Very good Lynn. I’ll keep a WX eye out!! Glenn

Thank you for noticing that and letting me know. One of the 3 translations of firenet.us (173.255.218.98) is not accepting connections and of course, that's the one the lightning injector

I've got files for the PK-900. Should be similar enough. Let me know. Glenn-KF0ED

I see no lightning feed(s) any longer? Glenn-KF0ED

Thanks Arte ! That got me going !!! Its been a while since I used the pk-232. Thanks, Joel

The following is from pages 27-28 of "TECHNICAL REFERENCE MANUAL MODEL PK-232 DATA CONTROLLER" 4.7.1 Starting "KISS" TNC Operation Before entering the KISS mode, set the PK-232 for hardware flow

Hello all, Anyone have a copy of their APRSIS32.xml to share. Wanted to look at the pk232 startup lines. Its been a while since I used my pk232. Thanks, Joel

Thank you Ian!

Greg, I right clicked on Fequency Monitor, Schazam, it was gone. Thanks, Burt, AF5AA. Sent from my Galaxy

This is interesting. I have frequency monitor enabled but nothing ever pops up.

Just be aware that when upgrading cumulus you have manually edit the config file so that it generates wxnow.txt file. It’s easy to do but it’s just a pain.

I just recently setup a Davis Vantage Vue and could not for the life of me get it to play nice with APRS. I finally downloaded Cumulus and now it generates the wxnow.txt file I need and also directly

Use the 'Wayback Machine' (Internet archive). On this archived page https://web.archive.org/web/20180412203927/http://www.bpsmicro.com/Files/WXNOW_Generator.htm is a link to an archived copy of it,

APRSISCE/32 by default is noisy… it likes to tell everyone all about itself. It still makes noise in the log even if telemetry isn’t going out anywhere. You can turn off telemetry if you don’t

Int means internal. And T# is telemetry sequences. KB3KBR Greg. Sent from my Samsung Galaxy smartphone.

Hi All Sorry for the noob question But what are these? (one's in bold) They seem to be transmitting every minute. I thought they were beacons but they aren't. Looking at the log it says Transmit (INT)

For the frequency monitor it has to be visible the go back into enables and unchecked it. Or while it is up right click on it and uncheck enabled. KB3KBR Greg. Sent from my Samsung Galaxy smartphone.

I have done a video about using Robust Packet with winRPR software soundcard modem and APRSIS32. No need to buy a TNC anymore! APRSIS32 works great with

I just tested the GPS setup, and the ports appear to be "or'ed". I was able to connect through method 2, even with method 1 configured but no device attached. Then I switched. I was able to

These 2 methods of connecting of connecting a GPS to APRSIS32 are very different. Let's start with the 'stand alone' GPS: 1. This connection is made with a NMEA port type Menu >Configure >Ports