:39:44.776 Thread[0] httpGet(http://tile.openstreetmap.org:80/11/542/760.png)
CURL:OSMQueue(0):2021-10-12T02:39:44.776 CURL fetching http://tile.openstreetmap.org:80/11/542/760.png
CURL:OSMQueue(5):2021-10-12T02:39:44.855 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/757.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.856 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.858 httpGetURL(http://tile.openstreetmap.org:80/11/542/757.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.863 httpGet(http://tile.openstreetmap.org:80/11/542/757.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:2 Total:138 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.865 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 757
OSM:OSMQueue(5):2021-10-12T02:39:44.869 Thread[5] httpGet(/11/542/758.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.870 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/758.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.870 CURL fetching http://tile.openstreetmap.org:80/11/542/758.png
CURL:OSMQueue(5):2021-10-12T02:39:44.933 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/758.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.934 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.935 httpGetURL(http://tile.openstreetmap.org:80/11/542/758.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.935 httpGet(http://tile.openstreetmap.org:80/11/542/758.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:1 Total:64 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.936 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 758
OSM:OSMQueue(5):2021-10-12T02:39:44.938 Thread[5] httpGet(/11/542/759.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.939 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/759.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.939 CURL fetching http://tile.openstreetmap.org:80/11/542/759.png
CURL:OSMQueue(5):2021-10-12T02:39:44.996 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/759.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.997 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.997 httpGetURL(http://tile.openstreetmap.org:80/11/542/759.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.998 httpGet(http://tile.openstreetmap.org:80/11/542/759.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:0 Total:58 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.999 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 759
OSM:OSMQueue(5):2021-10-12T02:39:45.018 Thread[5] httpGet(/11/541/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:45.018 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/541/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:45.019 CURL fetching http://tile.openstreetmap.org:80/11/541/757.png
CURL:OSMQueue(5):2021-10-12T02:39:45.078 curl_easy_perform(http://tile.openstreetmap.org:80/11/541/757.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:45.079 error message:
CURL:OSMQueue(5):2021-10-12T02:39:45.079 httpGetURL(http://tile.openstreetmap.org:80/11/541/757.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:45.080 httpGet(http://tile.openstreetmap.org:80/11/541/757.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:0 Total:61 (0 Bytes)
OSM:OSMQueueOSM:WinMain:2021-10-12T02:39:44.599 OSMIsTileSetCompatible:X/Y [45] NeedX NeedY
OSM:OSMQueue(5):2021-10-12T02:39:44.717 Thread[5] httpGet(/11/542/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.718 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.719 CURL fetching http://tile.openstreetmap.org:80/11/542/757.png
OSM:WinMain:2021-10-12T02:39:44.766 OSMGetTileInfo:Growing Cache To 64 (Max 405)
OSM:OSMQueue(0):2021-10-12T02:39:44.775 Thread[0] httpGet(/11/542/760.png) From tile.openstreetmap.org:80
CURL:OSMQueue(0):2021-10-12T02:39:44.776 Thread[0] httpGet(http://tile.openstreetmap.org:80/11/542/760.png)
CURL:OSMQueue(0):2021-10-12T02:39:44.776 CURL fetching http://tile.openstreetmap.org:80/11/542/760.png
OSM:WinMain:2021-10-12T02:39:45.209 OSM(g0):1623x985@11=13/14/0/45L B:0.4(S:0.1) W:0.2 (X/Y [45] NeedX NeedY)
Timer:WinMain:2021-10-12T02:39:45.866 hwndMain:rcPaint(Circle:1623x985) took 1.3sec (previous 1.0sec)
CPU:WinMain:2021-10-12T02:39:45.871 New Thread: 96(OSMQueue(0)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.871 New Thread: 100(OSMQueue(1)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.872 New Thread: 104(OSMQueue(2)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.873 New Thread: 108(OSMQueue(3)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.874 New Thread: 116(OSMQueue(5)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.875 New Thread: 112(OSMQueue(4)) Up: 1sec
Timer:WinMain:2021-10-12T02:39:45.877 hwndMain:Paint(RCs) took 1.3sec (previous 1.0sec)
Timer:WinMain:2021-10-12T02:39:46.837 hwndLog(OSM):DispatchMessage(00040120 WM_TIMER 0000000A 00000000) took 0.1sec (previous 0.1sec)
Port(DW_Local):Port(DW_Local):2021-10-12T02:40:16.207 connect errno 10061
Timer:WinMain:2021-10-12T02:40:24.897 hwndEdit(OSM):DispatchMessage(00010128 WM_NCLBUTTONDOWN 00000007 02850594) took 0.7sec (previous 0.1sec)


