For the record, there is no charge for APRSISCE/32 and no "funds" required for registration. I believe (hope) that Vince was referring to some other program that requires "funds for

Error 5 opening a COM port is usually due to the fact that you have some other program running that "owns" that port.   Make sure you've closed all other programs that are accessing COM4, presuming

I am "still" trying to get my new D710GA to function in the APRIS32 environment (having read all the suggested pages) ------------------------------------- I enabled, then began reading trace logs

Resolved and closed. Wrong software author. But I can say this. A nice piece of software and thinking of using this software full time. 73 Vince KD7TWW

Hello all! This has been resolved and closed now. Thanks too all for the attention to this request! Wrong software author and program had to do really about nothing. I am thinking of registering this

anyone know of a setting or other software i can run on at my home station that can grab the aprs voice repeater beacon packets and let me press a button to load it into the radio ( a kenwood 2000 )

@Michael Heskett WB5QLD It might be! Maybe I am seeing things again?! LOL When it comes up again I'll grab a screenshot and post! LOL TY 73 Vince: ":>) KD7TWW Formerly KJ7EUG Thank you for your

@Robert KB8RCO When it comes up again I'll def take a screen shot! 73 - In the movie Contact, what was Ellie's callsign? 73 Vince: ":>) KD7TWW Formerly KJ7EUG Thank you for your reply...

APRS.FI requires a logon to do some things like look at raw packets. Could that be what Vince, KD7TWW, is seeing? Michael Heskett WB5QLD From: aprsisce@... Sent: Wednesday, September 18, 2019

APRSIS32 has no such screen or place to enter. When does that come up? If you can grab a screen shot, that would help. Robert Giuliano KB8RCO

Eric No, That is okay and entered. It's the login ________ password_________ I am asking for and about. I'll have to dig again and look for it and take a screenshot Vince KD7TWW 73

When the pop-up is showing, uncheck Enables, Frequency Monitor. Or when the pop-up is showing, right-click on its border and un-check "Enabled".

> Every so often a request from a Freq monitor pops up and makes a ding sound. How do I stop the behavior? When the pop-up is showing, uncheck Enables, Frequency Monitor. Or when the pop-up is

Hi Vince, What it's probably asking for is your APRS-IS passcode. This is what authenticates you to the IS servers to allow your packets on the internet side. There are directions for each program on

Hello Group Every so often a request from a Freq monitor pops up and makes a ding sound. How do I stop the behavior? Vince 73

Hello my Name is Vince KD7TWW Somewhere in the APRS ISCE software, it's asking me to contact someone for a Login and password for added or other features. I come across this every so often when I go

And remember to edit the APRSIS32.XML to re-enable development mode and then use About to download the latest version if that's what you're after. Lynn (D) - KJ4ERJ - Author of

http://aprsisce.wikidot.com/downloads

My computer recently crashed and I lost APRSIS/32. I have a passcode so all I need is the address to redownload. Thanks; Burt AF5AA

Was proportional pathing ever implemented within APRSIS32? Seems to be the perfect setup for most mobile hams, especially while off road and whatnot. It would be even more awesome if one could