Carmine, what is the event you are working? Chris Sent from Mail for Windows 10

It was Dead Reckoning. Thank you for the help. Carmine Prestia, K3CWP ---In aprsisce@..., <goatherder_4891@...> wrote : If I'm thinking what you're saying, try Screen> uncheck Dead Reckoning.

The development version tends to be stable, especially recently. For instructions on how to switch to it, see the following 2

If I'm thinking what you're saying, try Screen> uncheck Dead Reckoning. Greg KB3KBR Sent from my Verizon, Samsung Galaxy smartphone

I'm using APRSIS32 on a major public service project right now and it insists on showing me a predicted track for my units. I don' need this and want to turn it off but cannot find out how to turn

Hello all reading the doc's, page 136: ---------------------------------- Satellite Operation Control-O (Oscar) opens the world of Satellites. This is only accessible if you use the developement

That is, I was trying to get my setup to take useful Signals off 144.390 or 145.825 and put them into the Internet-Side. I am too new to this to make judgements on the

I would add ... Putting thed infomration on the list does a few other key things: 1. Allows others to provide their experiences and participate or at least move the issue higher on the search

On list is fine with me.  One of my standard sayings is that for every question that is asked, there's likely more than the asker interested in the answer. Lynn (D) - KJ4ERJ - Author of APRSISCE for

Yay Mark, the Elmer again. Perfect. Back to "normal" Were u able to tell if I moved any RF to Internet Side after I made the other changes? Or, is this better off-list so as not to clutter with

CONFIGURATION>SCREEN>ORIENTATION> then click on WIDE, NARROW or AUTOMATIC. In WIDE, the scroller will be about 5 lines long along the left side as you are seeing. In NARROW, the scroller will be a

Whatever I 'configured', made the Scrolling list of stations and such, move from all along the Left-Side to a tiny are of the Upper-Left ... namely, there are 5 lines only. -- 73 Bob KD7YZ AMSAT LM

Ah, nevermind.

The D72 has a map? Tell me more. I have never found it.

Thanks Don. I have it figured out now Set My Position and then turn off the GPS. I am new to aprs in general so still trying to get up to speed with aprsis32 with the D72. Tnx 73. mike

Yes that would be it, thanks.

APRS, My Position ?

APRS, My Position?

I have a D72. I don’t use the GPS settings. I drag the map to where I am. Have you set the tnc for packet12 plus the D side of the band To TX Later Don va7dgp -- Don Poaps New Westminster,

Hello group I am trying to get my D72 working with aprsis32 and have it working okay, the only problem is I am indoors and having trouble getting a GPS lock on the D72, so I can't beacon out. Does