I saw this in Massachusetts. Is it helpful? Best regards, Fred N7FMH

Is there any APRSIS32 user operating an RF station near the CLAYTN digipeater in New Jersey (https://aprs.fi/#!call=CLAYTN)? I received a report from KD2EIB that he is seeing my LS-* lightning strike

Old eyes and fat fingers. 73 Thank you Don va7dgp/va7qu

Look closely at your second attempt. You had gmail <comma> com, not gmail <dot> com. I just sent a second test to your @winlink.org e-mail address. It may be that winlink is blocking

Weird. I realize my typo in the first attempt. Corrected email address. I tried yours went through. I then tried a fellow ham and it went through. Not sure why my original 2 attempts crashed with the

I did your steps but used a ISP email. Not a Winlink email. 73 Don Poaps New Westminster, BC VA7DGP DATA VA7QU VOICE Winlink: va7qu@... Subject://wl2k

According to what I see in your raw packets at aprs.fi, you didn't use a properly formed e-mail address: The first attempt was simply "@gmail" which is invalid. The second

Can you tell me the steps you took to get that error? I just sent a test e-mail from my APRSIS32 (KJ4ERJ-AP) to you via EMAIL-2 and it worked as designed. Messages / Send EMail...

6:52:30 New Chat Between EMAIL-2 and VA7DGP on 2020-06-03 06:52:0 Invalid Request! http://www.aprs-is.net/Email.aspx I imagine that info on this web page is hardcoded in APRSIS. I know wlnk-1

Wow, what a difference a software upgrade makes! My tile server (http://ldeffenb.dnsalias.net:14171/hot/%z/%x/%y.png) has been struggling recently to keep up with the OSM planet-wide

Follow-up. If I click on a station on the map, then click on the Callsign to get more information, that also plays the MB_ICONINFORMATION sound. Arnold Harding

Lynn, Is there any way we can set Stations.MinAge and Stations.MaxAge other than by editing the .xml file? Can you consider adding that possibly in Configure ->

Thanks Jerry! Done! -- 73 Bob KD7YZ AMSAT LM #901 -- KD7YZ Bob EM88LL

Turn off purging in the map options to keep the tiles you have already downloaded. No need to download the same tiles over and over again, especially if you have poor internet service. James

Hi Lynn and all: Internet "may" be the issue. sometimes I either have "some slooowww" Internet and sometimes no internet. Sometime up to a whopping 20mb. Map OK now. OSM was turned on. tracing was

Yes, there should be an APRSIS32.XML file in the directory under which you execute the program.  Deleting that file while the program is closed will put it back to its original non-configured

One more thing that Mark sparked: And, not running from the ZIP file. Fred N7FMH

I will add a couple of other basic things to Fred's checklist: Be sure the APRSIS32.exe file and the map tiles are not in Windows protected folders PROGRAMS and PROGRAMS(x86). Either of those will

Look at Toolbar-Enables: Are you connected to the internet? Do you have internet Access enabled? Is OSM fetch enabled? This will take a bit more effort if everything above is answered yes. Have you

A while back I answered my own question about this. Apparently that wasn't the answer. When I started APRSIS32 this AM I saw the pixelated map again. Thus I did another reboot. This did not fix the