Ok, that helps a lot. (And thank you for not taking offense in my s!) In Configure / General / Add Filter you can add the string b/W6LMJ* which will cause all packets from

I do not have the Wikilink to hand that shows the step by step set up of APRSIS, that would probably be more help than back and forth emails all day long? Would someone care to post it and state

The local ham radio associations that meet locally have no interest in HF. I ate lunch with a group and after several weeks I was eating at a table by myself. Before we moved from the Binghamton NY

Yes I have the internet. I used this years ago with great success. I moved and zoomed to get the street here in Durham NC I went into GOOGLE and found it with some difficulty but got my pass code

Did someone steal your 2m transceiver? Or did it blow up due to mismatched SWR? Did you sell it? I have no idea what you mean by the statement. Are you doing a

Opened correctly and zoomed to locate to my home address. No longer have 2M transceiver. Next step please. Ernie

I have deleted the zip file and moved the exe from the same folder to another folder. Will see if I can download again and do the steps correctly. Ernie

Three questions: 1. Do you have internet (assumed yes if you downloaded the file), but it doesn't necessarily mean you have the proper access. From work I can download the file, but it won't

Are you absolutely sure you unzipped into a new empty directory and double-clicked the .EXE from within that directory? "Eliminated the zip file" doesn't really tell me anything about

Downloaded the software, eliminated the zip file and double clicked on the .exe file. Should I have added a filter to make it function correctly? It started blinking and flashing with no way to stop

Lynn will likely jump in and clarify as the definitive authority! My understanding is that APRSIS32 will act as an IGate if connected to RF and APRS-IS with valid passcode. The RF-IS and IS-RF are

Hi Robert, XML Tnx for clarifying that. FILTERS I'll look into that wikidot docket. Most importantly, it's good we kind of clarified the filters principle in APRSIS32. I have seen few questions on

I already replied privately to your query to the moderators. Here is the correct link: http://groups.yahoo.com/group/aprsisce And I will be looking into the welcome

In the invite you received there is a button to click on that says, Join this group! Once you have done that it takes you to the groups page on Yahoo Groups website where you will see a purple button

Got the welcome to a group and tried the address. Would not open. Is the welcome email up to date on addresses? Ernie Miles, WB2UJL

XML The XML with a date extension is from the last upgrade. You should also have an EXE file with a date extension (the same date extensions). This is for the case where something doesn't work,

Filters. I had a bit of a 'revelation' this morning. I came across a couple of similar unanswered questions somewhere else on the net. I believe the filters only apply to the RF IS / IS RF traffic and

your answers and other posts very educational and thanks for taking time to post. In other APRSISCE news, last week was our Parachute Mobile Mission 31 and APRSISCE is a major component to track

beyond the map tiles, the only 2 files APRSIS32 uses are the execuatable (APRSIS32.exe) and XML (APRSIS32.XML). There is a "safe file" backup of the xml (APRSIS32-safe.XML), but in theory, it isn't

Hi. I have to admit I haven't read the APRSIS32 manual page by page; headlines plus few paragraphs here and there. Work and family commitments in the last few years have taken a heavy toll on my free