You could have just deleted the KD7YZ-1/D710 NickName instead of unchecking the boxes.  There's a Delete button in the lower right corner of that box. Lynn (D) - KJ4ERJ - Author of APRSISCE for

though I may have inadvertantly found the answer. I am NOT sseing any7 more of the popup Follow screens come up. I can now "Transmit", whatever trhat does. I can have the radio actrually xmit the APRS

well, golly, I thought I DID delete it. eve3ry single time I digipeat, I bring up that dang follow(kd7yz-1) window. So, should I look in the kd7yz-1.xml then?

It isn't any "Screen" entry, it's the Nickname.  You need to delete the nickname to eliminate the Follow behavior. If you're trying to edit the XML file instead of using Screen / Labels / Nicknames

well, it's difficult to say if that cured it. And I am sure glad you looked at that xml. I would have never noticed that "Screen" entry. Everytime I digipeat KG4DVE-1, that tracking new-window

(Posting response to the group so that all may benefit) Look under Screen / Labels / NickNames and you should see one called KD7YZ-1.  That nickname has MultiTrack Active selected which means that

and yet I found it. QRX

with hidden files also visible, a search of MY PC doesn't find it I am reluctant to hit "reply to group" button as that xml surely must exist

UNLESS the interface allows multiple users (like AGW or some KISS over TCP/IP). I have used multiple instances of APRSIS32 attached to the same Direwolf instance using this method. Keep in mind the

Please e-mail your APRSIS32.xml file to me at KJ4ERJ @ arrl.net. I'll look inside and see what I can find. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Hello Lynn, thanks response. No nicknames I can find. No "Follow: Close and immediately restart did not stop it. Immediately I start APRSISCE there is a beep and the D710G xmits and the Follow

See if you have a nickname declared for KD7YZ-1 that is causing it to do an automatic Multi-Track. Or just close the unwanted "follow" Multi-Track window and immediately restart APRSIS32.  This will

issues I have had is it seems much more difficult to receive ISS radio signals. Some years ago very easy, a basic j-pole is all I needed. I guess transmitter they replaced few years ago has much less

I am unable to STOP the incessant extra screen shows up everytime I see the local large digi-peater KG4 DVE -1 This all started today when I was ONLY seeing the beacon sent out by my DMR 2m radio

Thank You. Don Poaps New Westminster, BC VA7DGP DATA VA7QU VOICE Winlink: va7qu@... Subject://wl2k ALLSTAR 530780 Hamshack Hotline 5971 Mid-Island Phone Mesh 2210 2232

Configure / Beacon / Path... is where you can change the path. And no, APRSIS32 doesn't support "profiles", but it does support multiple instances. Just put the .EXE into a new empty

Has anyone used this setup for ISS APRS? I have no issues running it locally on 144.390. I have to figure how to change the path to ARISS. Is there a way to have a profile for APRS and one for ARISS?

It seems that when I add a budlist filter to my APRS server configuration that uses a partial callsign and a wild card, APRSIS32 does not recognize any of the matching calls as buddies. We had an

Glad you have sorted it J Min G0JMS

SOLVED. Found a second port I had set up when I first began to learn APRSIS32 that was stealing the GPS signal coming in. I have it working now with a good Internet stream on the left and Green, Red,