Date   

Re: Connecting APRSIS32 to APRX or DIXPRS

Rob Giuliano
 

Thanks for the clarification.  I was actually thinking that APRX 'listened' and when APRSIS32 tried to connect, it would do so.  But as usual, you are correct.  Neither does. 

You can connect from APRX to APRSIS32 through as the APRSIS32 local-server.
  I have never looked at whether APRX can have more than 1 APRS-IS server configuration.
  I tried it.  I didn't get an error, but it appears it only connects to the first instance.

The other WRT54 application I was using at the time was 'ldsped' by ON7LDS
It is somewhere between AGW and APRX in that it includes AGW ports for remote connections to TNCs. I think it was a little more difficult to get setup, but that must have been what I used.
I think I read there was a version for the Pi.  I am not sure if it is still in development, but the page was still active.

Robert Giuliano
KB8RCO



On Friday, February 19, 2021, 1:22:29 PM EST, Lynn Deffenbaugh <kj4erj@...> wrote:


APRSISCE/32 does not accept incoming connections from TNCs or other external devices.  APRSISCE/32 expects the device to be listening for an incoming connection that APRSISCE/32 will initiate.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32


On 2/19/2021 12:19 PM, Rob Giuliano via groups.io wrote:
The last time I used APRX was with my WRT54, so it is a bit rusty.

First, you want Simply(KISS) in APRSIS32 because you will not need any <OpenCmd> or <ClosseCmd> commands for this port configuration.
  The other ports (KISS and radio specific) have defined information that is sent to properly initialize the TNC.

Your interface is trying to connect to itself (localhost).
I am pretty sure you want that interface to connect to APRSIS32.

# This port tries to connect to your APRSIS32 application - assumed on another computer.
# I am not sure what APRX will do if that application (port) is not open.  I assume wait for it.
<interface>
      tcp-device   {APRSIS32 IP} 8100    KISS
      callsign     iw2ejh-14
      tx-ok true
</interface>

# This port connects to your TNC2 - assumed already functioning.
<interface>
      serial-device {device settings per APRX manual}
      callsign     iw2ejh-1        {for referencing below, use your current settings}
      {All your related settings for the TNC2 ??}
</interface>

# Send all received packets from TNC2 to APRSIS32
<digipeater>
      transmitter iw2ejh-1
      <source>
            source iw2ejh-14
      </source>
</digipeater>

# Send all received packets (according to the port configuration) from APRSIS32 to TNC2
<digipeater>
      transmitter iw2ejh-14
      <source>
            source iw2ejh-1
      </source>
</digipeater>

I am pretty sure that was how I had it working on my WRT54.  I tried to find copies of my old aprx.conf files from back then, but I am sure they are long gone.


Re: ?APRSP

James Ewen
 

Nice sleuthing. I had a look in the tocalls document and found nothing. 

Just had a quick poke around the website you listed and can’t find anything that provides useful information about the APRS portion. Looks like it might just be a noise maker that only sends out information and doesn’t actually communicate. 

The original query made it sound like he was getting responses to some queries. At least that’s how I read the statements made. 

James

On Fri, Feb 19, 2021 at 1:40 PM Randy Love <rlove31@...> wrote:

On Fri, Feb 19, 2021 at 3:29 PM Randy Love via groups.io <rlove31=gmail.com@groups.io> wrote:

The BM TOCALL is APBMxD, so it's not from the Brandmeister network, it's something else... 
APZDMR isn't in the tocalls.txt on aprs.org

Randy
WF5X

TO-CALL

APBMxx is officially assigned to BrandMeister (http://www.aprs.org/aprs11/tocalls.txt)

  • APBMnD is in use by main software (BrandMeister DMR Server)
  • APBMnS is reserved for supplimentary services such as rpt2aprs

On Fri, Feb 19, 2021 at 3:25 PM Randy Love <rlove31@...> wrote:
Here is a page that describes it as DMR APRS... but it's not REALLY APRS... 