Re: Setting up Direwolf on Raspberry Pi 4

Lynn Deffenbaugh
 

Hm, this is interesting.  Have you tried this exact same tileset configuration in APRSIS32 directly under Windows?  Like copy the entire APRSIS32.XML file into a new Windows directory and try it there.  And what APRSIS32.EXE version is this under Wine?  Hopefully the latest development .EXE?

CURLE_BAD_FUNCTION_ARGUMENT (43)

A function was called with a bad parameter.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 10/12/2021 4:41 AM, Lynn Deffenbaugh wrote:

That's a different log than you posted before.  Now I need to go figure out what an error 43 means coming back from curl.

CURL:OSMQueue(5):2021-10-12T02:39:44.855 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/757.png) Failed with 43

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 10/11/2021 10:44 PM, Rob Giuliano via groups.io wrote:
I think I am requesting them through port 80
But here is the xml section:

<OSM.Zoom>11</OSM.Zoom>
<OSM.Percent>90</OSM.Percent>
<OSM.MinMBFree>100</OSM.MinMBFree>
<OSM.PurgeDisabled>1</OSM.PurgeDisabled>
<OSM.Name>Original</OSM.Name>
<OSM.Server>tile.openstreetmap.org</OSM.Server>
<OSM.Port>80</OSM.Port>
<OSM.URLPrefix>/</OSM.URLPrefix>
<OSM.UseHTTPS>0</OSM.UseHTTPS>
<OSM.SupportsStatus>0</OSM.SupportsStatus>
<Path>./OSMTiles/</Path>
<OSM.MBTiles></OSM.MBTiles>
<OSM.PurgeEnabled>0</OSM.PurgeEnabled>
<OSM.RetainDays>7</OSM.RetainDays>
<OSM.RetainZoom>8</OSM.RetainZoom>
<OSM.MinServerZoom>0</OSM.MinServerZoom>
<OSM.MaxServerZoom>18</OSM.MaxServerZoom>
<OSM.RevisionHours>0</OSM.RevisionHours>

<!--TileServer[0]-->
<TileServer Name="Original">
<Server>tile.openstreetmap.org</Server>
<Port>80</Port>
<URLPrefix>/</URLPrefix>
<UseHTTPS>0</UseHTTPS>
<SupportsStatus>0</SupportsStatus>
<Path>./OSMTiles/</Path>
<MBTiles></MBTiles>
<PurgeEnabled>0</PurgeEnabled>
<RetainDays>7</RetainDays>
<RetainZoom>8</RetainZoom>
<MinServerZoom>0</MinServerZoom>
<MaxServerZoom>18</MaxServerZoom>
<RevisionHours>0</RevisionHours>
</TileServer>
<!--TileServer[0]-->

Loads just fine and runs, but as soon as I move to an area that I don't have a map for, it locks, then closes.
See log below.

