Are you absolutely sure you unzipped into a new empty directory and double-clicked the .EXE from within that directory? "Eliminated the zip file" doesn't really tell me anything about

Downloaded the software, eliminated the zip file and double clicked on the .exe file. Should I have added a filter to make it function correctly? It started blinking and flashing with no way to stop

Lynn will likely jump in and clarify as the definitive authority! My understanding is that APRSIS32 will act as an IGate if connected to RF and APRS-IS with valid passcode. The RF-IS and IS-RF are

Hi Robert, XML Tnx for clarifying that. FILTERS I'll look into that wikidot docket. Most importantly, it's good we kind of clarified the filters principle in APRSIS32. I have seen few questions on

I already replied privately to your query to the moderators. Here is the correct link: http://groups.yahoo.com/group/aprsisce And I will be looking into the welcome

In the invite you received there is a button to click on that says, Join this group! Once you have done that it takes you to the groups page on Yahoo Groups website where you will see a purple button

Got the welcome to a group and tried the address. Would not open. Is the welcome email up to date on addresses? Ernie Miles, WB2UJL

XML The XML with a date extension is from the last upgrade. You should also have an EXE file with a date extension (the same date extensions). This is for the case where something doesn't work,

Filters. I had a bit of a 'revelation' this morning. I came across a couple of similar unanswered questions somewhere else on the net. I believe the filters only apply to the RF IS / IS RF traffic and

your answers and other posts very educational and thanks for taking time to post. In other APRSISCE news, last week was our Parachute Mobile Mission 31 and APRSISCE is a major component to track

beyond the map tiles, the only 2 files APRSIS32 uses are the execuatable (APRSIS32.exe) and XML (APRSIS32.XML). There is a "safe file" backup of the xml (APRSIS32-safe.XML), but in theory, it isn't

Hi. I have to admit I haven't read the APRSIS32 manual page by page; headlines plus few paragraphs here and there. Work and family commitments in the last few years have taken a heavy toll on my free

I love those pants!  About the only pants and shorts I wear these days (never was much for jeans). Yes, Docker.Lean more at: https://www.docker.com/what-docker Robert Giuliano KB8RCO To:

Docker?  The only Docker I know of has two legs and pockets...  :) Greg  KO6TH Rob Giuliano kb8rco@... [aprsisce] wrote:

I use a Bluetooth dongle and as luck would have it, VirtualBox has provisions for USB pass-through.I haven't done that in some time though.  Since Docker came around, I stopped using VirtualBox on

Thanks for the reply. I've never messed with filters much, so I'm not sure I have this. If I read the APRS-IS filters wiki-dot page correctly (http://aprsisce.wikidot.com/aprs-is-filters), then in

It does provide frequencies! You may be able to load 3.5 as well assuming it is available. Best regards, Fred N7FMH

Yikes, I haven't used Orbitron in years. Did it have a real-time Doppler display? I just found out that I need to take the Netbook to FD after all. It has Winlink Express loaded (lots

Orbitron is still available. TLEs have to downloaded manually since it can’t download from https. There is also a TLE Retriever 3 on the Celestrak site that will get the TLEs automatically.

Hi Fred, I'm tuning it manually; I just wanted gpredict to tell me in realtime what frequency to tune to, but couldn't get it to do that without something to talk to. On Linux, I'm