Date   
Re: Tiles not fetching?

Lynn Deffenbaugh
 

Can you zip up and e-mail me the renamed file?  And include any other journal files with the same name.  They're not supposed to be able to corrupt themselves.  But if you have one that wasn't fetching, I'd like to check out what it might have worng (sic) inside.

But wait, you're using MBTiles with APRSIS32?  I think the original OP is still using individual tile files.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/3/2020 1:32 PM, Rob Giuliano via groups.io wrote:
I just closed APRSIS32, renamed my OSMTiles.mbtiles file, and restarted.  Mapping fetching is working properly here.

Robert Giuliano
KB8RCO



On Sunday, May 3, 2020, 9:59:32 AM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:


There should be some OSM* trace logs available.  Bring those up and enable them then pan around a bit and see what they may have to tell you.

Also, can you e-mail your APRSIS32.XML file to me at KJ4ERJ@...?  I'd like to see the details of your tile server configurations and try them from here.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/3/2020 8:44 AM, Fred Hillhouse Jr (CruelShoes) wrote:
Is internet access enabled??

When did you last fetch tiles from the non-OSM servers? The links change occasionally or may not be available anymore.

Fred N7FMH 


On Sun, May 3, 2020, 8:22 AM Tony G <tg4360@...> wrote:
Responding here as requested.

Running Verison 2020/05/01 21:21 of APRSIS32.

Map configure set to original with the tile server of "tile.openstreetmap.org" it appears to be only loading tiles that were already on the machine.

When I either zoom in there's no "learning circle" as in the past versions and the lower levels don't  appear to load.  Zooming out also shows areas i haven't been to as not fetched.

Mapquest Air shows nothing.

ARC GIS Air and Nat Geo appear to also only be showing a few places I've fetched before.

DE KE4WFD

Re: Tiles not fetching?

Rob Giuliano
 

I just closed APRSIS32, renamed my OSMTiles.mbtiles file, and restarted.  Mapping fetching is working properly here.

Robert Giuliano
KB8RCO



On Sunday, May 3, 2020, 9:59:32 AM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:


There should be some OSM* trace logs available.  Bring those up and enable them then pan around a bit and see what they may have to tell you.

Also, can you e-mail your APRSIS32.XML file to me at KJ4ERJ@...?  I'd like to see the details of your tile server configurations and try them from here.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/3/2020 8:44 AM, Fred Hillhouse Jr (CruelShoes) wrote:
Is internet access enabled??

When did you last fetch tiles from the non-OSM servers? The links change occasionally or may not be available anymore.

Fred N7FMH 


On Sun, May 3, 2020, 8:22 AM Tony G <tg4360@...> wrote:
Responding here as requested.

Running Verison 2020/05/01 21:21 of APRSIS32.

Map configure set to original with the tile server of "tile.openstreetmap.org" it appears to be only loading tiles that were already on the machine.

When I either zoom in there's no "learning circle" as in the past versions and the lower levels don't  appear to load.  Zooming out also shows areas i haven't been to as not fetched.

Mapquest Air shows nothing.

ARC GIS Air and Nat Geo appear to also only be showing a few places I've fetched before.

DE KE4WFD

Re: Tiles not fetching?

Lynn Deffenbaugh
 

There should be some OSM* trace logs available.  Bring those up and enable them then pan around a bit and see what they may have to tell you.

Also, can you e-mail your APRSIS32.XML file to me at KJ4ERJ@...?  I'd like to see the details of your tile server configurations and try them from here.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/3/2020 8:44 AM, Fred Hillhouse Jr (CruelShoes) wrote:
Is internet access enabled??

When did you last fetch tiles from the non-OSM servers? The links change occasionally or may not be available anymore.

Fred N7FMH 


On Sun, May 3, 2020, 8:22 AM Tony G <tg4360@...> wrote:
Responding here as requested.

Running Verison 2020/05/01 21:21 of APRSIS32.

Map configure set to original with the tile server of "tile.openstreetmap.org" it appears to be only loading tiles that were already on the machine.

When I either zoom in there's no "learning circle" as in the past versions and the lower levels don't  appear to load.  Zooming out also shows areas i haven't been to as not fetched.

Mapquest Air shows nothing.

ARC GIS Air and Nat Geo appear to also only be showing a few places I've fetched before.

DE KE4WFD

Re: Tiles not fetching?

Fred Hillhouse Jr (CruelShoes)
 

Is internet access enabled??

When did you last fetch tiles from the non-OSM servers? The links change occasionally or may not be available anymore.

Fred N7FMH 


On Sun, May 3, 2020, 8:22 AM Tony G <tg4360@...> wrote:
Responding here as requested.

Running Verison 2020/05/01 21:21 of APRSIS32.

Map configure set to original with the tile server of "tile.openstreetmap.org" it appears to be only loading tiles that were already on the machine.

When I either zoom in there's no "learning circle" as in the past versions and the lower levels don't  appear to load.  Zooming out also shows areas i haven't been to as not fetched.

Mapquest Air shows nothing.

ARC GIS Air and Nat Geo appear to also only be showing a few places I've fetched before.

DE KE4WFD

Tiles not fetching?

Tony G
 

Responding here as requested.

Running Verison 2020/05/01 21:21 of APRSIS32.

Map configure set to original with the tile server of "tile.openstreetmap.org" it appears to be only loading tiles that were already on the machine.

When I either zoom in there's no "learning circle" as in the past versions and the lower levels don't  appear to load.  Zooming out also shows areas i haven't been to as not fetched.

Mapquest Air shows nothing.

ARC GIS Air and Nat Geo appear to also only be showing a few places I've fetched before.

DE KE4WFD

Tiles not fetching

Lynn Deffenbaugh
 

So, I'll need more details on what tile set, what zooms, and what behavior you're seeing.  A callsign-SSID would also be helpful if you're accessing my (ldeffenb.dnsalias.net) tile server.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

PS.  Hope you're a member of the APRSISCE group and please respond to just that group.

On 5/2/2020 10:17 PM, Tony G wrote:
Running 5/1 21:21

Map fetching below a particular zoom level not working or is it just me?


Re: Proposed General Release (Dev: 2020/05/01 21:21)

Michael Coslo
 

I agree. I’m going to search for an older version of WINE. My old version worked well, and they replaced it with a mess, at least as far as USB to serial adapters are concerned.

Software senescence arrives to Linux! 8^(

- 73 Mike N3LI -

On May 2, 2020, at 12:25 PM, Greg D <ko6th.greg@...> wrote:

Hi Rob,

It sounds like the Wine team is trying to be annoyance-for-annoyance compatible with Windows :(.

I'm on Wine 1.8.6 on an old OpenSuSE LEAP 42.1 system, and the upgrade to the latest went without a hitch. It's an iGate that I run 24x7, and all is working fine. Thanks for the "heads-up" for the future when I eventually upgrade the system.

Greg KO6TH

Re: Proposed General Release (Dev: 2020/05/01 21:21)

Greg D
 

Hi Rob,

Digging deep into the mental memory banks, probably beyond what they contain (i.e., this is a guess!).  I seem to recall the original Unix system console interface wasn't on a serial port, but the built-in monitor & keyboard.  This is from working on the early HP workstations back in the '80s.  That might explain the differentiation between /dev/tty* and /dev/ttyS*.  How there'd ever be 64 internal "consoles" is beyond me, but Linux, I presume, adopted the same convention as the earlier Unix systems.  More "compatibility", per the Wine topic, and something that pre-dates Udev by a couple of decades.

My old OpenSuSE system has all the devices pre-populated in /dev, with the tty[1..63] owned by the tty group, having a mode of 620 (which is frankly weird), and ttyS* owned by dialout, mode 660.  I created the links to the Com ports myself, and hand-entered them in the Wine registry so that APRSIS32 would see them, so I guess it's nice that a little automation has been put into the system.  Perhaps just a little too much automation.

Greg  KO6TH


Rob Giuliano via groups.io wrote:

I would argue their purpose was to ensure anything Linux 'sees' is mapped to WINE.
Why does Linux have
    tty - okay I know this one!
    tty0 - tty63
    ttyS0 - ttyS32
when only a few devices are actually present?
Isn't that what things like udev are for?

I will be doing a little investigating into possibly deleting some of these nonexistent devices and see if that cuts down what WINE sees.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 12:25:44 PM EDT, Greg D <ko6th.greg@...> wrote:


Hi Rob,

It sounds like the Wine team is trying to be annoyance-for-annoyance compatible with Windows :(. 

I'm on Wine 1.8.6 on an old OpenSuSE LEAP 42.1 system, and the upgrade to the latest went without a hitch.  It's an iGate that I run 24x7, and all is working fine.  Thanks for the "heads-up" for the future when I eventually upgrade the system.

Greg  KO6TH


Rob Giuliano via groups.io wrote:
I'll try a few more things and update the wiki - soon.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 10:36:15 AM EDT, Rob Giuliano via groups.io <kb8rco@...> wrote:


As near as I can tell, there is something in the WINE setup that automatically (and "unchangeably") links every ttyS## device in /dev to a com## in the .wine folder.  Linux (at least my XUbuntu) has ttyS0 - ttyS32.  Each USB serial device is added after that. 

Good news is that APRSIS32 "sees" all 33 (in my case) serial ports.  The bad news of course is that there is no guarantee of the USB order if you have more than 1 USB serial device.