Randy 
WF5X


On Fri, Feb 19, 2021 at 3:20 PM Randy Love via groups.io <rlove31=gmail.com@groups.io> wrote:
Just a hunch, but I bet that APZDMR is one-way GPS data from DMR devices to APRS... 
In that case, the person's DMR radio probably doesn't actually support true APRS functionality.
Randy
WF5X



On Fri, Feb 19, 2021 at 12:06 PM James Ewen <ve6srv@...> wrote:
SV1WE does not appear to be running APRSISCE/32.

2021-02-18 16:05:50 MST: SV1WE>APZDMR,QTH*,TCPIP*,qAU,SIXTH:)SV1WE-DP!3749.10N/02348.97ErRNG0034 IPSC2-GR-DMO MMDVM 431.0500 MHz 

APRSISCE/32 uses a tocall of APWW11 as seen in Lynn's packet.

 KJ4ERJ>APWW11,TCPIP*,qAC,EIGHTH:@165022h2759.79N/08039.53WlFull Feed Monitor!wwu!Ej.

You asked:

"Does ?APRSP QUERY work in APRSIS32 please?"

The answer is yes, it does work. APRSISCE/32 can send the query, and it can respond to the query. The question you need answered is does the application that IDs as APZDMR in the tocall respond to ?APRSP?

It seems that you know the answer to this question... No response means no it doesn't.

James
VE6SRV


On Wed, Feb 17, 2021 at 8:57 AM Demetre - M0SUY/SV1UY <demetre.sv1uy@...> wrote:
Thanks Lynn,

It seems that when I send ?APRSP to a station I can hear on RF, then I get a reply to my QUERY.

When I send a Directed QUERY to RF addressed to a station I cannot hear directly and it has to go via an IGATE-Internet-IGATE and back to his local RF, as in the case of SV1WE who is in Athens-GR and I am in Gateshead-UK, then he does not reply to it! He does reply to most other QUERIES though. I tested ?DX, ?VER, ?APRSD, ?APRSH etc.

All other DIRECTED QUERIES work immediately, but ?APRSP, work fine. This is what puzzles me!

--
73 de Demetre M0SUY/SV1UY
APRS: 1st & best Social Network





--
James
VE6SRV


Re: ?APRSP

Randy Love
 


On Fri, Feb 19, 2021 at 3:29 PM Randy Love via groups.io <rlove31=gmail.com@groups.io> wrote:

The BM TOCALL is APBMxD, so it's not from the Brandmeister network, it's something else... 
APZDMR isn't in the tocalls.txt on aprs.org

Randy
WF5X

TO-CALL

APBMxx is officially assigned to BrandMeister (http://www.aprs.org/aprs11/tocalls.txt)

  • APBMnD is in use by main software (BrandMeister DMR Server)
  • APBMnS is reserved for supplimentary services such as rpt2aprs

On Fri, Feb 19, 2021 at 3:25 PM Randy Love <rlove31@...> wrote:
Here is a page that describes it as DMR APRS... but it's not REALLY APRS... 


Randy 
WF5X


On Fri, Feb 19, 2021 at 3:20 PM Randy Love via groups.io <rlove31=gmail.com@groups.io> wrote:
Just a hunch, but I bet that APZDMR is one-way GPS data from DMR devices to APRS... 
In that case, the person's DMR radio probably doesn't actually support true APRS functionality.
Randy
WF5X



On Fri, Feb 19, 2021 at 12:06 PM James Ewen <ve6srv@...> wrote:
SV1WE does not appear to be running APRSISCE/32.

2021-02-18 16:05:50 MST: SV1WE>APZDMR,QTH*,TCPIP*,qAU,SIXTH:)SV1WE-DP!3749.10N/02348.97ErRNG0034 IPSC2-GR-DMO MMDVM 431.0500 MHz 

APRSISCE/32 uses a tocall of APWW11 as seen in Lynn's packet.

 KJ4ERJ>APWW11,TCPIP*,qAC,EIGHTH:@165022h2759.79N/08039.53WlFull Feed Monitor!wwu!Ej.

You asked:

"Does ?APRSP QUERY work in APRSIS32 please?"

The answer is yes, it does work. APRSISCE/32 can send the query, and it can respond to the query. The question you need answered is does the application that IDs as APZDMR in the tocall respond to ?APRSP?

It seems that you know the answer to this question... No response means no it doesn't.

