Ok, that trace log shows that a KISS packet was sent to the port asking it to be transmitted. If it didn't transmit, then either your TNC isn't wired to the radio properly or it isn't in KISS

Port(1):2017-03-15T23:33:08.263 Sent[77]:b`d@`b@bd@c<03 F0>@233308h4032.51N/07410.18WlAPRS-IS for Win32 Transmit Log

My call is N2UFM ID...9622 PORT LOG

Enables / Logging / Port() and enable that trace log. Then hit Transmit and see what if anything shows up in the trace log. If nothing shows there, then Enables / Logging / Transmit

Thank you for you help Lynn. I went to that link and I have everything set the correct way. It just seams too me that the program is not sending any commands to the TNCat all.

Hi Marc I am running a FT-847

Please also read: http://aprsisce.wikidot.com/doc:transmitting Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

What radio is it connected to? Mark KE6BB

Hi I am new too APRSIS and I am having trouble getting the program to key my radio. I am using a PK-232 TNC. I have the com port parameters set correctly. It is in KISS MODE. If anyone has had the

Yes thanks Fred, you right there, I have been trying to unsubscribe for about 3 months now and still the emails keep coming in ☹️☹️ Regards Baz g7ufi

Be prepared for more emails though. Yahoo has been slow at removing users from groups they unsubscribe from. If you first change to “digest”, then “unsubscribe”. That seems to be a reasonable

As it says at the bottom of every message, if you can send a message to the group, you can send an e-mail to unsubscribe yourself. No password needed. Lynn (D) - KJ4ERJ - Author

I really need to leave this group. It I no longer remember my password and also can no longer use YAHOO. So you could you please delete me from group asap and no longer send me emails Regards Barrie

There is a lot of information here: http://aprsisce.wikidot.com/port:kenwood-tm-d710 Robert Giuliano KB8RCO

what goes on the internet tends too stay on the internet, my eyes are still on the glass! 88 Steve, KF6WAX

It seems to me that everyone is NOT addressing the elephant in the room and that is amateurs will get frustrated when they do not hear back promptly and will then go looking for a way to work around

Make sense now thanks for the quick reply!! Matthew R. Esposito

The iPhone aprs.fi app does not send the data to any of the APRS servers except aprs.fi. I understand that is a plan, but not yet. Arnold KQ6DI

The aprs.fi iPhone app is just what it says it is, an aprs.fi application. Beacons from it only show up on the aprs.fi but NOT on the APRS-IS proper. You'll only see users of this app on the aprs.fi

I believe I heard that the iPhone app is only integrated with aprs.fi, and doesn't actually forward information to the aprs-is internet system itself (where aprsisce, other applications, and