Through investigation, I learned that udev rules can reallocate any of these com# device to a symlink device link other than an ttyS#, BUT WINE changes them back.  However, udev rule CAN override an existing device (with no hardware), that worked for me.  My desktop has 1 physical serial port on ttyS0 (com1), so I can reallocate any ttyS# with # > 0.  Just remember that COM# ports start with 1 and ttyS# devices start with 0 (zero), so my override of ttyS3 became com4.  A section of my udev rules file in /etc/udev/rules.d called 65-tnc.rules:

#65-tnc.rules
# TNC-X
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="tncx"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="ttyS3"

I have a line for each TNC device I connect, including some for Bluetooth connections, but I haven't tested those with WINE 5.0 yet.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 8:58:33 AM EDT, Michael Coslo via groups.io <mjc_n3li@...> wrote:


Hi Rob,

WINES’s handling of com ports flummoxed me. What used to be a simple symbolic link became something else indeed  ver 2.8 and later. The people at Codeweavers tried to help, but they had instructions for Mac, which were different enough that it didn’t work for me.

Needing my station up and running, I ended up removing Mint and reinstalling Windows 8.1, which is just too cruel! 8^)

When I’m not pressed for time, I’ll reinstall mint and try again.

But you might have the secret sauce for getting new versions of WINE to do the link?

Otherwise I might try again with an old version of WINE.

- 73 Mike N3LI -


> On May 2, 2020, at 12:56 AM, Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:
>
> Just upgraded my setup.  This includes latest XUbuntu (20.04) with WINE 5.0.
> Some features are new to me with the updated WINE version.
>
> APRSIS32 ran the normal update after clicking HELP.
> Other than connecting to my TNC (WINE changed COM port stuff), NO ISSUES here!
>
> I'll let it run now.
> Robert Giuliano
> KB8RCO
>
>
>
> On Friday, May 1, 2020, 10:02:06 PM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:
>
>
> I just pushed the subject version to development.  Please let me know if
> you successfully upgrade to this and if it initially looks ok.
>
> The only change since the last Development release is a spelling
> correction, changing the name for APRSISMO (check KJ4ERJ-12), and
> setting the new release timestamp.
>
> If this checks out, I'll push it to release sometime over the weekend.
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>
> Here are the proposed release notes.  They will be posted in full to the
> Wiki.
>
> Here's the major features in version 2020/05/01 21:21
>
> Updated ToCall and Mic-E definitions from:
> http://www.aprs.org/aprs11/tocalls.txt as of 17 Apr 2020 (updated
> 2020/04/27)
> http://aprs.org/aprs12/mic-e-types.txt through 4 Jun 2019 (Updated
> 2020/04/27)
>
> No longer suppress gating messages just because a station was heard
> INSIDE a 3rd party packet on RF.  See notes about KO6TH from 2018/09/03
> 11:36
>
> Support "Common Talker IDs" from
> http://www.catb.org/gpsd/NMEA.html#_talker_ids. See notes from
> 2017/07/17 15:05
>
> Support Always-On-Top in right click menu in both main and MultiTrack
> windows (not on CE)
>
> Support proprietary 4 digit precision extension (!DAO!xx) in Configure /
> Beacon / Precision / 4 Digits
>
> Draw a small heading arrow near symbols that beacon speed and course
>
> Support a Syslog-type port for APRISMO diagnostic capture (Development
> mode only)
>
> Added Screen / Labels / Nicknames / Delete All (n)
> Also, if you try to define a new nickname that uses the same label as an
> existing nickname, the Accept button will disable until the Label is unique.
>
> There's a new Configure / Aliases / Accumulate feature to "learn" local
> digipeater aliases for actual hop counting.
> (Note: these are things like WIDE, RELAY as well as the State and
> Regional aliases (SSn-N))
> See: http://aprsisce.wikidot.com/menu:configure-aliases
>
> Show both Non-alias used hop count and Simplistic used hop count in the
> Digi/IGate column of the packet scroller.
>
> Filtered gating of packets from -IS to RF, but only in Development
> mode.  See notes from 2012/08/31 08:02 below.
>
> There's a bunch of updates to the View / Platform submenu population and
> counting sprinkled throughout.
>
> There's a new Configure / Companions option described in 2012/09/04
> 21:26, 2012/09/06 02:03, 02:51, 13:35
>
> Support MiniDump creation on a detected crash.  This may create
> APRSIS32.DMP files in your execution directory that will assist me in
> determining the cause of crashes.
> If APRSIS32 generates a .DMP/DMZ file, it will automatically restart.
> Eventually it'll even auto-detect the .DMPs and offer to send them to me.
>
> Support port type of "Dummy" (connection type doesn't matter) to be a
> Transmit-Only Dummy Load for testing -IS to RF IGating in an RF-less
> environment.
>
> Count "Oth" packets for any packet that doesn't fit a defined type.
> These are the packets that a type (t/) filter can't pick up from a
> filtered feed.  These packet counts are display on the port status
> windows (right click in APRS-IS OK pane).
>
> There's a new set of "Busy Stations" windows available on the APRS-IS OK
> right click menu.  Read about them in 2012/09/27 07:39 below.
>
> Support Screen / Brightness / Bright/Dim which changes the background of
> the transparent maps from White to Black. Discovered on APRSISDR.  (Adam
> KC2ANT)
>
> The NMEA port now supports a direct TCP/IP connection to GPSd. Simply
> configure the NMEA port to use TCP/IP and point it to your GPSd
> instance.  If you've never heard of GPSd, don't worry about it.  If
> you've got a GPSd already running, then I don't need to tell you more,
> right?  (Steve G6UIM)
>
> RF Ports now have a "NoGate ME" checkbox to disable gating your own
> generated packets to the -IS if copied on a digipeat.
>
> Added zoom number in center of slider (breaks if/when I do fractional
> zooms).  (Greg KB3KBR, Fred N7FMH)
> The zoom number turns green (it might be hard to read) when you're
> zoomed in close enough to "Move ME".  (Greg KB3KBR)
>
> Ignore single character !shriek!s (!x! being put out by N5ETC-2)
>
> Properly parse local time (/) format specifier (Jerry KF5AOK)
>
> New support for JS8Call and FT8 log-scraping objects.  This is similar
> to the JT65 scraper that already existed.  Simply create new object of
> the appropriate type and point it to your ALL.TXT log file for the
> corresponding program.  Object will be created for any detected station
> for which a grid square is available. These are objects local to your
> instance only.
>
> Support for "Hashes".  These are similar to !shriek!s, but are delimited
> by a single preceding #, as in #JS8 or #EVENT.  More details on this to
> follow at some later date.
> Note that only 32 unique Hashes are currently supported.  This limit
> will be removed before this support is finalized.
>
> KISS (aka AX.25) callsigns are now limited to A..Z and 0..9. Invalid
> characters are simply removed from the transmitted callsign, so beware!
>
>
>
>
>
>





Re: Proposed General Release (Dev: 2020/05/01 21:21)

Rob Giuliano
 

I would argue their purpose was to ensure anything Linux 'sees' is mapped to WINE.
Why does Linux have
    tty - okay I know this one!
    tty0 - tty63
    ttyS0 - ttyS32
when only a few devices are actually present?
Isn't that what things like udev are for?

I will be doing a little investigating into possibly deleting some of these nonexistent devices and see if that cuts down what WINE sees.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 12:25:44 PM EDT, Greg D <ko6th.greg@...> wrote:


Hi Rob,

It sounds like the Wine team is trying to be annoyance-for-annoyance compatible with Windows :(. 

I'm on Wine 1.8.6 on an old OpenSuSE LEAP 42.1 system, and the upgrade to the latest went without a hitch.  It's an iGate that I run 24x7, and all is working fine.  Thanks for the "heads-up" for the future when I eventually upgrade the system.

Greg  KO6TH


Rob Giuliano via groups.io wrote:
I'll try a few more things and update the wiki - soon.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 10:36:15 AM EDT, Rob Giuliano via groups.io <kb8rco@...> wrote:


As near as I can tell, there is something in the WINE setup that automatically (and "unchangeably") links every ttyS## device in /dev to a com## in the .wine folder.  Linux (at least my XUbuntu) has ttyS0 - ttyS32.  Each USB serial device is added after that. 

Good news is that APRSIS32 "sees" all 33 (in my case) serial ports.  The bad news of course is that there is no guarantee of the USB order if you have more than 1 USB serial device.

Through investigation, I learned that udev rules can reallocate any of these com# device to a symlink device link other than an ttyS#, BUT WINE changes them back.  However, udev rule CAN override an existing device (with no hardware), that worked for me.  My desktop has 1 physical serial port on ttyS0 (com1), so I can reallocate any ttyS# with # > 0.  Just remember that COM# ports start with 1 and ttyS# devices start with 0 (zero), so my override of ttyS3 became com4.  A section of my udev rules file in /etc/udev/rules.d called 65-tnc.rules:

#65-tnc.rules
# TNC-X
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="tncx"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="ttyS3"

I have a line for each TNC device I connect, including some for Bluetooth connections, but I haven't tested those with WINE 5.0 yet.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 8:58:33 AM EDT, Michael Coslo via groups.io <mjc_n3li@...> wrote:


Hi Rob,

WINES’s handling of com ports flummoxed me. What used to be a simple symbolic link became something else indeed  ver 2.8 and later. The people at Codeweavers tried to help, but they had instructions for Mac, which were different enough that it didn’t work for me.

Needing my station up and running, I ended up removing Mint and reinstalling Windows 8.1, which is just too cruel! 8^)

When I’m not pressed for time, I’ll reinstall mint and try again.

But you might have the secret sauce for getting new versions of WINE to do the link?

Otherwise I might try again with an old version of WINE.

