Can you fill us in on the resolution so that others that may have the same problem won't have to go through so many questions to get to the answer? Lynn (D) - KJ4ERJ - Author of

First off, you have to be within range of a D-star repeater or hotspot. DPRS doesn’t work the same as APRS. As long as you’re at within range of a D-star repeater, is all in the settings of the

Thanks Sir, the problem has been resolved thanks to your questions and direction.

[INT] is an "INTernal" transmission used to propagate information strictly inside APRSISCE/32. [IS+RF] is a packet that would like to be transmitted on both APRS-IS and RF ports, but

I'm not sure I know what an "ID51A GPS" is? But I suspect it has to do with D-Star and not APRS... Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Please define [INT] and [IS+RF] provided in Trace(Transmit) log

What makes you think the RF is being transmitted by a computer program? And how would you think said RF would get to an antenna? APRSISCE/32 runs on the PC and sends a packet via RS-232

We are attempting to have all of our team members activate their ID51A GPS and then be able to track them on the map. As yet we cannot get the position reports to show up on the map, we have tried

Ok, well done ✅ You have provided information I needed for self identification of my mistake. How much do I owe you?

These are a few things that would prevent transmission: 1. TNC interface mode APRS clients work best when the TNC is in KISS mode. If the clent expects KISS, but the TNC is not in KISS no

Ok, so the rf is being tx by APRSISCE saving my tnc/trncvr for what?

Read http://aprsisce.wikidot.com/doc:transmitting and check what all it says there. As well as viewing and enabling both the Transmit trace log and Port(<YourPortName>). And we

When I hit transmit my callsign pops up in the vertical log but nothing happens with the tnc and it's radio. No rf.

When APRSISCE/32 transmits, of course! Open and enable the Transmit trace log and then hit the Transmit menu option. Maybe also read: http://aprsisce.wikidot.com/doc:transmitting

When should I see transmission indication on my tnc and txcvr while on APRSISCE?

With a cable from these guys, https://hammadeparts.com/shop-for-cables/ols/categories/amateur-radio-tnc-cables Or build your own. Kevin From: <APRSISCE@groups.io> on behalf of

How to connect my KPC-3 to my Kenwood TM-V71.

I want to join the APRSISCE GROUP

Thank you Sir!

The easiest way to interface with a KPC-3+ is to lock it into KISS mode via a terminal emulator and use a Simply(KISS) type port in APRSISCE/32. Do NOT use a KISS port type or APRSISCE/32