Julian, ToCalls are typically issued to the device or software that is actually implementing the protocol and generating the APRS packets. Is your request for the SCS PTC modem that

Hi. I am sorry to post this topic here cause it is not related to APRSIS32 software (well, I guess, unless an SCS modem is used in KISS mode with APRSIS32). I hope group moderators/owners do not mind.

Got my password and I’m set up. Thank you to all 73s Mark W3EJE

Instructions for APRSIS32 and passcodes are clear on the WIKI: http://aprsisce.wikidot.com/doc:passcode The intent of this passcode process is also clear: It is the responsibility of each software

Passcode sent off list. Robert Giuliano KB8RCO

Hi Mark Put your call sign (without anything else) in here and you will get an APRS code for all of APRS operation…. https://apps.magicbug.co.uk/passcode/index.php/passcode G0JMS Min.

My name is Mark Ferris W3EJE and recently joined the group Downloaded APRSIS32 and I am on this screen Reading instructions on the web states that you need to ask for a password - that

Also, you might want to have just one of the devices sending packets as W5GIF. You have APRSISCE/32 sending packets. 2021-03-16 08:18:02 MDT:

> I assume HAMBRG is a local digi or other RF station? https://aprs.fi/info/a/HAMBRG From that page there's info to help us out... W5GIF HAMBURG AR. Let's find out who W5GIF is that is in control of

Is HAMBRG running APRSIS32? If so, the callsign that is sent to APRS-IS along with a matching passcode is the one in from >Menu >Configure >General >Client Configuration >MyCall which appears to be

Yaesu's fill up then drop off the oldest. I've never been able to produce a rej from one. KB3KBR Greg. Sent from my Samsung Galaxy smartphone.

Moved to the general list. Bill. I asume HAMBRG is a local digi or other RF station? If so, the passcode isn't going to help HAMBRG hearing (seeing) you. The passcode allows APRSIS32 to directly

The Kenwood APRS radios (not sure about Yaesus) have a maximum number of messages they will hold in their message list. If that list is too full when a new message is received, it will be

Can I try from india I do have tmd710 with me but I don't know how to do setup Vi2RK

Your message target station, KB0NWT is likely a Kenwood radio that has a full emssage buffer which is why your message to him/her was rejected. Lynn (D) - KJ4ERJ - Author of

WinMain:2021-03-15T19:15:44.377 New Chat(KF0ED<>KB0NWT) hwnd(000C087E) Error(0) WinMain:2021-03-15T19:16:31.970 To(KB0NWT) Msg(If u have a chance, upon a 2m band opening, try our .225 rptr.)

If you are referring to APRSIS32 acting as the DIGI, you can open the logs for Digi and Digi(NOT). Any activity that APRSIS32 'hears' and expects to act on will be logged in either of these logs.

Which program are you trying to observe working as a digi with APRSISCE/32? To know if this other program is working on RF, you should have APRSISCE/32 setup with an RF interface. When the program you

Hi all, I just wanted to know how I can see that the program is working correctly as a Digi via the APRSIS32 program.

In a recent project, I sent new EQNS packets and eventually got it right. Each time it was sent, they were updated. Now they are there until I change or delete. Fred N7FMH