I see there is UIFlood info there now, thanks. Carl Sent from my iPod

I am trying to get weather alerts setup. I followed the Wiki instructions: firenet setup, shape files downloaded and add / active, and weather office (HGX) added. If I do a "showme" I get

Hi Lynn, For consideration for your queue when you get back all rested from your trip, and itching to get back into coding... One thing that has bugged me about objects, and NWS objects in

Lynn and all the rest, Thanks for the help, I got the UIFLOOD and WIDE both working with APRSIS32 on the KPC-3+. Great program Lynn! Carl,KB1EJH

On 3, that is what I was trying to get at. The others are online and going. We are just trying to maximize the utility of the system without overloading it. Carl Sent from my iPod

I have been doing a wiki update, others do that to, but ifit’s wrong it’s probably my fault. Have a look and let me know what you think Steve Daniels G6UIM

Item 3: Thanks! Best regards, Fred From: aprsisce@...[mailto:aprsisce@...] On Behalf Of James Ewen Sent:Wednesday, May 25, 2011 18:04 To:aprsisce@... Subject: Re: [aprsisce] Re:

Oh so many things to comment on... 1) No I do not have SSn-N digipeating working on my copy of APRSISCE/32, because APRSISCE/32 does not support proper SSn-N digipeating that I know of. It only does

<kj4erj@...> wrote: Sure it does, pull down the map selection, and click on terrain... hypsography information is now present. James VE6SRV

Ok. Just curious. If you only have four that will support it,then 5 or more isn't needed but not a big deal since there is no other stationsthat can deal with it. I think WB4APR had certain

Why 7? I don't know that is what APR Bob had before on one of the web pages. We have three soon to be 4 in the Southern part of the state that are set up for SSn-N. It keeps the packets local so

For your setting of DEn-N to work, you will need many digisset to the same thing, not just yours. Your station hearing the beacon willdigipeat it once to the next digipeater. The reason WIDEn-N

Ahh, it may not transmit but the Kenwood digi was off and for some reason the red LED came on and the position/station showed up on the Yaesu VX-8R.....hmmm I will try it with the KAM like it is

Checked the 6-5 line and it was good, must have been a cut and paste hic-cup. Carl

"DigiPeating Not Supported on KWD710(APRS) Protocol Ports" means exactly what it says. Digipeating is NOT supported on the custom Kenwood protocol ports because those protocols use the UNPROTO

I would get one original digipeat and then nothing, then change location after some time and get one digipeat then nothing. Now all I get is.... WinMain:2011-05-25T20:54:15.890 Digipeating KB1EJH-8

Thankfully, no rain today as my son and I were out for 5 hour hike. Look at where KJ4ERJ-12 is and considering hiking to SntJeroni on aprs.fi. That won't show the 1,600 foot altitude change

Thanks for the proofing on the DE6-5 line, I was going blind trying to do that... I think I found the problem as digipeating is not supported in the D710/Kenwoods yet according to the log. I will try

Wait, you mean that it only digipeats ONCE per program activation? Or only once for a specific packet within a specific time period? If you're forcing beacons out of your radio and nothing has

If it digi’s once then I think youmight have another issue, as if it hits the digiXform and gets translated thereis no reason it should not do it the second time. I wonder if the act oftransmitting