- 73 Mike N3LI -


> On May 2, 2020, at 12:56 AM, Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:
>
> Just upgraded my setup.  This includes latest XUbuntu (20.04) with WINE 5.0.
> Some features are new to me with the updated WINE version.
>
> APRSIS32 ran the normal update after clicking HELP.
> Other than connecting to my TNC (WINE changed COM port stuff), NO ISSUES here!
>
> I'll let it run now.
> Robert Giuliano
> KB8RCO
>
>
>
> On Friday, May 1, 2020, 10:02:06 PM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:
>
>
> I just pushed the subject version to development.  Please let me know if
> you successfully upgrade to this and if it initially looks ok.
>
> The only change since the last Development release is a spelling
> correction, changing the name for APRSISMO (check KJ4ERJ-12), and
> setting the new release timestamp.
>
> If this checks out, I'll push it to release sometime over the weekend.
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>
> Here are the proposed release notes.  They will be posted in full to the
> Wiki.
>
> Here's the major features in version 2020/05/01 21:21
>
> Updated ToCall and Mic-E definitions from:
> http://www.aprs.org/aprs11/tocalls.txt as of 17 Apr 2020 (updated
> 2020/04/27)
> http://aprs.org/aprs12/mic-e-types.txt through 4 Jun 2019 (Updated
> 2020/04/27)
>
> No longer suppress gating messages just because a station was heard
> INSIDE a 3rd party packet on RF.  See notes about KO6TH from 2018/09/03
> 11:36
>
> Support "Common Talker IDs" from
> http://www.catb.org/gpsd/NMEA.html#_talker_ids. See notes from
> 2017/07/17 15:05
>
> Support Always-On-Top in right click menu in both main and MultiTrack
> windows (not on CE)
>
> Support proprietary 4 digit precision extension (!DAO!xx) in Configure /
> Beacon / Precision / 4 Digits
>
> Draw a small heading arrow near symbols that beacon speed and course
>
> Support a Syslog-type port for APRISMO diagnostic capture (Development
> mode only)
>
> Added Screen / Labels / Nicknames / Delete All (n)
> Also, if you try to define a new nickname that uses the same label as an
> existing nickname, the Accept button will disable until the Label is unique.
>
> There's a new Configure / Aliases / Accumulate feature to "learn" local
> digipeater aliases for actual hop counting.
> (Note: these are things like WIDE, RELAY as well as the State and
> Regional aliases (SSn-N))
> See: http://aprsisce.wikidot.com/menu:configure-aliases
>
> Show both Non-alias used hop count and Simplistic used hop count in the
> Digi/IGate column of the packet scroller.
>
> Filtered gating of packets from -IS to RF, but only in Development
> mode.  See notes from 2012/08/31 08:02 below.
>
> There's a bunch of updates to the View / Platform submenu population and
> counting sprinkled throughout.
>
> There's a new Configure / Companions option described in 2012/09/04
> 21:26, 2012/09/06 02:03, 02:51, 13:35
>
> Support MiniDump creation on a detected crash.  This may create
> APRSIS32.DMP files in your execution directory that will assist me in
> determining the cause of crashes.
> If APRSIS32 generates a .DMP/DMZ file, it will automatically restart.
> Eventually it'll even auto-detect the .DMPs and offer to send them to me.
>
> Support port type of "Dummy" (connection type doesn't matter) to be a
> Transmit-Only Dummy Load for testing -IS to RF IGating in an RF-less
> environment.
>
> Count "Oth" packets for any packet that doesn't fit a defined type.
> These are the packets that a type (t/) filter can't pick up from a
> filtered feed.  These packet counts are display on the port status
> windows (right click in APRS-IS OK pane).
>
> There's a new set of "Busy Stations" windows available on the APRS-IS OK
> right click menu.  Read about them in 2012/09/27 07:39 below.
>
> Support Screen / Brightness / Bright/Dim which changes the background of
> the transparent maps from White to Black. Discovered on APRSISDR.  (Adam
> KC2ANT)
>
> The NMEA port now supports a direct TCP/IP connection to GPSd. Simply
> configure the NMEA port to use TCP/IP and point it to your GPSd
> instance.  If you've never heard of GPSd, don't worry about it.  If
> you've got a GPSd already running, then I don't need to tell you more,
> right?  (Steve G6UIM)
>
> RF Ports now have a "NoGate ME" checkbox to disable gating your own
> generated packets to the -IS if copied on a digipeat.
>
> Added zoom number in center of slider (breaks if/when I do fractional
> zooms).  (Greg KB3KBR, Fred N7FMH)
> The zoom number turns green (it might be hard to read) when you're
> zoomed in close enough to "Move ME".  (Greg KB3KBR)
>
> Ignore single character !shriek!s (!x! being put out by N5ETC-2)
>
> Properly parse local time (/) format specifier (Jerry KF5AOK)
>
> New support for JS8Call and FT8 log-scraping objects.  This is similar
> to the JT65 scraper that already existed.  Simply create new object of
> the appropriate type and point it to your ALL.TXT log file for the
> corresponding program.  Object will be created for any detected station
> for which a grid square is available. These are objects local to your
> instance only.
>
> Support for "Hashes".  These are similar to !shriek!s, but are delimited
> by a single preceding #, as in #JS8 or #EVENT.  More details on this to
> follow at some later date.
> Note that only 32 unique Hashes are currently supported.  This limit
> will be removed before this support is finalized.
>
> KISS (aka AX.25) callsigns are now limited to A..Z and 0..9. Invalid
> characters are simply removed from the transmitted callsign, so beware!
>
>
>
>
>
>




Re: Proposed General Release (Dev: 2020/05/01 21:21)

Greg D
 

Hi Rob,

It sounds like the Wine team is trying to be annoyance-for-annoyance compatible with Windows :(. 

I'm on Wine 1.8.6 on an old OpenSuSE LEAP 42.1 system, and the upgrade to the latest went without a hitch.  It's an iGate that I run 24x7, and all is working fine.  Thanks for the "heads-up" for the future when I eventually upgrade the system.

Greg  KO6TH


Rob Giuliano via groups.io wrote:

I'll try a few more things and update the wiki - soon.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 10:36:15 AM EDT, Rob Giuliano via groups.io <kb8rco@...> wrote:


As near as I can tell, there is something in the WINE setup that automatically (and "unchangeably") links every ttyS## device in /dev to a com## in the .wine folder.  Linux (at least my XUbuntu) has ttyS0 - ttyS32.  Each USB serial device is added after that. 

Good news is that APRSIS32 "sees" all 33 (in my case) serial ports.  The bad news of course is that there is no guarantee of the USB order if you have more than 1 USB serial device.

Through investigation, I learned that udev rules can reallocate any of these com# device to a symlink device link other than an ttyS#, BUT WINE changes them back.  However, udev rule CAN override an existing device (with no hardware), that worked for me.  My desktop has 1 physical serial port on ttyS0 (com1), so I can reallocate any ttyS# with # > 0.  Just remember that COM# ports start with 1 and ttyS# devices start with 0 (zero), so my override of ttyS3 became com4.  A section of my udev rules file in /etc/udev/rules.d called 65-tnc.rules:

#65-tnc.rules
# TNC-X
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="tncx"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="ttyS3"

I have a line for each TNC device I connect, including some for Bluetooth connections, but I haven't tested those with WINE 5.0 yet.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 8:58:33 AM EDT, Michael Coslo via groups.io <mjc_n3li@...> wrote:


Hi Rob,

WINES’s handling of com ports flummoxed me. What used to be a simple symbolic link became something else indeed  ver 2.8 and later. The people at Codeweavers tried to help, but they had instructions for Mac, which were different enough that it didn’t work for me.

Needing my station up and running, I ended up removing Mint and reinstalling Windows 8.1, which is just too cruel! 8^)

When I’m not pressed for time, I’ll reinstall mint and try again.

But you might have the secret sauce for getting new versions of WINE to do the link?

Otherwise I might try again with an old version of WINE.