Robert Giuliano
KB8RCO

New log:
OSM:OSMMonitor:2021-10-12T02:38:59.626 GetDiskFreeSpace(OSMTiles/) Gave 8*512=4096
OSM:OSMMonitor:2021-10-12T02:38:59.834 [Original]@00163268 566 Files in 6803911/7991296 Bytes on OSMTiles/
OSM:OSMMonitor:2021-10-12T02:38:59.835  Month:   566   6.49/  7.62MB
OSM:OSMMonitor:2021-10-12T02:38:59.836  Total:   566   6.49/  7.62MB
Config:WinMain:2021-10-12T02:39:12.795 WM_CLOSE Object ending with Cancel
Timer:WinMain:2021-10-12T02:39:12.844 hwndMain:MainWindowProc(0001004E WM_COMMAND 0000CABD 00000000) took 49.3sec (previous 1.0sec)
Port(DW_Local):Port(DW_Local):2021-10-12T02:39:16.114 connect errno 10061
OSM:WinMain:2021-10-12T02:39:44.599 OSMIsTileSetCompatible:X/Y [45] NeedX NeedY
OSM:OSMQueue(5):2021-10-12T02:39:44.717 Thread[5] httpGet(/11/542/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.718 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.719 CURL fetching http://tile.openstreetmap.org:80/11/542/757.png
OSM:WinMain:2021-10-12T02:39:44.766 OSMGetTileInfo:Growing Cache To 64 (Max 405)
OSM:OSMQueue(0):2021-10-12T02:39:44.775 Thread[0] httpGet(/11/542/760.png) From tile.openstreetmap.org:80
CURL:OSMQueue(0):2021-10-12T02:39:44.776 Thread[0] httpGet(http://tile.openstreetmap.org:80/11/542/760.png)
CURL:OSMQueue(0):2021-10-12T02:39:44.776 CURL fetching http://tile.openstreetmap.org:80/11/542/760.png
CURL:OSMQueue(5):2021-10-12T02:39:44.855 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/757.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.856 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.858 httpGetURL(http://tile.openstreetmap.org:80/11/542/757.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.863 httpGet(http://tile.openstreetmap.org:80/11/542/757.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:2 Total:138 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.865 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 757
OSM:OSMQueue(5):2021-10-12T02:39:44.869 Thread[5] httpGet(/11/542/758.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.870 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/758.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.870 CURL fetching http://tile.openstreetmap.org:80/11/542/758.png
CURL:OSMQueue(5):2021-10-12T02:39:44.933 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/758.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.934 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.935 httpGetURL(http://tile.openstreetmap.org:80/11/542/758.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.935 httpGet(http://tile.openstreetmap.org:80/11/542/758.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:1 Total:64 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.936 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 758
OSM:OSMQueue(5):2021-10-12T02:39:44.938 Thread[5] httpGet(/11/542/759.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.939 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/759.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.939 CURL fetching http://tile.openstreetmap.org:80/11/542/759.png
CURL:OSMQueue(5):2021-10-12T02:39:44.996 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/759.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.997 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.997 httpGetURL(http://tile.openstreetmap.org:80/11/542/759.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.998 httpGet(http://tile.openstreetmap.org:80/11/542/759.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:0 Total:58 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.999 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 759
OSM:OSMQueue(5):2021-10-12T02:39:45.018 Thread[5] httpGet(/11/541/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:45.018 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/541/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:45.019 CURL fetching http://tile.openstreetmap.org:80/11/541/757.png
CURL:OSMQueue(5):2021-10-12T02:39:45.078 curl_easy_perform(http://tile.openstreetmap.org:80/11/541/757.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:45.079 error message:
CURL:OSMQueue(5):2021-10-12T02:39:45.079 httpGetURL(http://tile.openstreetmap.org:80/11/541/757.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:45.080 httpGet(http://tile.openstreetmap.org:80/11/541/757.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:0 Total:61 (0 Bytes)
OSM:OSMQueueOSM:WinMain:2021-10-12T02:39:44.599 OSMIsTileSetCompatible:X/Y [45] NeedX NeedY
OSM:OSMQueue(5):2021-10-12T02:39:44.717 Thread[5] httpGet(/11/542/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.718 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.719 CURL fetching http://tile.openstreetmap.org:80/11/542/757.png
OSM:WinMain:2021-10-12T02:39:44.766 OSMGetTileInfo:Growing Cache To 64 (Max 405)
OSM:OSMQueue(0):2021-10-12T02:39:44.775 Thread[0] httpGet(/11/542/760.png) From tile.openstreetmap.org:80
CURL:OSMQueue(0):2021-10-12T02:39:44.776 Thread[0] httpGet(http://tile.openstreetmap.org:80/11/542/760.png)
CURL:OSMQueue(0):2021-10-12T02:39:44.776 CURL fetching http://tile.openstreetmap.org:80/11/542/760.png
OSM:WinMain:2021-10-12T02:39:45.209 OSM(g0):1623x985@11=13/14/0/45L B:0.4(S:0.1) W:0.2 (X/Y [45] NeedX NeedY)
Timer:WinMain:2021-10-12T02:39:45.866 hwndMain:rcPaint(Circle:1623x985) took 1.3sec (previous 1.0sec)
CPU:WinMain:2021-10-12T02:39:45.871 New Thread: 96(OSMQueue(0)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.871 New Thread: 100(OSMQueue(1)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.872 New Thread: 104(OSMQueue(2)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.873 New Thread: 108(OSMQueue(3)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.874 New Thread: 116(OSMQueue(5)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.875 New Thread: 112(OSMQueue(4)) Up: 1sec
Timer:WinMain:2021-10-12T02:39:45.877 hwndMain:Paint(RCs) took 1.3sec (previous 1.0sec)
Timer:WinMain:2021-10-12T02:39:46.837 hwndLog(OSM):DispatchMessage(00040120 WM_TIMER 0000000A 00000000) took 0.1sec (previous 0.1sec)
Port(DW_Local):Port(DW_Local):2021-10-12T02:40:16.207 connect errno 10061
Timer:WinMain:2021-10-12T02:40:24.897 hwndEdit(OSM):DispatchMessage(00010128 WM_NCLBUTTONDOWN 00000007 02850594) took 0.7sec (previous 0.1sec)