James
VE6SRV


On Wed, Feb 17, 2021 at 8:57 AM Demetre - M0SUY/SV1UY <demetre.sv1uy@...> wrote:
Thanks Lynn,

It seems that when I send ?APRSP to a station I can hear on RF, then I get a reply to my QUERY.

When I send a Directed QUERY to RF addressed to a station I cannot hear directly and it has to go via an IGATE-Internet-IGATE and back to his local RF, as in the case of SV1WE who is in Athens-GR and I am in Gateshead-UK, then he does not reply to it! He does reply to most other QUERIES though. I tested ?DX, ?VER, ?APRSD, ?APRSH etc.

All other DIRECTED QUERIES work immediately, but ?APRSP, work fine. This is what puzzles me!

--
73 de Demetre M0SUY/SV1UY
APRS: 1st & best Social Network






Re: ?APRSP

Randy Love
 


The BM TOCALL is APBMxD, so it's not from the Brandmeister network, it's something else... 
APZDMR isn't in the tocalls.txt on aprs.org

Randy
WF5X

TO-CALL

APBMxx is officially assigned to BrandMeister (http://www.aprs.org/aprs11/tocalls.txt)

  • APBMnD is in use by main software (BrandMeister DMR Server)
  • APBMnS is reserved for supplimentary services such as rpt2aprs


On Fri, Feb 19, 2021 at 3:25 PM Randy Love <rlove31@...> wrote:
Here is a page that describes it as DMR APRS... but it's not REALLY APRS... 


Randy 
WF5X


On Fri, Feb 19, 2021 at 3:20 PM Randy Love via groups.io <rlove31=gmail.com@groups.io> wrote:
Just a hunch, but I bet that APZDMR is one-way GPS data from DMR devices to APRS... 
In that case, the person's DMR radio probably doesn't actually support true APRS functionality.
Randy
WF5X



On Fri, Feb 19, 2021 at 12:06 PM James Ewen <ve6srv@...> wrote:
SV1WE does not appear to be running APRSISCE/32.

2021-02-18 16:05:50 MST: SV1WE>APZDMR,QTH*,TCPIP*,qAU,SIXTH:)SV1WE-DP!3749.10N/02348.97ErRNG0034 IPSC2-GR-DMO MMDVM 431.0500 MHz 

APRSISCE/32 uses a tocall of APWW11 as seen in Lynn's packet.

 KJ4ERJ>APWW11,TCPIP*,qAC,EIGHTH:@165022h2759.79N/08039.53WlFull Feed Monitor!wwu!Ej.

You asked:

"Does ?APRSP QUERY work in APRSIS32 please?"

The answer is yes, it does work. APRSISCE/32 can send the query, and it can respond to the query. The question you need answered is does the application that IDs as APZDMR in the tocall respond to ?APRSP?

It seems that you know the answer to this question... No response means no it doesn't.

James
VE6SRV


On Wed, Feb 17, 2021 at 8:57 AM Demetre - M0SUY/SV1UY <demetre.sv1uy@...> wrote:
Thanks Lynn,

It seems that when I send ?APRSP to a station I can hear on RF, then I get a reply to my QUERY.

When I send a Directed QUERY to RF addressed to a station I cannot hear directly and it has to go via an IGATE-Internet-IGATE and back to his local RF, as in the case of SV1WE who is in Athens-GR and I am in Gateshead-UK, then he does not reply to it! He does reply to most other QUERIES though. I tested ?DX, ?VER, ?APRSD, ?APRSH etc.

All other DIRECTED QUERIES work immediately, but ?APRSP, work fine. This is what puzzles me!

--
73 de Demetre M0SUY/SV1UY
APRS: 1st & best Social Network






Re: ?APRSP

Randy Love
 

Here is a page that describes it as DMR APRS... but it's not REALLY APRS... 


Randy 
WF5X


On Fri, Feb 19, 2021 at 3:20 PM Randy Love via groups.io <rlove31=gmail.com@groups.io> wrote:
Just a hunch, but I bet that APZDMR is one-way GPS data from DMR devices to APRS... 
In that case, the person's DMR radio probably doesn't actually support true APRS functionality.
Randy
WF5X



On Fri, Feb 19, 2021 at 12:06 PM James Ewen <ve6srv@...> wrote:
SV1WE does not appear to be running APRSISCE/32.