- 73 Mike N3LI -


> On May 2, 2020, at 12:56 AM, Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:
>
> Just upgraded my setup.  This includes latest XUbuntu (20.04) with WINE 5.0.
> Some features are new to me with the updated WINE version.
>
> APRSIS32 ran the normal update after clicking HELP.
> Other than connecting to my TNC (WINE changed COM port stuff), NO ISSUES here!
>
> I'll let it run now.
> Robert Giuliano
> KB8RCO
>
>
>
> On Friday, May 1, 2020, 10:02:06 PM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:
>
>
> I just pushed the subject version to development.  Please let me know if
> you successfully upgrade to this and if it initially looks ok.
>
> The only change since the last Development release is a spelling
> correction, changing the name for APRSISMO (check KJ4ERJ-12), and
> setting the new release timestamp.
>
> If this checks out, I'll push it to release sometime over the weekend.
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>
> Here are the proposed release notes.  They will be posted in full to the
> Wiki.
>
> Here's the major features in version 2020/05/01 21:21
>
> Updated ToCall and Mic-E definitions from:
> http://www.aprs.org/aprs11/tocalls.txt as of 17 Apr 2020 (updated
> 2020/04/27)
> http://aprs.org/aprs12/mic-e-types.txt through 4 Jun 2019 (Updated
> 2020/04/27)
>
> No longer suppress gating messages just because a station was heard
> INSIDE a 3rd party packet on RF.  See notes about KO6TH from 2018/09/03
> 11:36
>
> Support "Common Talker IDs" from
> http://www.catb.org/gpsd/NMEA.html#_talker_ids. See notes from
> 2017/07/17 15:05
>
> Support Always-On-Top in right click menu in both main and MultiTrack
> windows (not on CE)
>
> Support proprietary 4 digit precision extension (!DAO!xx) in Configure /
> Beacon / Precision / 4 Digits
>
> Draw a small heading arrow near symbols that beacon speed and course
>
> Support a Syslog-type port for APRISMO diagnostic capture (Development
> mode only)
>
> Added Screen / Labels / Nicknames / Delete All (n)
> Also, if you try to define a new nickname that uses the same label as an
> existing nickname, the Accept button will disable until the Label is unique.
>
> There's a new Configure / Aliases / Accumulate feature to "learn" local
> digipeater aliases for actual hop counting.
> (Note: these are things like WIDE, RELAY as well as the State and
> Regional aliases (SSn-N))
> See: http://aprsisce.wikidot.com/menu:configure-aliases
>
> Show both Non-alias used hop count and Simplistic used hop count in the
> Digi/IGate column of the packet scroller.
>
> Filtered gating of packets from -IS to RF, but only in Development
> mode.  See notes from 2012/08/31 08:02 below.
>
> There's a bunch of updates to the View / Platform submenu population and
> counting sprinkled throughout.
>
> There's a new Configure / Companions option described in 2012/09/04
> 21:26, 2012/09/06 02:03, 02:51, 13:35
>
> Support MiniDump creation on a detected crash.  This may create
> APRSIS32.DMP files in your execution directory that will assist me in
> determining the cause of crashes.
> If APRSIS32 generates a .DMP/DMZ file, it will automatically restart.
> Eventually it'll even auto-detect the .DMPs and offer to send them to me.
>
> Support port type of "Dummy" (connection type doesn't matter) to be a
> Transmit-Only Dummy Load for testing -IS to RF IGating in an RF-less
> environment.
>
> Count "Oth" packets for any packet that doesn't fit a defined type.
> These are the packets that a type (t/) filter can't pick up from a
> filtered feed.  These packet counts are display on the port status
> windows (right click in APRS-IS OK pane).
>
> There's a new set of "Busy Stations" windows available on the APRS-IS OK
> right click menu.  Read about them in 2012/09/27 07:39 below.
>
> Support Screen / Brightness / Bright/Dim which changes the background of
> the transparent maps from White to Black. Discovered on APRSISDR.  (Adam
> KC2ANT)
>
> The NMEA port now supports a direct TCP/IP connection to GPSd. Simply
> configure the NMEA port to use TCP/IP and point it to your GPSd
> instance.  If you've never heard of GPSd, don't worry about it.  If
> you've got a GPSd already running, then I don't need to tell you more,
> right?  (Steve G6UIM)
>
> RF Ports now have a "NoGate ME" checkbox to disable gating your own
> generated packets to the -IS if copied on a digipeat.
>
> Added zoom number in center of slider (breaks if/when I do fractional
> zooms).  (Greg KB3KBR, Fred N7FMH)
> The zoom number turns green (it might be hard to read) when you're
> zoomed in close enough to "Move ME".  (Greg KB3KBR)
>
> Ignore single character !shriek!s (!x! being put out by N5ETC-2)
>
> Properly parse local time (/) format specifier (Jerry KF5AOK)
>
> New support for JS8Call and FT8 log-scraping objects.  This is similar
> to the JT65 scraper that already existed.  Simply create new object of
> the appropriate type and point it to your ALL.TXT log file for the
> corresponding program.  Object will be created for any detected station
> for which a grid square is available. These are objects local to your
> instance only.
>
> Support for "Hashes".  These are similar to !shriek!s, but are delimited
> by a single preceding #, as in #JS8 or #EVENT.  More details on this to
> follow at some later date.
> Note that only 32 unique Hashes are currently supported.  This limit
> will be removed before this support is finalized.
>
> KISS (aka AX.25) callsigns are now limited to A..Z and 0..9. Invalid
> characters are simply removed from the transmitted callsign, so beware!
>
>
>
>
>
>




Re: Proposed General Release (Dev: 2020/05/01 21:21)

Rob Giuliano
 

I'll try a few more things and update the wiki - soon.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 10:36:15 AM EDT, Rob Giuliano via groups.io <kb8rco@...> wrote:


As near as I can tell, there is something in the WINE setup that automatically (and "unchangeably") links every ttyS## device in /dev to a com## in the .wine folder.  Linux (at least my XUbuntu) has ttyS0 - ttyS32.  Each USB serial device is added after that. 

Good news is that APRSIS32 "sees" all 33 (in my case) serial ports.  The bad news of course is that there is no guarantee of the USB order if you have more than 1 USB serial device.

Through investigation, I learned that udev rules can reallocate any of these com# device to a symlink device link other than an ttyS#, BUT WINE changes them back.  However, udev rule CAN override an existing device (with no hardware), that worked for me.  My desktop has 1 physical serial port on ttyS0 (com1), so I can reallocate any ttyS# with # > 0.  Just remember that COM# ports start with 1 and ttyS# devices start with 0 (zero), so my override of ttyS3 became com4.  A section of my udev rules file in /etc/udev/rules.d called 65-tnc.rules:

#65-tnc.rules
# TNC-X
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="tncx"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="ttyS3"

I have a line for each TNC device I connect, including some for Bluetooth connections, but I haven't tested those with WINE 5.0 yet.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 8:58:33 AM EDT, Michael Coslo via groups.io <mjc_n3li@...> wrote:


Hi Rob,

WINES’s handling of com ports flummoxed me. What used to be a simple symbolic link became something else indeed  ver 2.8 and later. The people at Codeweavers tried to help, but they had instructions for Mac, which were different enough that it didn’t work for me.

Needing my station up and running, I ended up removing Mint and reinstalling Windows 8.1, which is just too cruel! 8^)

When I’m not pressed for time, I’ll reinstall mint and try again.

But you might have the secret sauce for getting new versions of WINE to do the link?

Otherwise I might try again with an old version of WINE.

- 73 Mike N3LI -


> On May 2, 2020, at 12:56 AM, Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:
>
> Just upgraded my setup.  This includes latest XUbuntu (20.04) with WINE 5.0.
> Some features are new to me with the updated WINE version.
>
> APRSIS32 ran the normal update after clicking HELP.
> Other than connecting to my TNC (WINE changed COM port stuff), NO ISSUES here!
>
> I'll let it run now.
> Robert Giuliano
> KB8RCO
>
>
>
> On Friday, May 1, 2020, 10:02:06 PM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:
>
>
> I just pushed the subject version to development.  Please let me know if
> you successfully upgrade to this and if it initially looks ok.
>
> The only change since the last Development release is a spelling
> correction, changing the name for APRSISMO (check KJ4ERJ-12), and
> setting the new release timestamp.
>
> If this checks out, I'll push it to release sometime over the weekend.
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>
> Here are the proposed release notes.  They will be posted in full to the
> Wiki.
>
> Here's the major features in version 2020/05/01 21:21
>
> Updated ToCall and Mic-E definitions from:
> http://www.aprs.org/aprs11/tocalls.txt as of 17 Apr 2020 (updated
> 2020/04/27)
> http://aprs.org/aprs12/mic-e-types.txt through 4 Jun 2019 (Updated
> 2020/04/27)
>
> No longer suppress gating messages just because a station was heard
> INSIDE a 3rd party packet on RF.  See notes about KO6TH from 2018/09/03
> 11:36
>
> Support "Common Talker IDs" from
> http://www.catb.org/gpsd/NMEA.html#_talker_ids. See notes from
> 2017/07/17 15:05
>
> Support Always-On-Top in right click menu in both main and MultiTrack
> windows (not on CE)
>
> Support proprietary 4 digit precision extension (!DAO!xx) in Configure /
> Beacon / Precision / 4 Digits
>
> Draw a small heading arrow near symbols that beacon speed and course
>
> Support a Syslog-type port for APRISMO diagnostic capture (Development
> mode only)
>
> Added Screen / Labels / Nicknames / Delete All (n)
> Also, if you try to define a new nickname that uses the same label as an
> existing nickname, the Accept button will disable until the Label is unique.
>
> There's a new Configure / Aliases / Accumulate feature to "learn" local
> digipeater aliases for actual hop counting.
> (Note: these are things like WIDE, RELAY as well as the State and
> Regional aliases (SSn-N))
> See: http://aprsisce.wikidot.com/menu:configure-aliases
>
> Show both Non-alias used hop count and Simplistic used hop count in the
> Digi/IGate column of the packet scroller.
>
> Filtered gating of packets from -IS to RF, but only in Development
> mode.  See notes from 2012/08/31 08:02 below.
>
> There's a bunch of updates to the View / Platform submenu population and
> counting sprinkled throughout.
>
> There's a new Configure / Companions option described in 2012/09/04
> 21:26, 2012/09/06 02:03, 02:51, 13:35
>
> Support MiniDump creation on a detected crash.  This may create
> APRSIS32.DMP files in your execution directory that will assist me in
> determining the cause of crashes.
> If APRSIS32 generates a .DMP/DMZ file, it will automatically restart.
> Eventually it'll even auto-detect the .DMPs and offer to send them to me.
>
> Support port type of "Dummy" (connection type doesn't matter) to be a
> Transmit-Only Dummy Load for testing -IS to RF IGating in an RF-less
> environment.
>
> Count "Oth" packets for any packet that doesn't fit a defined type.
> These are the packets that a type (t/) filter can't pick up from a
> filtered feed.  These packet counts are display on the port status
> windows (right click in APRS-IS OK pane).
>
> There's a new set of "Busy Stations" windows available on the APRS-IS OK
> right click menu.  Read about them in 2012/09/27 07:39 below.
>
> Support Screen / Brightness / Bright/Dim which changes the background of
> the transparent maps from White to Black. Discovered on APRSISDR.  (Adam
> KC2ANT)
>
> The NMEA port now supports a direct TCP/IP connection to GPSd. Simply
> configure the NMEA port to use TCP/IP and point it to your GPSd
> instance.  If you've never heard of GPSd, don't worry about it.  If
> you've got a GPSd already running, then I don't need to tell you more,
> right?  (Steve G6UIM)
>
> RF Ports now have a "NoGate ME" checkbox to disable gating your own
> generated packets to the -IS if copied on a digipeat.
>
> Added zoom number in center of slider (breaks if/when I do fractional
> zooms).  (Greg KB3KBR, Fred N7FMH)
> The zoom number turns green (it might be hard to read) when you're
> zoomed in close enough to "Move ME".  (Greg KB3KBR)
>
> Ignore single character !shriek!s (!x! being put out by N5ETC-2)
>
> Properly parse local time (/) format specifier (Jerry KF5AOK)
>
> New support for JS8Call and FT8 log-scraping objects.  This is similar
> to the JT65 scraper that already existed.  Simply create new object of
> the appropriate type and point it to your ALL.TXT log file for the
> corresponding program.  Object will be created for any detected station
> for which a grid square is available. These are objects local to your
> instance only.
>
> Support for "Hashes".  These are similar to !shriek!s, but are delimited
> by a single preceding #, as in #JS8 or #EVENT.  More details on this to
> follow at some later date.
> Note that only 32 unique Hashes are currently supported.  This limit
> will be removed before this support is finalized.
>
> KISS (aka AX.25) callsigns are now limited to A..Z and 0..9. Invalid
> characters are simply removed from the transmitted callsign, so beware!
>
>
>
>
>
>