Re: Setting up Direwolf on Raspberry Pi 4

Lynn Deffenbaugh
 

That's a different log than you posted before.  Now I need to go figure out what an error 43 means coming back from curl.

CURL:OSMQueue(5):2021-10-12T02:39:44.855 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/757.png) Failed with 43

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 10/11/2021 10:44 PM, Rob Giuliano via groups.io wrote:
I think I am requesting them through port 80
But here is the xml section:

<OSM.Zoom>11</OSM.Zoom>
<OSM.Percent>90</OSM.Percent>
<OSM.MinMBFree>100</OSM.MinMBFree>
<OSM.PurgeDisabled>1</OSM.PurgeDisabled>
<OSM.Name>Original</OSM.Name>
<OSM.Server>tile.openstreetmap.org</OSM.Server>
<OSM.Port>80</OSM.Port>
<OSM.URLPrefix>/</OSM.URLPrefix>
<OSM.UseHTTPS>0</OSM.UseHTTPS>
<OSM.SupportsStatus>0</OSM.SupportsStatus>
<Path>./OSMTiles/</Path>
<OSM.MBTiles></OSM.MBTiles>
<OSM.PurgeEnabled>0</OSM.PurgeEnabled>
<OSM.RetainDays>7</OSM.RetainDays>
<OSM.RetainZoom>8</OSM.RetainZoom>
<OSM.MinServerZoom>0</OSM.MinServerZoom>
<OSM.MaxServerZoom>18</OSM.MaxServerZoom>
<OSM.RevisionHours>0</OSM.RevisionHours>

<!--TileServer[0]-->
<TileServer Name="Original">
<Server>tile.openstreetmap.org</Server>
<Port>80</Port>
<URLPrefix>/</URLPrefix>
<UseHTTPS>0</UseHTTPS>
<SupportsStatus>0</SupportsStatus>
<Path>./OSMTiles/</Path>
<MBTiles></MBTiles>
<PurgeEnabled>0</PurgeEnabled>
<RetainDays>7</RetainDays>
<RetainZoom>8</RetainZoom>
<MinServerZoom>0</MinServerZoom>
<MaxServerZoom>18</MaxServerZoom>
<RevisionHours>0</RevisionHours>
</TileServer>
<!--TileServer[0]-->

Loads just fine and runs, but as soon as I move to an area that I don't have a map for, it locks, then closes.
See log below.

