All MFJ TNCs? I have an MF 1278T, and it's definitely stuck in KISS mode. Simply power cycling it does not result in the Cmd: prompt returning. I needed to close down APRSIS32 in some orderly

On Mon, May 16, 2011 at 7:53 AM, czajkaej <czajkaej@...> wrote: Sorry for the delayed response, our local ARES unit is currently deployed in support of an emergency evacuation for the town of

would be a help from someone with more knowledge than me because im new to this aprs

I will be running my APRSIS on the trip to Dayton. I will belooking for other travelers and hope to catch up with them on 2 meters voice Rich

I don't know if this will help, but consider adding MapQuest Aerial maps. They won't help give you bolder maps, but you can't beat the detail. They are aerial photos of the US, but don't include any

It would be very useful if someone who has actually set up the D72A with APRSIS32 to act as an iGate/Digipeater would create a document to indicate exactly how to set this up: both the D72A menu

On 5/16/2011 4:51 PM, kc8sfq@... wrote: Not exactly. I suspect you're referring to the Quiet Time setting on the Port configuration page. This will probably not help you, but you can

N8DEU, Tim and WF5X Randy: Thanks for the replies. I justtalked to MFJ on the phone. (Before I opened my e-mail) They confirmedthat I need a different EEPROM (or re-flash). I was impressedthat they

I'll work on that streamlined document tonight. There's a bit better way to post DF objects than what you posted, but I'm training a bunch of new employees currently. James VE6SRV

On 5/16/2011 3:38 PM, Rud Merriam wrote: > Next question is how to communicate between two instances without going through the internet to the main servers. What I am after here is running

On 5/16/2011 3:38 PM, Rud Merriam wrote:

Read this: http://aprsisce.wikidot.com/tile-sets The tile server data for MidnightCommand and RedAlert has beenchanged to allow for better band width I think. There a re now four servers,

JKISS is a KISS only EPROM image from G8BPQ version 4.08 that has been around for at least 20 years that will convert an MFJ or any TNC2 clone into a KISS only system. We used this on a BBS system in

Thanks, James, Next question is how to communicate between two instances without going through the internet to the main servers. What I am after here is running one

unfortunately, no. when we ran mfj tncs for the bbs that needed the mfj to be in kiss mode, we had to replace the eeprom with a kiss only one, that was aftermarket and i have no idea where to get them

If you're office employs a web filter, it's likely being blocked because most filters will see the url (behind the tinyurl) as a proxy server, which are generally blocked. The direct link to

HiLynn, I have the Tilt and T2-301 workingtogether using Bluetooth now. I am sure you are not surprised. Statusis "TilT2-301".Iput together a quickie test harness last Friday and ran it on the way

Yes, that is all correct. Yes, that is also true. I did something similar while testing the low powered AIO-4 using the T2-135 in my van to be the digipeater to boost it out to the network at large.

On 5/16/2011 12:29 PM, kc8sfq@... wrote: I had what I needed to see right here. At 15:45:12 UTC, your TNC rebooted itself and dropped out of KISS mode. It was working fine until out of the blue

Greetings, I am looking to do a mobile digipeater. But, before anyone's skivvies get knotted in a bunch... ;) It may really be called pre-emptive digipeating or something like that. I have a