Re: Earthquakes

Al Massaro
 

Thanks guys! I added both symbols and it appears that I am now receiving EQ information.
AL M
KF5SMH

Re: Proposed General Release (Dev: 2020/05/01 21:21)

Rob Giuliano
 

As near as I can tell, there is something in the WINE setup that automatically (and "unchangeably") links every ttyS## device in /dev to a com## in the .wine folder.  Linux (at least my XUbuntu) has ttyS0 - ttyS32.  Each USB serial device is added after that. 

Good news is that APRSIS32 "sees" all 33 (in my case) serial ports.  The bad news of course is that there is no guarantee of the USB order if you have more than 1 USB serial device.

Through investigation, I learned that udev rules can reallocate any of these com# device to a symlink device link other than an ttyS#, BUT WINE changes them back.  However, udev rule CAN override an existing device (with no hardware), that worked for me.  My desktop has 1 physical serial port on ttyS0 (com1), so I can reallocate any ttyS# with # > 0.  Just remember that COM# ports start with 1 and ttyS# devices start with 0 (zero), so my override of ttyS3 became com4.  A section of my udev rules file in /etc/udev/rules.d called 65-tnc.rules:

#65-tnc.rules
# TNC-X
# SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="tncx"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", SYMLINK+="ttyS3"

I have a line for each TNC device I connect, including some for Bluetooth connections, but I haven't tested those with WINE 5.0 yet.

Robert Giuliano
KB8RCO



On Saturday, May 2, 2020, 8:58:33 AM EDT, Michael Coslo via groups.io <mjc_n3li@...> wrote:


Hi Rob,

WINES’s handling of com ports flummoxed me. What used to be a simple symbolic link became something else indeed  ver 2.8 and later. The people at Codeweavers tried to help, but they had instructions for Mac, which were different enough that it didn’t work for me.

Needing my station up and running, I ended up removing Mint and reinstalling Windows 8.1, which is just too cruel! 8^)

When I’m not pressed for time, I’ll reinstall mint and try again.

But you might have the secret sauce for getting new versions of WINE to do the link?

Otherwise I might try again with an old version of WINE.

- 73 Mike N3LI -


> On May 2, 2020, at 12:56 AM, Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:
>
> Just upgraded my setup.  This includes latest XUbuntu (20.04) with WINE 5.0.
> Some features are new to me with the updated WINE version.
>
> APRSIS32 ran the normal update after clicking HELP.
> Other than connecting to my TNC (WINE changed COM port stuff), NO ISSUES here!
>
> I'll let it run now.
> Robert Giuliano
> KB8RCO
>
>
>
> On Friday, May 1, 2020, 10:02:06 PM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:
>
>
> I just pushed the subject version to development.  Please let me know if
> you successfully upgrade to this and if it initially looks ok.
>
> The only change since the last Development release is a spelling
> correction, changing the name for APRSISMO (check KJ4ERJ-12), and
> setting the new release timestamp.
>
> If this checks out, I'll push it to release sometime over the weekend.
>
> Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
>
> Here are the proposed release notes.  They will be posted in full to the
> Wiki.
>
> Here's the major features in version 2020/05/01 21:21
>
> Updated ToCall and Mic-E definitions from:
> http://www.aprs.org/aprs11/tocalls.txt as of 17 Apr 2020 (updated
> 2020/04/27)
> http://aprs.org/aprs12/mic-e-types.txt through 4 Jun 2019 (Updated
> 2020/04/27)
>
> No longer suppress gating messages just because a station was heard
> INSIDE a 3rd party packet on RF.  See notes about KO6TH from 2018/09/03
> 11:36
>
> Support "Common Talker IDs" from
> http://www.catb.org/gpsd/NMEA.html#_talker_ids. See notes from
> 2017/07/17 15:05
>
> Support Always-On-Top in right click menu in both main and MultiTrack
> windows (not on CE)
>
> Support proprietary 4 digit precision extension (!DAO!xx) in Configure /
> Beacon / Precision / 4 Digits
>
> Draw a small heading arrow near symbols that beacon speed and course
>
> Support a Syslog-type port for APRISMO diagnostic capture (Development
> mode only)
>
> Added Screen / Labels / Nicknames / Delete All (n)
> Also, if you try to define a new nickname that uses the same label as an
> existing nickname, the Accept button will disable until the Label is unique.
>
> There's a new Configure / Aliases / Accumulate feature to "learn" local
> digipeater aliases for actual hop counting.
> (Note: these are things like WIDE, RELAY as well as the State and
> Regional aliases (SSn-N))
> See: http://aprsisce.wikidot.com/menu:configure-aliases
>
> Show both Non-alias used hop count and Simplistic used hop count in the
> Digi/IGate column of the packet scroller.
>
> Filtered gating of packets from -IS to RF, but only in Development
> mode.  See notes from 2012/08/31 08:02 below.
>
> There's a bunch of updates to the View / Platform submenu population and
> counting sprinkled throughout.
>
> There's a new Configure / Companions option described in 2012/09/04
> 21:26, 2012/09/06 02:03, 02:51, 13:35
>
> Support MiniDump creation on a detected crash.  This may create
> APRSIS32.DMP files in your execution directory that will assist me in
> determining the cause of crashes.
> If APRSIS32 generates a .DMP/DMZ file, it will automatically restart.
> Eventually it'll even auto-detect the .DMPs and offer to send them to me.
>
> Support port type of "Dummy" (connection type doesn't matter) to be a
> Transmit-Only Dummy Load for testing -IS to RF IGating in an RF-less
> environment.
>
> Count "Oth" packets for any packet that doesn't fit a defined type.
> These are the packets that a type (t/) filter can't pick up from a
> filtered feed.  These packet counts are display on the port status
> windows (right click in APRS-IS OK pane).
>
> There's a new set of "Busy Stations" windows available on the APRS-IS OK
> right click menu.  Read about them in 2012/09/27 07:39 below.
>
> Support Screen / Brightness / Bright/Dim which changes the background of
> the transparent maps from White to Black. Discovered on APRSISDR.  (Adam
> KC2ANT)
>
> The NMEA port now supports a direct TCP/IP connection to GPSd. Simply
> configure the NMEA port to use TCP/IP and point it to your GPSd
> instance.  If you've never heard of GPSd, don't worry about it.  If
> you've got a GPSd already running, then I don't need to tell you more,
> right?  (Steve G6UIM)
>
> RF Ports now have a "NoGate ME" checkbox to disable gating your own
> generated packets to the -IS if copied on a digipeat.
>
> Added zoom number in center of slider (breaks if/when I do fractional
> zooms).  (Greg KB3KBR, Fred N7FMH)
> The zoom number turns green (it might be hard to read) when you're
> zoomed in close enough to "Move ME".  (Greg KB3KBR)
>
> Ignore single character !shriek!s (!x! being put out by N5ETC-2)
>
> Properly parse local time (/) format specifier (Jerry KF5AOK)
>
> New support for JS8Call and FT8 log-scraping objects.  This is similar
> to the JT65 scraper that already existed.  Simply create new object of
> the appropriate type and point it to your ALL.TXT log file for the
> corresponding program.  Object will be created for any detected station
> for which a grid square is available. These are objects local to your
> instance only.
>
> Support for "Hashes".  These are similar to !shriek!s, but are delimited
> by a single preceding #, as in #JS8 or #EVENT.  More details on this to
> follow at some later date.
> Note that only 32 unique Hashes are currently supported.  This limit
> will be removed before this support is finalized.
>
> KISS (aka AX.25) callsigns are now limited to A..Z and 0..9. Invalid
> characters are simply removed from the transmitted callsign, so beware!
>
>
>
>
>
>



Re: Proposed General Release (Dev: 2020/05/01 21:21)

Lynn Deffenbaugh
 

And when the details are determined, we can update the Wiki at:

http://aprsisce.wikidot.com/doc:linux

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/2/2020 8:58 AM, Michael Coslo via groups.io wrote:
Hi Rob,

WINES’s handling of com ports flummoxed me. What used to be a simple symbolic link became something else indeed ver 2.8 and later. The people at Codeweavers tried to help, but they had instructions for Mac, which were different enough that it didn’t work for me.