2021-02-18 16:05:50 MST: SV1WE>APZDMR,QTH*,TCPIP*,qAU,SIXTH:)SV1WE-DP!3749.10N/02348.97ErRNG0034 IPSC2-GR-DMO MMDVM 431.0500 MHz 

APRSISCE/32 uses a tocall of APWW11 as seen in Lynn's packet.

 KJ4ERJ>APWW11,TCPIP*,qAC,EIGHTH:@165022h2759.79N/08039.53WlFull Feed Monitor!wwu!Ej.

You asked:

"Does ?APRSP QUERY work in APRSIS32 please?"

The answer is yes, it does work. APRSISCE/32 can send the query, and it can respond to the query. The question you need answered is does the application that IDs as APZDMR in the tocall respond to ?APRSP?

It seems that you know the answer to this question... No response means no it doesn't.

James
VE6SRV


On Wed, Feb 17, 2021 at 8:57 AM Demetre - M0SUY/SV1UY <demetre.sv1uy@...> wrote:
Thanks Lynn,

It seems that when I send ?APRSP to a station I can hear on RF, then I get a reply to my QUERY.

When I send a Directed QUERY to RF addressed to a station I cannot hear directly and it has to go via an IGATE-Internet-IGATE and back to his local RF, as in the case of SV1WE who is in Athens-GR and I am in Gateshead-UK, then he does not reply to it! He does reply to most other QUERIES though. I tested ?DX, ?VER, ?APRSD, ?APRSH etc.

All other DIRECTED QUERIES work immediately, but ?APRSP, work fine. This is what puzzles me!

--
73 de Demetre M0SUY/SV1UY
APRS: 1st & best Social Network






Re: ?APRSP

Randy Love
 

Just a hunch, but I bet that APZDMR is one-way GPS data from DMR devices to APRS... 
In that case, the person's DMR radio probably doesn't actually support true APRS functionality.
Randy
WF5X



On Fri, Feb 19, 2021 at 12:06 PM James Ewen <ve6srv@...> wrote:
SV1WE does not appear to be running APRSISCE/32.

2021-02-18 16:05:50 MST: SV1WE>APZDMR,QTH*,TCPIP*,qAU,SIXTH:)SV1WE-DP!3749.10N/02348.97ErRNG0034 IPSC2-GR-DMO MMDVM 431.0500 MHz 

APRSISCE/32 uses a tocall of APWW11 as seen in Lynn's packet.

 KJ4ERJ>APWW11,TCPIP*,qAC,EIGHTH:@165022h2759.79N/08039.53WlFull Feed Monitor!wwu!Ej.

You asked:

"Does ?APRSP QUERY work in APRSIS32 please?"

The answer is yes, it does work. APRSISCE/32 can send the query, and it can respond to the query. The question you need answered is does the application that IDs as APZDMR in the tocall respond to ?APRSP?

It seems that you know the answer to this question... No response means no it doesn't.

James
VE6SRV


On Wed, Feb 17, 2021 at 8:57 AM Demetre - M0SUY/SV1UY <demetre.sv1uy@...> wrote:
Thanks Lynn,

It seems that when I send ?APRSP to a station I can hear on RF, then I get a reply to my QUERY.

When I send a Directed QUERY to RF addressed to a station I cannot hear directly and it has to go via an IGATE-Internet-IGATE and back to his local RF, as in the case of SV1WE who is in Athens-GR and I am in Gateshead-UK, then he does not reply to it! He does reply to most other QUERIES though. I tested ?DX, ?VER, ?APRSD, ?APRSH etc.

All other DIRECTED QUERIES work immediately, but ?APRSP, work fine. This is what puzzles me!

--
73 de Demetre M0SUY/SV1UY
APRS: 1st & best Social Network






Re: Connecting APRSIS32 to APRX or DIXPRS

MARINO MELONI
 

Rob,

I thought I had to create a port in APRX that was accessible to any Kiss client, that is why I created it with localhost, and I also tried with the IP of APRX host. Now, following your suggestion, I also tested putting the IP address of the APRSIS32 host, but the result is the same, sames errors appear.