Robert Giuliano
KB8RCO

New log:
OSM:OSMMonitor:2021-10-12T02:38:59.626 GetDiskFreeSpace(OSMTiles/) Gave 8*512=4096
OSM:OSMMonitor:2021-10-12T02:38:59.834 [Original]@00163268 566 Files in 6803911/7991296 Bytes on OSMTiles/
OSM:OSMMonitor:2021-10-12T02:38:59.835  Month:   566   6.49/  7.62MB
OSM:OSMMonitor:2021-10-12T02:38:59.836  Total:   566   6.49/  7.62MB
Config:WinMain:2021-10-12T02:39:12.795 WM_CLOSE Object ending with Cancel
Timer:WinMain:2021-10-12T02:39:12.844 hwndMain:MainWindowProc(0001004E WM_COMMAND 0000CABD 00000000) took 49.3sec (previous 1.0sec)
Port(DW_Local):Port(DW_Local):2021-10-12T02:39:16.114 connect errno 10061
OSM:WinMain:2021-10-12T02:39:44.599 OSMIsTileSetCompatible:X/Y [45] NeedX NeedY
OSM:OSMQueue(5):2021-10-12T02:39:44.717 Thread[5] httpGet(/11/542/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.718 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.719 CURL fetching http://tile.openstreetmap.org:80/11/542/757.png
OSM:WinMain:2021-10-12T02:39:44.766 OSMGetTileInfo:Growing Cache To 64 (Max 405)
OSM:OSMQueue(0):2021-10-12T02:39:44.775 Thread[0] httpGet(/11/542/760.png) From tile.openstreetmap.org:80
CURL:OSMQueue(0):2021-10-12T02:39:44.776 Thread[0] httpGet(http://tile.openstreetmap.org:80/11/542/760.png)
CURL:OSMQueue(0):2021-10-12T02:39:44.776 CURL fetching http://tile.openstreetmap.org:80/11/542/760.png
CURL:OSMQueue(5):2021-10-12T02:39:44.855 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/757.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.856 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.858 httpGetURL(http://tile.openstreetmap.org:80/11/542/757.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.863 httpGet(http://tile.openstreetmap.org:80/11/542/757.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:2 Total:138 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.865 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 757
OSM:OSMQueue(5):2021-10-12T02:39:44.869 Thread[5] httpGet(/11/542/758.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.870 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/758.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.870 CURL fetching http://tile.openstreetmap.org:80/11/542/758.png
CURL:OSMQueue(5):2021-10-12T02:39:44.933 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/758.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.934 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.935 httpGetURL(http://tile.openstreetmap.org:80/11/542/758.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.935 httpGet(http://tile.openstreetmap.org:80/11/542/758.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:1 Total:64 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.936 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 758
OSM:OSMQueue(5):2021-10-12T02:39:44.938 Thread[5] httpGet(/11/542/759.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.939 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/759.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.939 CURL fetching http://tile.openstreetmap.org:80/11/542/759.png
CURL:OSMQueue(5):2021-10-12T02:39:44.996 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/759.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.997 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.997 httpGetURL(http://tile.openstreetmap.org:80/11/542/759.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.998 httpGet(http://tile.openstreetmap.org:80/11/542/759.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:0 Total:58 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.999 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 759
OSM:OSMQueue(5):2021-10-12T02:39:45.018 Thread[5] httpGet(/11/541/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:45.018 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/541/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:45.019 CURL fetching http://tile.openstreetmap.org:80/11/541/757.png
CURL:OSMQueue(5):2021-10-12T02:39:45.078 curl_easy_perform(http://tile.openstreetmap.org:80/11/541/757.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:45.079 error message:
CURL:OSMQueue(5):2021-10-12T02:39:45.079 httpGetURL(http://tile.openstreetmap.org:80/11/541/757.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:45.080 httpGet(http://tile.openstreetmap.org:80/11/541/757.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:0 Total:61 (0 Bytes)
OSM:OSMQueueOSM:WinMain:2021-10-12T02:39:44.599 OSMIsTileSetCompatible:X/Y [45] NeedX NeedY
OSM:OSMQueue(5):2021-10-12T02:39:44.717 Thread[5] httpGet(/11/542/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.718 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.719 CURL fetching http://tile.openstreetmap.org:80/11/542/757.png
OSM:WinMain:2021-10-12T02:39:44.766 OSMGetTileInfo:Growing Cache To 64 (Max 405)
OSM:OSMQueue(0):2021-10-12T02:39:44.775 Thread[0] httpGet(/11/542/760.png) From tile.openstreetmap.org:80
CURL:OSMQueue(0):2021-10-12T02:39:44.776 Thread[0] httpGet(http://tile.openstreetmap.org:80/11/542/760.png)
CURL:OSMQueue(0):2021-10-12T02:39:44.776 CURL fetching http://tile.openstreetmap.org:80/11/542/760.png
OSM:WinMain:2021-10-12T02:39:45.209 OSM(g0):1623x985@11=13/14/0/45L B:0.4(S:0.1) W:0.2 (X/Y [45] NeedX NeedY)
Timer:WinMain:2021-10-12T02:39:45.866 hwndMain:rcPaint(Circle:1623x985) took 1.3sec (previous 1.0sec)
CPU:WinMain:2021-10-12T02:39:45.871 New Thread: 96(OSMQueue(0)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.871 New Thread: 100(OSMQueue(1)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.872 New Thread: 104(OSMQueue(2)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.873 New Thread: 108(OSMQueue(3)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.874 New Thread: 116(OSMQueue(5)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.875 New Thread: 112(OSMQueue(4)) Up: 1sec
Timer:WinMain:2021-10-12T02:39:45.877 hwndMain:Paint(RCs) took 1.3sec (previous 1.0sec)
Timer:WinMain:2021-10-12T02:39:46.837 hwndLog(OSM):DispatchMessage(00040120 WM_TIMER 0000000A 00000000) took 0.1sec (previous 0.1sec)
Port(DW_Local):Port(DW_Local):2021-10-12T02:40:16.207 connect errno 10061
Timer:WinMain:2021-10-12T02:40:24.897 hwndEdit(OSM):DispatchMessage(00010128 WM_NCLBUTTONDOWN 00000007 02850594) took 0.7sec (previous 0.1sec)