Needing my station up and running, I ended up removing Mint and reinstalling Windows 8.1, which is just too cruel! 8^)

When I’m not pressed for time, I’ll reinstall mint and try again.

But you might have the secret sauce for getting new versions of WINE to do the link?

Otherwise I might try again with an old version of WINE.

- 73 Mike N3LI -


On May 2, 2020, at 12:56 AM, Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:

Just upgraded my setup. This includes latest XUbuntu (20.04) with WINE 5.0.
Some features are new to me with the updated WINE version.

APRSIS32 ran the normal update after clicking HELP.
Other than connecting to my TNC (WINE changed COM port stuff), NO ISSUES here!

I'll let it run now.
Robert Giuliano
KB8RCO



On Friday, May 1, 2020, 10:02:06 PM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:


I just pushed the subject version to development. Please let me know if
you successfully upgrade to this and if it initially looks ok.

The only change since the last Development release is a spelling
correction, changing the name for APRSISMO (check KJ4ERJ-12), and
setting the new release timestamp.

If this checks out, I'll push it to release sometime over the weekend.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Here are the proposed release notes. They will be posted in full to the
Wiki.

Here's the major features in version 2020/05/01 21:21

Updated ToCall and Mic-E definitions from:
http://www.aprs.org/aprs11/tocalls.txt as of 17 Apr 2020 (updated
2020/04/27)
http://aprs.org/aprs12/mic-e-types.txt through 4 Jun 2019 (Updated
2020/04/27)

No longer suppress gating messages just because a station was heard
INSIDE a 3rd party packet on RF. See notes about KO6TH from 2018/09/03
11:36

Support "Common Talker IDs" from
http://www.catb.org/gpsd/NMEA.html#_talker_ids. See notes from
2017/07/17 15:05

Support Always-On-Top in right click menu in both main and MultiTrack
windows (not on CE)

Support proprietary 4 digit precision extension (!DAO!xx) in Configure /
Beacon / Precision / 4 Digits

Draw a small heading arrow near symbols that beacon speed and course

Support a Syslog-type port for APRISMO diagnostic capture (Development
mode only)

Added Screen / Labels / Nicknames / Delete All (n)
Also, if you try to define a new nickname that uses the same label as an
existing nickname, the Accept button will disable until the Label is unique.

There's a new Configure / Aliases / Accumulate feature to "learn" local
digipeater aliases for actual hop counting.
(Note: these are things like WIDE, RELAY as well as the State and
Regional aliases (SSn-N))
See: http://aprsisce.wikidot.com/menu:configure-aliases

Show both Non-alias used hop count and Simplistic used hop count in the
Digi/IGate column of the packet scroller.

Filtered gating of packets from -IS to RF, but only in Development
mode. See notes from 2012/08/31 08:02 below.

There's a bunch of updates to the View / Platform submenu population and
counting sprinkled throughout.

There's a new Configure / Companions option described in 2012/09/04
21:26, 2012/09/06 02:03, 02:51, 13:35

Support MiniDump creation on a detected crash. This may create
APRSIS32.DMP files in your execution directory that will assist me in
determining the cause of crashes.
If APRSIS32 generates a .DMP/DMZ file, it will automatically restart.
Eventually it'll even auto-detect the .DMPs and offer to send them to me.

Support port type of "Dummy" (connection type doesn't matter) to be a
Transmit-Only Dummy Load for testing -IS to RF IGating in an RF-less
environment.

Count "Oth" packets for any packet that doesn't fit a defined type.
These are the packets that a type (t/) filter can't pick up from a
filtered feed. These packet counts are display on the port status
windows (right click in APRS-IS OK pane).

There's a new set of "Busy Stations" windows available on the APRS-IS OK
right click menu. Read about them in 2012/09/27 07:39 below.

Support Screen / Brightness / Bright/Dim which changes the background of
the transparent maps from White to Black. Discovered on APRSISDR. (Adam
KC2ANT)

The NMEA port now supports a direct TCP/IP connection to GPSd. Simply
configure the NMEA port to use TCP/IP and point it to your GPSd
instance. If you've never heard of GPSd, don't worry about it. If
you've got a GPSd already running, then I don't need to tell you more,
right? (Steve G6UIM)

RF Ports now have a "NoGate ME" checkbox to disable gating your own
generated packets to the -IS if copied on a digipeat.

Added zoom number in center of slider (breaks if/when I do fractional
zooms). (Greg KB3KBR, Fred N7FMH)
The zoom number turns green (it might be hard to read) when you're
zoomed in close enough to "Move ME". (Greg KB3KBR)

Ignore single character !shriek!s (!x! being put out by N5ETC-2)

Properly parse local time (/) format specifier (Jerry KF5AOK)

New support for JS8Call and FT8 log-scraping objects. This is similar
to the JT65 scraper that already existed. Simply create new object of
the appropriate type and point it to your ALL.TXT log file for the
corresponding program. Object will be created for any detected station
for which a grid square is available. These are objects local to your
instance only.

Support for "Hashes". These are similar to !shriek!s, but are delimited
by a single preceding #, as in #JS8 or #EVENT. More details on this to
follow at some later date.
Note that only 32 unique Hashes are currently supported. This limit
will be removed before this support is finalized.

KISS (aka AX.25) callsigns are now limited to A..Z and 0..9. Invalid
characters are simply removed from the transmitted callsign, so beware!





Re: Proposed General Release (Dev: 2020/05/01 21:21)

Michael Coslo
 

Hi Rob,

WINES’s handling of com ports flummoxed me. What used to be a simple symbolic link became something else indeed ver 2.8 and later. The people at Codeweavers tried to help, but they had instructions for Mac, which were different enough that it didn’t work for me.

Needing my station up and running, I ended up removing Mint and reinstalling Windows 8.1, which is just too cruel! 8^)

When I’m not pressed for time, I’ll reinstall mint and try again.

But you might have the secret sauce for getting new versions of WINE to do the link?

Otherwise I might try again with an old version of WINE.

- 73 Mike N3LI -

On May 2, 2020, at 12:56 AM, Rob Giuliano via groups.io <kb8rco=yahoo.com@groups.io> wrote:

Just upgraded my setup. This includes latest XUbuntu (20.04) with WINE 5.0.
Some features are new to me with the updated WINE version.

APRSIS32 ran the normal update after clicking HELP.
Other than connecting to my TNC (WINE changed COM port stuff), NO ISSUES here!

I'll let it run now.
Robert Giuliano
KB8RCO



On Friday, May 1, 2020, 10:02:06 PM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:


I just pushed the subject version to development. Please let me know if
you successfully upgrade to this and if it initially looks ok.

The only change since the last Development release is a spelling
correction, changing the name for APRSISMO (check KJ4ERJ-12), and
setting the new release timestamp.

If this checks out, I'll push it to release sometime over the weekend.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Here are the proposed release notes. They will be posted in full to the
Wiki.

Here's the major features in version 2020/05/01 21:21

Updated ToCall and Mic-E definitions from:
http://www.aprs.org/aprs11/tocalls.txt as of 17 Apr 2020 (updated
2020/04/27)
http://aprs.org/aprs12/mic-e-types.txt through 4 Jun 2019 (Updated
2020/04/27)

No longer suppress gating messages just because a station was heard
INSIDE a 3rd party packet on RF. See notes about KO6TH from 2018/09/03
11:36

Support "Common Talker IDs" from
http://www.catb.org/gpsd/NMEA.html#_talker_ids. See notes from
2017/07/17 15:05

Support Always-On-Top in right click menu in both main and MultiTrack
windows (not on CE)

Support proprietary 4 digit precision extension (!DAO!xx) in Configure /
Beacon / Precision / 4 Digits

Draw a small heading arrow near symbols that beacon speed and course

Support a Syslog-type port for APRISMO diagnostic capture (Development
mode only)

Added Screen / Labels / Nicknames / Delete All (n)
Also, if you try to define a new nickname that uses the same label as an
existing nickname, the Accept button will disable until the Label is unique.

There's a new Configure / Aliases / Accumulate feature to "learn" local
digipeater aliases for actual hop counting.
(Note: these are things like WIDE, RELAY as well as the State and
Regional aliases (SSn-N))
See: http://aprsisce.wikidot.com/menu:configure-aliases

Show both Non-alias used hop count and Simplistic used hop count in the
Digi/IGate column of the packet scroller.

Filtered gating of packets from -IS to RF, but only in Development
mode. See notes from 2012/08/31 08:02 below.

There's a bunch of updates to the View / Platform submenu population and
counting sprinkled throughout.

There's a new Configure / Companions option described in 2012/09/04
21:26, 2012/09/06 02:03, 02:51, 13:35

Support MiniDump creation on a detected crash. This may create
APRSIS32.DMP files in your execution directory that will assist me in
determining the cause of crashes.
If APRSIS32 generates a .DMP/DMZ file, it will automatically restart.
Eventually it'll even auto-detect the .DMPs and offer to send them to me.

Support port type of "Dummy" (connection type doesn't matter) to be a
Transmit-Only Dummy Load for testing -IS to RF IGating in an RF-less
environment.

Count "Oth" packets for any packet that doesn't fit a defined type.
These are the packets that a type (t/) filter can't pick up from a
filtered feed. These packet counts are display on the port status
windows (right click in APRS-IS OK pane).

There's a new set of "Busy Stations" windows available on the APRS-IS OK
right click menu. Read about them in 2012/09/27 07:39 below.

