Don't most cell phones have mike / earphone connections? There is iPaq software called PocketDigi that does digital modes this way. - 73 - Rud

Hi Steve, I don't know if you want to take on another dimension to the table, butthe HP iPAQ hw6945 (which you have listed) will drive an externalserial TNC (including the Kenwood TH-D7) via a serial

Hi Lynn, Lynn W Deffenbaugh (Mr) wrote:HOW, pray tell, would you connect the audio into your phone? Desktop,sure, but phone? All I can picture are the acoustic handset couplersfrom days gone by.

I'm not having success filtering out the stations with the H2O symbol. What's the correct filter? -- Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur

I support adding it as a cut & paste. - 73 - Rud Merriam K5RUD Emergency Coordinator Montgomery County ARES® Mystic Lake

>Argent data will supply a TNC2KISS chip at minimal cost. That willchange it to a kiss only TNC it's a couple of $ plus post. Iwas not aware that Scott could (would) do that. I think, however, I'll

James: I, for one, appreciated that explanation, I had no idea what UIFLOOD was. Thank You KC0WNY, On 5/23/2011 4:55 PM, James Ewen wrote: -- KC0WNY - Ted

I do wonder if this sort of thing shouldbe added to the wiki I know it’s not APRSIS specific but it does getasked, last time was January. In an other stuff section maybe, its now writtenup on here

<kj4erj@...> wrote: UIFLOOD is very similar to UITRACE (which is what APRSISCE/32 does currently). UIFLOOD uses an SSID which is decremented, and it keeps a CRC packet payload log to keep from

I have a TNC2 clone and had no real issues,open/close commands along with quiet time kicked it back into kiss, Argent datawill supply a TNC2KISS chip at minimal cost. That will change it to a kiss

Hi Steve: As you may or may not have noticed from recent discussionshere on the group, The TAPR TNC2 and clones need a different EEPROM to useKISS mode. The IS32 program will put the TNC into KISS,

I have created a new menu system for the WIKI that I hopewill make things easier to find. I hope I have got everything linked in, but will be doublechecking to make sure Steve Daniels G6UIM

If this is a first time install,...See my Axim X51 posts... It might be similar. Search for Axim X51 should also show the other messages in that thread. Brian. Re: Axim X51...? I got APRSISCE

I run it on my MacBook Pro using Wine and it runs and looks great.

I am trying to gather together the compatible hardware andsetups for the wiki on this page http://aprsisce.wikidot.com/compatible-hardware-software if you have hardware not listed and the setup

It’s not tomorrow it’s today.Are we allowing humour on the list? Just don’t read what I put in theeditor profiles on the wiki Have been creating a menu structure in thewiki, hopefully when

I am seeing the same error. I dismiss it a couple oftimes and life is good again. Disabling the GPS does work to avoid theerror. I tend to leave APRSISCE and the GPS running. I do have an USBport

Steve, since it is tomorrow... I sense an attempt at humor. Best regards, Fred, N7FMH From: aprsisce@...[mailto:aprsisce@...] On Behalf Ofapenadragon Sent: Saturday, May 21, 2011

Hi Lynn, Editing the XML to set GPS to 0 enables a restart on my WinMo 5 iPAQ. Greg KO6TH

Several of us use AGW on Windows 7 and on Windows XP without any problems. I use it on my computer with XP, and on another that is a high level Digi. Is it possible you don't have a very good sound