Re: Setting up Direwolf on Raspberry Pi 4

Rob Giuliano
 

I think I am requesting them through port 80
But here is the xml section:

<OSM.Zoom>11</OSM.Zoom>
<OSM.Percent>90</OSM.Percent>
<OSM.MinMBFree>100</OSM.MinMBFree>
<OSM.PurgeDisabled>1</OSM.PurgeDisabled>
<OSM.Name>Original</OSM.Name>
<OSM.Server>tile.openstreetmap.org</OSM.Server>
<OSM.Port>80</OSM.Port>
<OSM.URLPrefix>/</OSM.URLPrefix>
<OSM.UseHTTPS>0</OSM.UseHTTPS>
<OSM.SupportsStatus>0</OSM.SupportsStatus>
<Path>./OSMTiles/</Path>
<OSM.MBTiles></OSM.MBTiles>
<OSM.PurgeEnabled>0</OSM.PurgeEnabled>
<OSM.RetainDays>7</OSM.RetainDays>
<OSM.RetainZoom>8</OSM.RetainZoom>
<OSM.MinServerZoom>0</OSM.MinServerZoom>
<OSM.MaxServerZoom>18</OSM.MaxServerZoom>
<OSM.RevisionHours>0</OSM.RevisionHours>

<!--TileServer[0]-->
<TileServer Name="Original">
<Server>tile.openstreetmap.org</Server>
<Port>80</Port>
<URLPrefix>/</URLPrefix>
<UseHTTPS>0</UseHTTPS>
<SupportsStatus>0</SupportsStatus>
<Path>./OSMTiles/</Path>
<MBTiles></MBTiles>
<PurgeEnabled>0</PurgeEnabled>
<RetainDays>7</RetainDays>
<RetainZoom>8</RetainZoom>
<MinServerZoom>0</MinServerZoom>
<MaxServerZoom>18</MaxServerZoom>
<RevisionHours>0</RevisionHours>
</TileServer>
<!--TileServer[0]-->

Loads just fine and runs, but as soon as I move to an area that I don't have a map for, it locks, then closes.
See log below.