Support Screen / Brightness / Bright/Dim which changes the background of
the transparent maps from White to Black. Discovered on APRSISDR. (Adam
KC2ANT)

The NMEA port now supports a direct TCP/IP connection to GPSd. Simply
configure the NMEA port to use TCP/IP and point it to your GPSd
instance. If you've never heard of GPSd, don't worry about it. If
you've got a GPSd already running, then I don't need to tell you more,
right? (Steve G6UIM)

RF Ports now have a "NoGate ME" checkbox to disable gating your own
generated packets to the -IS if copied on a digipeat.

Added zoom number in center of slider (breaks if/when I do fractional
zooms). (Greg KB3KBR, Fred N7FMH)
The zoom number turns green (it might be hard to read) when you're
zoomed in close enough to "Move ME". (Greg KB3KBR)

Ignore single character !shriek!s (!x! being put out by N5ETC-2)

Properly parse local time (/) format specifier (Jerry KF5AOK)

New support for JS8Call and FT8 log-scraping objects. This is similar
to the JT65 scraper that already existed. Simply create new object of
the appropriate type and point it to your ALL.TXT log file for the
corresponding program. Object will be created for any detected station
for which a grid square is available. These are objects local to your
instance only.

Support for "Hashes". These are similar to !shriek!s, but are delimited
by a single preceding #, as in #JS8 or #EVENT. More details on this to
follow at some later date.
Note that only 32 unique Hashes are currently supported. This limit
will be removed before this support is finalized.

KISS (aka AX.25) callsigns are now limited to A..Z and 0..9. Invalid
characters are simply removed from the transmitted callsign, so beware!





Re: Proposed General Release (Dev: 2020/05/01 21:21)

Michael Wright
 

I'll push it to release sometime over the weekend.
I completely lost track of all the emails lately. But then I appreciate all the work you and all the others contributing to APRS.

Mike K6MFW

Re: Proposed General Release (Dev: 2020/05/01 21:21)

KE6BB
 

Upgraded 3 computers and ran them for 2 or 3 hours with no problems.  One of them (KE6BB) will be on all night with wind advisory objects for the interstate 5 corridor north of Los Angeles, until 9am.

Mark,
KE6BB


-------- Original message --------
From: Lynn Deffenbaugh <kj4erj@...>
Date: 5/1/20 7:02 PM (GMT-08:00)
To: APRSISCE@groups.io
Subject: [APRSISCE] Proposed General Release (Dev: 2020/05/01 21:21)

I just pushed the subject version to development.  Please let me know if
you successfully upgrade to this and if it initially looks ok.

The only change since the last Development release is a spelling
correction, changing the name for APRSISMO (check KJ4ERJ-12), and
setting the new release timestamp.

If this checks out, I'll push it to release sometime over the weekend.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Here are the proposed release notes.  They will be posted in full to the
Wiki.

Here's the major features in version 2020/05/01 21:21

Updated ToCall and Mic-E definitions from:
http://www.aprs.org/aprs11/tocalls.txt as of 17 Apr 2020 (updated
2020/04/27)
http://aprs.org/aprs12/mic-e-types.txt through 4 Jun 2019 (Updated
2020/04/27)

No longer suppress gating messages just because a station was heard
INSIDE a 3rd party packet on RF.  See notes about KO6TH from 2018/09/03
11:36

Support "Common Talker IDs" from
http://www.catb.org/gpsd/NMEA.html#_talker_ids.  See notes from
2017/07/17 15:05

Support Always-On-Top in right click menu in both main and MultiTrack
windows (not on CE)

Support proprietary 4 digit precision extension (!DAO!xx) in Configure /
Beacon / Precision / 4 Digits

Draw a small heading arrow near symbols that beacon speed and course

Support a Syslog-type port for APRISMO diagnostic capture (Development
mode only)

Added Screen / Labels / Nicknames / Delete All (n)
Also, if you try to define a new nickname that uses the same label as an
existing nickname, the Accept button will disable until the Label is unique.

There's a new Configure / Aliases / Accumulate feature to "learn" local
digipeater aliases for actual hop counting.
(Note: these are things like WIDE, RELAY as well as the State and
Regional aliases (SSn-N))
See: http://aprsisce.wikidot.com/menu:configure-aliases

Show both Non-alias used hop count and Simplistic used hop count in the
Digi/IGate column of the packet scroller.

Filtered gating of packets from -IS to RF, but only in Development
mode.  See notes from 2012/08/31 08:02 below.

There's a bunch of updates to the View / Platform submenu population and
counting sprinkled throughout.

There's a new Configure / Companions option described in 2012/09/04
21:26, 2012/09/06 02:03, 02:51, 13:35

Support MiniDump creation on a detected crash.  This may create
APRSIS32.DMP files in your execution directory that will assist me in
determining the cause of crashes.
If APRSIS32 generates a .DMP/DMZ file, it will automatically restart. 
Eventually it'll even auto-detect the .DMPs and offer to send them to me.

Support port type of "Dummy" (connection type doesn't matter) to be a
Transmit-Only Dummy Load for testing -IS to RF IGating in an RF-less
environment.

Count "Oth" packets for any packet that doesn't fit a defined type. 
These are the packets that a type (t/) filter can't pick up from a
filtered feed.  These packet counts are display on the port status
windows (right click in APRS-IS OK pane).

There's a new set of "Busy Stations" windows available on the APRS-IS OK
right click menu.  Read about them in 2012/09/27 07:39 below.

Support Screen / Brightness / Bright/Dim which changes the background of
the transparent maps from White to Black. Discovered on APRSISDR.  (Adam
KC2ANT)

The NMEA port now supports a direct TCP/IP connection to GPSd. Simply
configure the NMEA port to use TCP/IP and point it to your GPSd
instance.  If you've never heard of GPSd, don't worry about it.  If
you've got a GPSd already running, then I don't need to tell you more,
right?  (Steve G6UIM)

RF Ports now have a "NoGate ME" checkbox to disable gating your own
generated packets to the -IS if copied on a digipeat.

Added zoom number in center of slider (breaks if/when I do fractional
zooms).  (Greg KB3KBR, Fred N7FMH)
The zoom number turns green (it might be hard to read) when you're
zoomed in close enough to "Move ME".  (Greg KB3KBR)

Ignore single character !shriek!s (!x! being put out by N5ETC-2)

Properly parse local time (/) format specifier (Jerry KF5AOK)

New support for JS8Call and FT8 log-scraping objects.  This is similar
to the JT65 scraper that already existed.  Simply create new object of
the appropriate type and point it to your ALL.TXT log file for the
corresponding program.  Object will be created for any detected station
for which a grid square is available. These are objects local to your
instance only.

Support for "Hashes".  These are similar to !shriek!s, but are delimited
by a single preceding #, as in #JS8 or #EVENT.  More details on this to
follow at some later date.
Note that only 32 unique Hashes are currently supported.  This limit
will be removed before this support is finalized.

KISS (aka AX.25) callsigns are now limited to A..Z and 0..9. Invalid
characters are simply removed from the transmitted callsign, so beware!





Re: Proposed General Release (Dev: 2020/05/01 21:21)

Rob Giuliano
 

Just upgraded my setup.  This includes latest XUbuntu (20.04) with WINE 5.0.
Some features are new to me with the updated WINE version.

APRSIS32 ran the normal update after clicking HELP.
Other than connecting to my TNC (WINE changed COM port stuff), NO ISSUES here!

I'll let it run now.

Robert Giuliano
KB8RCO



On Friday, May 1, 2020, 10:02:06 PM EDT, Lynn Deffenbaugh <kj4erj@...> wrote:


I just pushed the subject version to development.  Please let me know if
you successfully upgrade to this and if it initially looks ok.

The only change since the last Development release is a spelling
correction, changing the name for APRSISMO (check KJ4ERJ-12), and
setting the new release timestamp.

If this checks out, I'll push it to release sometime over the weekend.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Here are the proposed release notes.  They will be posted in full to the
Wiki.

Here's the major features in version 2020/05/01 21:21

Updated ToCall and Mic-E definitions from:
http://www.aprs.org/aprs11/tocalls.txt as of 17 Apr 2020 (updated
2020/04/27)
http://aprs.org/aprs12/mic-e-types.txt through 4 Jun 2019 (Updated
2020/04/27)

No longer suppress gating messages just because a station was heard
INSIDE a 3rd party packet on RF.  See notes about KO6TH from 2018/09/03
11:36

Support "Common Talker IDs" from
2017/07/17 15:05

Support Always-On-Top in right click menu in both main and MultiTrack
windows (not on CE)

Support proprietary 4 digit precision extension (!DAO!xx) in Configure /
Beacon / Precision / 4 Digits

Draw a small heading arrow near symbols that beacon speed and course

Support a Syslog-type port for APRISMO diagnostic capture (Development
mode only)

Added Screen / Labels / Nicknames / Delete All (n)
Also, if you try to define a new nickname that uses the same label as an
existing nickname, the Accept button will disable until the Label is unique.

There's a new Configure / Aliases / Accumulate feature to "learn" local
digipeater aliases for actual hop counting.
(Note: these are things like WIDE, RELAY as well as the State and
Regional aliases (SSn-N))

Show both Non-alias used hop count and Simplistic used hop count in the
Digi/IGate column of the packet scroller.

Filtered gating of packets from -IS to RF, but only in Development
mode.  See notes from 2012/08/31 08:02 below.

There's a bunch of updates to the View / Platform submenu population and
counting sprinkled throughout.

