From https://aprs.fi/doc/guide/aprsfi-info-pages.html Read through that quote and I suspect that most of the packets you're copying are either a) injecting directly to the

I saw folks on the forum on the APRSIS website complain about this last year but I saw no resolution, by the way. Whatever they did/didn't do, I did.

Hi, although my raw packets are being reported by APRS.FI, and that I'm active, positions and stations that have clearly been decoded on my RF port are suddenly not being shown under "Stations heard

My bad that I didn't post it here. It's all on me, sorry man! It was more or less not entering KISS mode correctly 'cause you have to cycle power on the SCS tracker after exiting the program in

So it would only work on RF received packets going to APRSIS32 from an 'AGW device' like AGWpe, Direwolf, etc. I have only used it with Direwolf and only on very limited occasions. It did provide an

Hi Rob and thanks for reply, Yes I also use AGW PE on HF for ROBUST PACKET and UZ7HO Soundmodem for AX25 PACKET so at least I can see the heardlist this way. On VHF though I use an APRS Voyager VHF

The AGW port on APRSIS32 is the wrong direction. It receives from RF and only transmits what it wants to go back out over RF. I suspect AGWmonitor only works when connected to an

I often use Direwolf with APRSIS32 (typically with KISS over TCP/IP). When I feel I need it, I use AGWmonitor to connect to the AGW port of Direwolf and it provides an mheard list. This method will

View / None followed by View / RF / All. Or what I use on my IGate is Configure / Scroller / Show IGate/Digi along with No Internals and RF Only.  That way the packet scroller on the left side shows

Hi Lynn and all, Is there a Heard List in APRSIS32 so that if we select it we can see which callsigns were heard on RF directly or via a DIGIpeater or via an IGATE? -- 73 de Demetre

First, digipeating is RF to RF and based on the path. IGating has to do with IS and RF. APRSIS32, in development mode only, supports filtered gating of packets from the APRS-IS to RF

Howdy gang, In APRSIS32 is there a way to select a callsing with suffix (K7MT-63 for example) from internet to my VHF Igate K7MT ??? I have K7MT-8, K7MT-63, and K7MT-11 HF on 10 meters and would like

Examine this download page for PP and note the dates for bug fixes, last one done this past December. https://pinpointaprs.com/download.html 73, Glenn-KF0ED

Never heard of that client before… …DOUG KD4MOJ

I remember seeing a post somewhere on PinPoint APRS and it said PinPoint is a labor of love by Frank Watervoort AB0WV. Feel free to send email to ab0wv@.... Did you try that email? Robert

Does anyone know where the PinPoint APRS author can be reached? I suspect that package doesn't properly support Reply-Acks in APRS messages. http://www.aprs.org/aprs11/replyacks.txt

Todd sorry a bout that excessive verbiage on my part. Mea culpa. It will settle down now as it's fixed. I worked on it for well over a man-week with no progress so I was frustrated.

Oh I've copied packets now... hah hah! All good Lynn!

Well it DID say you SHOULD power off and power back on the SCS tracker. I read it, and disregarded it And I didn't know WHAT a back packet looked like in the logging file . Lynn honed in on it

Sorry, I missed that....probably because busy processing the rash of passcode requests we have had lately! 73 Steve, KF6WAX