Lynn,

So If I well understand, APRX is not listening on that port what APRSISCE/32 is sending to initiate two way communication.


My question to all now is:  
- Do I well understand that I cannot use APRSISCE/32 to communicate with a remote TNC running as digi and gateway (I know that I can connect it probably using SOCAT or similar, but at that point it will be a one to one connection and it will not gate directly any data)

- Do someone know how can I connect remotely from a pc running APRSISCE/32 to a TNC2 connected to a sw that run as digi/igate?


I'm pretty sure years ago I did it, unfortunately I cannot remember that I used to reach this result. I hope someone did it and may help.


Re: Connecting APRSIS32 to APRX or DIXPRS

Lynn Deffenbaugh
 

APRSISCE/32 does not accept incoming connections from TNCs or other external devices.  APRSISCE/32 expects the device to be listening for an incoming connection that APRSISCE/32 will initiate.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32


On 2/19/2021 12:19 PM, Rob Giuliano via groups.io wrote:
The last time I used APRX was with my WRT54, so it is a bit rusty.

First, you want Simply(KISS) in APRSIS32 because you will not need any <OpenCmd> or <ClosseCmd> commands for this port configuration.
  The other ports (KISS and radio specific) have defined information that is sent to properly initialize the TNC.

Your interface is trying to connect to itself (localhost).
I am pretty sure you want that interface to connect to APRSIS32.

# This port tries to connect to your APRSIS32 application - assumed on another computer.
# I am not sure what APRX will do if that application (port) is not open.  I assume wait for it.
<interface>
      tcp-device   {APRSIS32 IP} 8100    KISS
      callsign     iw2ejh-14
      tx-ok true
</interface>

# This port connects to your TNC2 - assumed already functioning.
<interface>
      serial-device {device settings per APRX manual}
      callsign     iw2ejh-1        {for referencing below, use your current settings}
      {All your related settings for the TNC2 ??}
</interface>

# Send all received packets from TNC2 to APRSIS32
<digipeater>
      transmitter iw2ejh-1
      <source>
            source iw2ejh-14
      </source>
</digipeater>

# Send all received packets (according to the port configuration) from APRSIS32 to TNC2
<digipeater>
      transmitter iw2ejh-14
      <source>
            source iw2ejh-1
      </source>
</digipeater>

I am pretty sure that was how I had it working on my WRT54.  I tried to find copies of my old aprx.conf files from back then, but I am sure they are long gone.


Re: Connecting APRSIS32 to APRX or DIXPRS

Rob Giuliano
 

The last time I used APRX was with my WRT54, so it is a bit rusty.

First, you want Simply(KISS) in APRSIS32 because you will not need any <OpenCmd> or <ClosseCmd> commands for this port configuration.
  The other ports (KISS and radio specific) have defined information that is sent to properly initialize the TNC.

Your interface is trying to connect to itself (localhost).
I am pretty sure you want that interface to connect to APRSIS32.

# This port tries to connect to your APRSIS32 application - assumed on another computer.
# I am not sure what APRX will do if that application (port) is not open.  I assume wait for it.
<interface>
      tcp-device   {APRSIS32 IP} 8100    KISS
      callsign     iw2ejh-14
      tx-ok true
</interface>

# This port connects to your TNC2 - assumed already functioning.
<interface>
      serial-device {device settings per APRX manual}
      callsign     iw2ejh-1        {for referencing below, use your current settings}
      {All your related settings for the TNC2 ??}
</interface>

# Send all received packets from TNC2 to APRSIS32
<digipeater>
      transmitter iw2ejh-1
      <source>
            source iw2ejh-14
      </source>
</digipeater>

# Send all received packets (according to the port configuration) from APRSIS32 to TNC2
<digipeater>
      transmitter iw2ejh-14
      <source>
            source iw2ejh-1
      </source>
</digipeater>

I am pretty sure that was how I had it working on my WRT54.  I tried to find copies of my old aprx.conf files from back then, but I am sure they are long gone.


Re: ?APRSP

James Ewen
 

SV1WE does not appear to be running APRSISCE/32.