There's a new Configure / Companions option described in 2012/09/04
21:26, 2012/09/06 02:03, 02:51, 13:35

Support MiniDump creation on a detected crash.  This may create
APRSIS32.DMP files in your execution directory that will assist me in
determining the cause of crashes.
If APRSIS32 generates a .DMP/DMZ file, it will automatically restart. 
Eventually it'll even auto-detect the .DMPs and offer to send them to me.

Support port type of "Dummy" (connection type doesn't matter) to be a
Transmit-Only Dummy Load for testing -IS to RF IGating in an RF-less
environment.

Count "Oth" packets for any packet that doesn't fit a defined type. 
These are the packets that a type (t/) filter can't pick up from a
filtered feed.  These packet counts are display on the port status
windows (right click in APRS-IS OK pane).

There's a new set of "Busy Stations" windows available on the APRS-IS OK
right click menu.  Read about them in 2012/09/27 07:39 below.

Support Screen / Brightness / Bright/Dim which changes the background of
the transparent maps from White to Black. Discovered on APRSISDR.  (Adam
KC2ANT)

The NMEA port now supports a direct TCP/IP connection to GPSd. Simply
configure the NMEA port to use TCP/IP and point it to your GPSd
instance.  If you've never heard of GPSd, don't worry about it.  If
you've got a GPSd already running, then I don't need to tell you more,
right?  (Steve G6UIM)

RF Ports now have a "NoGate ME" checkbox to disable gating your own
generated packets to the -IS if copied on a digipeat.

Added zoom number in center of slider (breaks if/when I do fractional
zooms).  (Greg KB3KBR, Fred N7FMH)
The zoom number turns green (it might be hard to read) when you're
zoomed in close enough to "Move ME".  (Greg KB3KBR)

Ignore single character !shriek!s (!x! being put out by N5ETC-2)

Properly parse local time (/) format specifier (Jerry KF5AOK)

New support for JS8Call and FT8 log-scraping objects.  This is similar
to the JT65 scraper that already existed.  Simply create new object of
the appropriate type and point it to your ALL.TXT log file for the
corresponding program.  Object will be created for any detected station
for which a grid square is available. These are objects local to your
instance only.

Support for "Hashes".  These are similar to !shriek!s, but are delimited
by a single preceding #, as in #JS8 or #EVENT.  More details on this to
follow at some later date.
Note that only 32 unique Hashes are currently supported.  This limit
will be removed before this support is finalized.

KISS (aka AX.25) callsigns are now limited to A..Z and 0..9. Invalid
characters are simply removed from the transmitted callsign, so beware!





Proposed General Release (Dev: 2020/05/01 21:21)

Lynn Deffenbaugh
 

I just pushed the subject version to development.  Please let me know if you successfully upgrade to this and if it initially looks ok.

The only change since the last Development release is a spelling correction, changing the name for APRSISMO (check KJ4ERJ-12), and setting the new release timestamp.

If this checks out, I'll push it to release sometime over the weekend.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

Here are the proposed release notes.  They will be posted in full to the Wiki.

Here's the major features in version 2020/05/01 21:21

Updated ToCall and Mic-E definitions from:
http://www.aprs.org/aprs11/tocalls.txt as of 17 Apr 2020 (updated 2020/04/27)
http://aprs.org/aprs12/mic-e-types.txt through 4 Jun 2019 (Updated 2020/04/27)

No longer suppress gating messages just because a station was heard INSIDE a 3rd party packet on RF.  See notes about KO6TH from 2018/09/03 11:36

Support "Common Talker IDs" from http://www.catb.org/gpsd/NMEA.html#_talker_ids.  See notes from 2017/07/17 15:05

Support Always-On-Top in right click menu in both main and MultiTrack windows (not on CE)

Support proprietary 4 digit precision extension (!DAO!xx) in Configure / Beacon / Precision / 4 Digits

Draw a small heading arrow near symbols that beacon speed and course

Support a Syslog-type port for APRISMO diagnostic capture (Development mode only)

Added Screen / Labels / Nicknames / Delete All (n)
Also, if you try to define a new nickname that uses the same label as an
existing nickname, the Accept button will disable until the Label is unique.

There's a new Configure / Aliases / Accumulate feature to "learn" local digipeater aliases for actual hop counting.
(Note: these are things like WIDE, RELAY as well as the State and Regional aliases (SSn-N))
See: http://aprsisce.wikidot.com/menu:configure-aliases

Show both Non-alias used hop count and Simplistic used hop count in the Digi/IGate column of the packet scroller.

Filtered gating of packets from -IS to RF, but only in Development mode.  See notes from 2012/08/31 08:02 below.

There's a bunch of updates to the View / Platform submenu population and counting sprinkled throughout.

There's a new Configure / Companions option described in 2012/09/04 21:26, 2012/09/06 02:03, 02:51, 13:35

Support MiniDump creation on a detected crash.  This may create APRSIS32.DMP files in your execution directory that will assist me in determining the cause of crashes.
If APRSIS32 generates a .DMP/DMZ file, it will automatically restart.  Eventually it'll even auto-detect the .DMPs and offer to send them to me.

Support port type of "Dummy" (connection type doesn't matter) to be a Transmit-Only Dummy Load for testing -IS to RF IGating in an RF-less environment.

Count "Oth" packets for any packet that doesn't fit a defined type.  These are the packets that a type (t/) filter can't pick up from a filtered feed.  These packet counts are display on the port status windows (right click in APRS-IS OK pane).

There's a new set of "Busy Stations" windows available on the APRS-IS OK right click menu.  Read about them in 2012/09/27 07:39 below.

Support Screen / Brightness / Bright/Dim which changes the background of the transparent maps from White to Black. Discovered on APRSISDR.  (Adam KC2ANT)

The NMEA port now supports a direct TCP/IP connection to GPSd. Simply configure the NMEA port to use TCP/IP and point it to your GPSd instance.  If you've never heard of GPSd, don't worry about it.  If you've got a GPSd already running, then I don't need to tell you more, right?  (Steve G6UIM)

RF Ports now have a "NoGate ME" checkbox to disable gating your own generated packets to the -IS if copied on a digipeat.

Added zoom number in center of slider (breaks if/when I do fractional zooms).  (Greg KB3KBR, Fred N7FMH)
The zoom number turns green (it might be hard to read) when you're zoomed in close enough to "Move ME".  (Greg KB3KBR)

Ignore single character !shriek!s (!x! being put out by N5ETC-2)

Properly parse local time (/) format specifier (Jerry KF5AOK)

New support for JS8Call and FT8 log-scraping objects.  This is similar to the JT65 scraper that already existed.  Simply create new object of the appropriate type and point it to your ALL.TXT log file for the corresponding program.  Object will be created for any detected station for which a grid square is available. These are objects local to your instance only.

Support for "Hashes".  These are similar to !shriek!s, but are delimited by a single preceding #, as in #JS8 or #EVENT.  More details on this to follow at some later date.
Note that only 32 unique Hashes are currently supported.  This limit will be removed before this support is finalized.

KISS (aka AX.25) callsigns are now limited to A..Z and 0..9. Invalid characters are simply removed from the transmitted callsign, so beware!

Re: Earthquakes

Lynn Deffenbaugh
 

s//Q is the proper symbol.  I added that to my filter and haven't gotten flooded with BrandMeister but DO have quakes showing up.  A quick test filer shows the following source of earthquake symbols as well:

WinMain:2020-05-01T22:38:42.099 IS[Firenet](Hit(s//Q)) [1]YM2UDM>APNU19,QUAKE7-7,qAR,TA1KC:;012126-01*012126z3423.12N\02522.78EQM=3.2 AKDENIZ GIRIT ADASI ACIKLARI
WinMain:2020-05-01T22:39:17.201 IS[Firenet](Hit(s//Q)) [1]YM2UDM>APNU19,QUAKE7-7,qAR,TA1OSN:;011101-01*011101z4212.95N\02451.84EQM=4.6 BULGARISTAN
WinMain:2020-05-01T22:40:00.412 IS[Firenet](Hit(s//Q)) [1]YM2UDM>APNU19,QUAKE7-7,qAR,TA1OSN:;012126-01*012126z3423.12N\02522.78EQM=3.2 AKDENIZ GIRIT ADASI ACIKLARI

Interesting that they also show up on the APRS-IS, so YM2UDM must be injecting them into the main network.  Or not using the "firenet-only" port on a firenet server.

Checking these object locations puts them around the Mediterranean.

See http://www.aprs.org/symbols/symbols.txt and http://www.aprs.org/symbols/symbols-new.txt for name-searchable lists of symbols.  Or http://www.aprs.org/symbols.html for a more verbose description.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/1/2020 5:45 PM, Fred Hillhouse Jr (CruelShoes) wrote:
I think \Q is the default symbol for BrandMeister.

Fred N7FMH 

On Fri, May 1, 2020, 5:20 PM Lynn Deffenbaugh <kj4erj@...> wrote:

Ok, if you have Lightning already displayed, that means you're connected to firenet.  So the only thing you need to add is s//Q which is the symbol for Earthquakes.  This gets appended to your Config / General / Additional Filter setting.  The s is a symbol filter, the nothing between the two slashes means nothing selected from the primary symbol table and the final Q is the earthquake symbol from the alternate table.

Living on the sand in Florida, it's been a long time since I was curious about the earthquakes!  Maybe I'll add it to my test APRSISMO instance which is drawing from firenet and is otherwise (relatively) uncluttered.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 5/1/2020 4:13 PM, Al Massaro wrote:
Lightning I have displaying (when we get it), earthquakes I am very interested. How? Where to find the setup info?
AL M
KF5SMH