Robert Giuliano
KB8RCO

New log:
OSM:OSMMonitor:2021-10-12T02:38:59.626 GetDiskFreeSpace(OSMTiles/) Gave 8*512=4096
OSM:OSMMonitor:2021-10-12T02:38:59.834 [Original]@00163268 566 Files in 6803911/7991296 Bytes on OSMTiles/
OSM:OSMMonitor:2021-10-12T02:38:59.835  Month:   566   6.49/  7.62MB
OSM:OSMMonitor:2021-10-12T02:38:59.836  Total:   566   6.49/  7.62MB
Config:WinMain:2021-10-12T02:39:12.795 WM_CLOSE Object ending with Cancel
Timer:WinMain:2021-10-12T02:39:12.844 hwndMain:MainWindowProc(0001004E WM_COMMAND 0000CABD 00000000) took 49.3sec (previous 1.0sec)
Port(DW_Local):Port(DW_Local):2021-10-12T02:39:16.114 connect errno 10061
OSM:WinMain:2021-10-12T02:39:44.599 OSMIsTileSetCompatible:X/Y [45] NeedX NeedY
OSM:OSMQueue(5):2021-10-12T02:39:44.717 Thread[5] httpGet(/11/542/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.718 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.719 CURL fetching http://tile.openstreetmap.org:80/11/542/757.png
OSM:WinMain:2021-10-12T02:39:44.766 OSMGetTileInfo:Growing Cache To 64 (Max 405)
OSM:OSMQueue(0):2021-10-12T02:39:44.775 Thread[0] httpGet(/11/542/760.png) From tile.openstreetmap.org:80
CURL:OSMQueue(0):2021-10-12T02:39:44.776 Thread[0] httpGet(http://tile.openstreetmap.org:80/11/542/760.png)
CURL:OSMQueue(0):2021-10-12T02:39:44.776 CURL fetching http://tile.openstreetmap.org:80/11/542/760.png
CURL:OSMQueue(5):2021-10-12T02:39:44.855 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/757.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.856 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.858 httpGetURL(http://tile.openstreetmap.org:80/11/542/757.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.863 httpGet(http://tile.openstreetmap.org:80/11/542/757.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:2 Total:138 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.865 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 757
OSM:OSMQueue(5):2021-10-12T02:39:44.869 Thread[5] httpGet(/11/542/758.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.870 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/758.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.870 CURL fetching http://tile.openstreetmap.org:80/11/542/758.png
CURL:OSMQueue(5):2021-10-12T02:39:44.933 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/758.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.934 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.935 httpGetURL(http://tile.openstreetmap.org:80/11/542/758.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.935 httpGet(http://tile.openstreetmap.org:80/11/542/758.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:1 Total:64 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.936 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 758
OSM:OSMQueue(5):2021-10-12T02:39:44.938 Thread[5] httpGet(/11/542/759.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.939 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/759.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.939 CURL fetching http://tile.openstreetmap.org:80/11/542/759.png
CURL:OSMQueue(5):2021-10-12T02:39:44.996 curl_easy_perform(http://tile.openstreetmap.org:80/11/542/759.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:44.997 error message:
CURL:OSMQueue(5):2021-10-12T02:39:44.997 httpGetURL(http://tile.openstreetmap.org:80/11/542/759.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:44.998 httpGet(http://tile.openstreetmap.org:80/11/542/759.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:0 Total:58 (0 Bytes)
OSM:OSMQueue(5):2021-10-12T02:39:44.999 OSMCheckAndFetchTileFile:Failed To Fetch zoom 11 @ 542 759
OSM:OSMQueue(5):2021-10-12T02:39:45.018 Thread[5] httpGet(/11/541/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:45.018 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/541/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:45.019 CURL fetching http://tile.openstreetmap.org:80/11/541/757.png
CURL:OSMQueue(5):2021-10-12T02:39:45.078 curl_easy_perform(http://tile.openstreetmap.org:80/11/541/757.png) Failed with 43
CURL:OSMQueue(5):2021-10-12T02:39:45.079 error message:
CURL:OSMQueue(5):2021-10-12T02:39:45.079 httpGetURL(http://tile.openstreetmap.org:80/11/541/757.png) returned -858993460
CURL:OSMQueue(5):2021-10-12T02:39:45.080 httpGet(http://tile.openstreetmap.org:80/11/541/757.png) RspCode: -858993460 Name:-9223372036854775808 Conn:0 Send:-9223372036854775808 Recv:0 File:0 Total:61 (0 Bytes)
OSM:OSMQueueOSM:WinMain:2021-10-12T02:39:44.599 OSMIsTileSetCompatible:X/Y [45] NeedX NeedY
OSM:OSMQueue(5):2021-10-12T02:39:44.717 Thread[5] httpGet(/11/542/757.png) From tile.openstreetmap.org:80
CURL:OSMQueue(5):2021-10-12T02:39:44.718 Thread[5] httpGet(http://tile.openstreetmap.org:80/11/542/757.png)
CURL:OSMQueue(5):2021-10-12T02:39:44.719 CURL fetching http://tile.openstreetmap.org:80/11/542/757.png
OSM:WinMain:2021-10-12T02:39:44.766 OSMGetTileInfo:Growing Cache To 64 (Max 405)
OSM:OSMQueue(0):2021-10-12T02:39:44.775 Thread[0] httpGet(/11/542/760.png) From tile.openstreetmap.org:80
CURL:OSMQueue(0):2021-10-12T02:39:44.776 Thread[0] httpGet(http://tile.openstreetmap.org:80/11/542/760.png)
CURL:OSMQueue(0):2021-10-12T02:39:44.776 CURL fetching http://tile.openstreetmap.org:80/11/542/760.png
OSM:WinMain:2021-10-12T02:39:45.209 OSM(g0):1623x985@11=13/14/0/45L B:0.4(S:0.1) W:0.2 (X/Y [45] NeedX NeedY)
Timer:WinMain:2021-10-12T02:39:45.866 hwndMain:rcPaint(Circle:1623x985) took 1.3sec (previous 1.0sec)
CPU:WinMain:2021-10-12T02:39:45.871 New Thread: 96(OSMQueue(0)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.871 New Thread: 100(OSMQueue(1)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.872 New Thread: 104(OSMQueue(2)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.873 New Thread: 108(OSMQueue(3)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.874 New Thread: 116(OSMQueue(5)) Up: 1sec
CPU:WinMain:2021-10-12T02:39:45.875 New Thread: 112(OSMQueue(4)) Up: 1sec
Timer:WinMain:2021-10-12T02:39:45.877 hwndMain:Paint(RCs) took 1.3sec (previous 1.0sec)
Timer:WinMain:2021-10-12T02:39:46.837 hwndLog(OSM):DispatchMessage(00040120 WM_TIMER 0000000A 00000000) took 0.1sec (previous 0.1sec)
Port(DW_Local):Port(DW_Local):2021-10-12T02:40:16.207 connect errno 10061
Timer:WinMain:2021-10-12T02:40:24.897 hwndEdit(OSM):DispatchMessage(00010128 WM_NCLBUTTONDOWN 00000007 02850594) took 0.7sec (previous 0.1sec)

221 - 240 of 35881