2021-02-18 16:05:50 MST: SV1WE>APZDMR,QTH*,TCPIP*,qAU,SIXTH:)SV1WE-DP!3749.10N/02348.97ErRNG0034 IPSC2-GR-DMO MMDVM 431.0500 MHz 

APRSISCE/32 uses a tocall of APWW11 as seen in Lynn's packet.

 KJ4ERJ>APWW11,TCPIP*,qAC,EIGHTH:@165022h2759.79N/08039.53WlFull Feed Monitor!wwu!Ej.

You asked:

"Does ?APRSP QUERY work in APRSIS32 please?"

The answer is yes, it does work. APRSISCE/32 can send the query, and it can respond to the query. The question you need answered is does the application that IDs as APZDMR in the tocall respond to ?APRSP?

It seems that you know the answer to this question... No response means no it doesn't.

James
VE6SRV


On Wed, Feb 17, 2021 at 8:57 AM Demetre - M0SUY/SV1UY <demetre.sv1uy@...> wrote:
Thanks Lynn,

It seems that when I send ?APRSP to a station I can hear on RF, then I get a reply to my QUERY.

When I send a Directed QUERY to RF addressed to a station I cannot hear directly and it has to go via an IGATE-Internet-IGATE and back to his local RF, as in the case of SV1WE who is in Athens-GR and I am in Gateshead-UK, then he does not reply to it! He does reply to most other QUERIES though. I tested ?DX, ?VER, ?APRSD, ?APRSH etc.

All other DIRECTED QUERIES work immediately, but ?APRSP, work fine. This is what puzzles me!

--
73 de Demetre M0SUY/SV1UY
APRS: 1st & best Social Network






Re: Connecting APRSIS32 to APRX or DIXPRS

MARINO MELONI
 

Thanks Robert for reviewing my question.

I want to configure APRX using the second option. basically I would like aprx to be used like direwolf, presenting two host ports for remote connection (and yes, actually I am connected to direwolf with that method, but what I need is to connect to the TNC2 that is interconnect with aprx.)
I did some test, configuring aprx as below and creating a simplykiss port in aprsis32 (I also tested a pure kiss port but similar results) and there is no connection betweem the two ports. It seems aprx is not creating a port in host mode, and aprsis32 get no answers to it requests

aprx.conf

# my test with aprsis32 I/O port
<interface>
      tcp-device   localhost 8100    KISS
      callsign     iw2ejh-14
      tx-ok true
</interface>



APRX error log

socket connect() preparing: tcp!192.168.1.71!4100!
2021-02-19 11:08:31.531 TTY tcp!192.168.1.71!4100! EOF - CLOSED, WAITING 30 SECS

APRSIS32 port log

Port(__aprx__kiss):2021-02-19T12:38:09.415 Restarting Reader...
Port(__aprx__kiss):2021-02-19T12:38:09.415 TcpReader Running on @192.168.1.71 or 192.168.1.71:4100 (1 OpenCmds, 1 CloseCmds)
Port(__aprx__kiss):2021-02-19T12:38:11.420 connect errno 10061
Port(__aprx__kiss):2021-02-19T12:38:11.420 connect(@192.168.1.71) Failed
Port(__aprx__kiss):2021-02-19T12:38:11.420 Delaying Restart for 17994/20000 msec


Re: Connecting APRSIS32 to APRX or DIXPRS

Rob Giuliano
 

I haven't seen a reply yet, so I'll give it a shot.

I am not familiar with DIXPRS, but APRX will interface with APRSIS32 through either an AGW port or KISS over TCP port.  They key is for each application to have a single device (TNC) attached to it.

OPTION 1:
If APRSIS32 will be available all the time and have internet access, you can set APRSIS32 as a 'local APRS Server" and have APRX and/or DIXPRS connect to them as if APRSIS32 is just like noam.aprs2.net.  APRSIS32 would then forward the infomration to its APRS-IS server and all should work - as long as APRSIS32 is running and has access to both sides.

OPTION 2:
Configure each as a KISS/TCP port

>>> For APRX it is something like:
   <interface>
      tcp-device    {IP and port of the APRSIS32 configuration}
       callsign        {call}-{ssid}
       tx-ok            true
   </interface>
Then in APRSIS32 configure a Simply(KISS) port set over TCP and point to the IP of this device.


