Hi Mike, Cool! I am interested in this! I didn't realize (or don't remember) this is possible. "I have a Raspberry Pi 4, I recently installed Wine and was able to run APRSIS32 - Mike K6MFW" I will

True, or any Linux forum. The answer is most likely group permissions. Any installation of Linux with amateur radio should add the key users to the following groups (many may already be setup by

Direct to the post and link: https://groups.io/g/direwolf/message/5584

Yes, join the Direwolf group! https://groups.io/g/direwolf In the meantime: On the RPi, type "aplay -l" This will tell you the card assigned to the Signalink. I recently had a thread about card

This question would better be asked in the Direwolf support forum. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

I have a Raspberry Pi 4, I recently installed Wine and was able to run APRSIS32 (I was able to copy OSMTiles folder from my PC and APRSIS32 runs great, but no connection to radio). I am using

Thanks for catching that Rob, I forgot about doing that. All of my maps area already fetched for that event area and I forgot all about it. Adam KC2ANT

An internet connection is not required for APRSIS32. However, maps are downloaded through an internet connection so you will need to cache (prefetch) the area you will be traveling through before you

if you look at aprs.fi and search for kc2ant-9 on Sept 11th and find the track from 6am until about 2pm that is all a D710AG being paired with APRSIS32 on a Win10 laptop. I had it hooked up to an

Anyone have the sw running with the kw 710ga? My ? Is when conneted to the 710 control head the data it dumps to my tablet will be received packets via rf? No internet required? 73, ke4pmp

http://aprsisce.wikidot.com/downloads Please look around the rest of the site as well Adam KC2ANT

thank you rodney lamay ki6pxv

Hi Facundo, On my system transmitted packets are red and received black Your transmitted packet was digipeated so system is working correctly. You should see that the time in first line has a T

That was my first thought as well, but your PHG also is not completely populated. You either need to select appropriate options or remove it from your beacon text. Lynn (D) -

I'd check the UZ7HO docs before making an assumption. I don't have quick access to them, but ... Possible it is not an error, but RED is TX, and black is received.

Been setting up APRSIS32 with the Soundmodem by UZ7HO and Every time the station beacons, the soundmodem main window shows the following messages, with the first two lines in red and the second two

Thank you, Lynn. So how do I get the bulletin drop down to populate with bulletin groups I wish to communicate with? Craig/KH6CP

Bulletins have nothing to do with ANSRVR. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Intel I7 APRSIS32 2020/05/01 21:21 I've joined a previously existing group and tried to send a bulletin to it clicked ENABLE, chose the A dropdown, but the group dropdown was greyed out. I unjoined

Answers interspersed below... That is an object shape. I don't know if you received it over RF or if you locally created it. If click on the red plus sign, it should give you a pop-up