>>> For Direwolf -> uncomment one or both of the interfaces:
        AGWPORT 8000
        KISSPORT 8001
Then in APRSIS32 configure a Simply(KISS) port set over TCP and point to the IP of this device, or an AGW port withe IP and port of this device


>>> For DIXPRS -> couldn't find any info on KISS over TCP.
I didn't see infomration on configuring either KISS over TCP or AGW.


 I hope this helps.

Robert Giuliano
KB8RCO



On Thursday, February 18, 2021, 9:07:00 AM EST, MARINO MELONI via groups.io <iw2ejh@...> wrote:


Good day to all

In the past I use to run APRSIS32 24/7 on an old laptop and I interfaced it with several TNC, virtual (Direwolf) and real (TNC2) everything was configured along the years and was running fine. Several years ago, after the laptop died, I replaced everything with a couple of Raspberry pi. Actually I'm running APRX and DIXPRS on these, with actually two ports, one connected to Direwolf, and one using the TNC2 in Kiss mode.
My goal now is to use aprsis32 from my laptop in another room to connect remotely to one of these two programs in order to be able to have access to the APRS network.
I know in the past I was able to run several different computers around my house and was able di interconnect everything, sending/receiving messages from every pc, but now after several years, I do not remember if I had to configure in a particular way APRX, or DIXPRS or if I installed another software to share the TNC access between several devices around the house. (I'm getting old, and I'm loosing memory).  
I tried to search in the group, but I didn't found a clear answer how to reach the goal.
I hope someone can help me to connect aprsis32  via TCP/IP one of my TNC via some of the software I'm running.
Thanks
IW2EJH
Marino


Connecting APRSIS32 to APRX or DIXPRS

MARINO MELONI
 

Good day to all

In the past I use to run APRSIS32 24/7 on an old laptop and I interfaced it with several TNC, virtual (Direwolf) and real (TNC2) everything was configured along the years and was running fine. Several years ago, after the laptop died, I replaced everything with a couple of Raspberry pi. Actually I'm running APRX and DIXPRS on these, with actually two ports, one connected to Direwolf, and one using the TNC2 in Kiss mode.
My goal now is to use aprsis32 from my laptop in another room to connect remotely to one of these two programs in order to be able to have access to the APRS network.
I know in the past I was able to run several different computers around my house and was able di interconnect everything, sending/receiving messages from every pc, but now after several years, I do not remember if I had to configure in a particular way APRX, or DIXPRS or if I installed another software to share the TNC access between several devices around the house. (I'm getting old, and I'm loosing memory).  
I tried to search in the group, but I didn't found a clear answer how to reach the goal.
I hope someone can help me to connect aprsis32  via TCP/IP one of my TNC via some of the software I'm running.
Thanks
IW2EJH
Marino


Re: ?APRSP

Demetre - M0SUY/SV1UY
 

Thanks Lynn,

It seems that when I send ?APRSP to a station I can hear on RF, then I get a reply to my QUERY.

When I send a Directed QUERY to RF addressed to a station I cannot hear directly and it has to go via an IGATE-Internet-IGATE and back to his local RF, as in the case of SV1WE who is in Athens-GR and I am in Gateshead-UK, then he does not reply to it! He does reply to most other QUERIES though. I tested ?DX, ?VER, ?APRSD, ?APRSH etc.

All other DIRECTED QUERIES work immediately, but ?APRSP, work fine. This is what puzzles me!

--
73 de Demetre M0SUY/SV1UY
APRS: 1st & best Social Network


Re: ?APRSP

Lynn Deffenbaugh
 

?APRSP does work and is acted on when received in an APRS message by an APRSIS32 instance.  However, IIRC the original specification of that query was not as an APRS message, but as a non-directed query packet.  APRSIS32 does not support sending such queries because I didn't want to risk flooding the channel with the responses.

Just re-checked aprs101.pdf and there are "General" and "Directed" queries.  APRSIS32 only supports "Directed" queries which are the payload of an APRS message packet.  And my memory was worng (sic) on the ?APRSP as it is documented only as a directed query.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32


On 2/17/2021 6:05 AM, Adam Mahnke wrote:
It appears to be working fine on my home station.

What station are you trying to get to send a position that it isn't working?

Adam
KC2ANT

Sent from my LG V40 ThinQ, an AT&T 5G Evolution capable smartphone

------ Original message------
From: Demetre - M0SUY/SV1UY
Date: Wed, Feb 17, 2021 05:29
Cc:
Subject:[APRSISCE] ?APRSP

Hi all,

Does ?APRSP QUERY work in APRSIS32 please? It is supposed to work when you select MULTITTRACK also, but since no station replies to ?APRSP I wonder if the receiving station has to activate something in the menus.
I use the latest development version and all my friends who I send the ?APRSP queries also use the development version.
All other QUERIES work fine for us. ?APRSP does not seem to do anything.
Any ideas?

--
73 de Demetre M0SUY/SV1UY
APRS: 1st & best Social Network






Re: ?APRSP

Adam Mahnke <kc2ant@...>
 

It appears to be working fine on my home station.

What station are you trying to get to send a position that it isn't working?

Adam
KC2ANT

Sent from my LG V40 ThinQ, an AT&T 5G Evolution capable smartphone

------ Original message------
From: Demetre - M0SUY/SV1UY
Date: Wed, Feb 17, 2021 05:29
To: APRSISCE@groups.io;
Cc:
Subject:[APRSISCE] ?APRSP

Hi all,

Does ?APRSP QUERY work in APRSIS32 please? It is supposed to work when you select MULTITTRACK also, but since no station replies to ?APRSP I wonder if the receiving station has to activate something in the menus.
I use the latest development version and all my friends who I send the ?APRSP queries also use the development version.
All other QUERIES work fine for us. ?APRSP does not seem to do anything.
Any ideas?

--
73 de Demetre M0SUY/SV1UY
APRS: 1st & best Social Network






?APRSP

Demetre - M0SUY/SV1UY
 

Hi all,

Does ?APRSP QUERY work in APRSIS32 please? It is supposed to work when you select MULTITTRACK also, but since no station replies to ?APRSP I wonder if the receiving station has to activate something in the menus.
I use the latest development version and all my friends who I send the ?APRSP queries also use the development version.
All other QUERIES work fine for us. ?APRSP does not seem to do anything.
Any ideas?

--
73 de Demetre M0SUY/SV1UY
APRS: 1st & best Social Network


Re: full screen startup

James Ewen
 

There’s something wonky about Windows that Lynn says doesn’t support opening in full screen mode. 

I have never figured out what it is, but APRS-IS has to be windowed to be able to save its configuration. That means when you save the config, it’s not full screen, which means when it opens again, you come up windowed. 

Every other Windows program seems to work differently, but Lynn has said over and over again it has to be in a less than full screen mode. 

Drag your window to almost full screen and you’re close. Or, click on the full screen button after a start. 

James
VE6SRV 

On Tue, Feb 16, 2021 at 3:19 PM Steve Black via groups.io <kb1chu=aol.com@groups.io> wrote:
My copy of APRSIS opens with a partial screen. I would prefer it to open
in fullscreen mode if possible. I guess its in the config XML file but I
need a refresher as I can't find it. Thanks Steve kb1chu






--
James
VE6SRV


full screen startup

Steve Black
 

My copy of APRSIS opens with a partial screen. I would prefer it to open in fullscreen mode if possible. I guess its in the config XML file but I need a refresher as I can't find it. Thanks Steve kb1chu


Re: No Map

Rob Giuliano
 

Did you leave the -1 at the end of the passcode as you indicate below?  You need to delete that.

However, the gray screen is more like fixed by Lynn's and/or Fred's suggestion.


On 2/15/2021 3:54 PM, More Pi wrote:
I realize this topic has been beat to death, but no map. Gray screen only. No map displays. I have an internet connection. I have downloaded and installed APRSIS software  Windows 32 for Windows 10 operating system. My computer is not hooked up to my radio. Watched First Use video. I have a passcode. I entered my Passcode xxxxx-1. I created an icon. I entered my callsign. I made no other changes or additions to the opening screen. On occasion I get a longitude latitude grid. No Map

1161 - 1180 of 36392