|
Re: It Works GREAT!
Hi Joe,
As already answered by others 10.1476 MHz USB.
I am using a dipole only about 15 feet of the ground,
Receiving mobile stations about 1000 miles to the North of Tasmania.
Have fun
Regards
Peter
VK7KPC-10 on APRS.fi
From: Joe nss@... [aprsisce]
Sent: Tuesday, August 13, 2019 10:30 AM
To: aprsisce@...
Subject: Re: [aprsisce] It Works GREAT! I'd like to listen there. On 8/12/2019 4:54 PM, dodd.pc@... [aprsisce]
wrote:
|
|
|
|
Re: It Works GREAT!
Set your HF radio dial to 10.147.60, USB mode. Set SoundModem to 300 baud AFSK, centered at 1700hz. Also, there's VERY active conventional HF packet on dial freq 14.105.00 in LSB mode, and dial freq 7.109.50 LSB mode. Same 300-baud AFSK at 1700hz.
On Monday, August 12, 2019, 9:11:46 PM EDT, Joe nss@... [aprsisce] wrote:
I'd like to listen there. The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com On 8/12/2019 4:54 PM,
dodd.pc@... [aprsisce] wrote:
|
|
|
|
Re: Unable to deliver your message
Rob Giuliano
I suggest reading HF APRS Notes
On Monday, August 12, 2019, 9:11:39 PM EDT, Joe nss@mwt..net [aprsisce] wrote:
I'd like to listen there. The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com On 8/12/2019 4:54 PM,
dodd.pc@... [aprsisce] wrote:
|
|
|
|
Re: It Works GREAT!
Lynn Deffenbaugh
If you double-click that narrow vertical bar, it will give you the raw numbers. The level of the bar and the colors are a red-herring based on a much earlier version of APRSISCE/32 that actually had a limited station count capability. It would grow the bar as more stations became known and eventually turn red as it neared the top. That is still the behavior, but when the current station list size is hit, the size is expanded resulting in the bar going back down into the yellow (orange) or green. So, the bar really exists now only to be a double-click target to get at the detailed station count and configured age information. Specifically: Close Stations That whole bottom part about memory is
primarily for my use when debugging memory consumption (and
potential leak) issues.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 8/12/2019 5:47 PM, Joe nss@...
[aprsisce] wrote:
I guess it is Station Count,
|
|
|
|
Re: It Works GREAT!
Rob Giuliano
I suggest reading http://wa8lmf.net/aprs/HF_APRS_Notes.htm He has a section on HF APRS and specifics on 30, Any search of "APRS 30m band" should give some helpful sites. Robert Giuliano
On Monday, August 12, 2019, 9:11:39 PM EDT, Joe nss@... [aprsisce] wrote:
I'd like to listen there. The Original Rolling Ball Clock Idle Tyme Idle-Tyme.com http://www.idle-tyme.com On 8/12/2019 4:54 PM,
dodd.pc@... [aprsisce] wrote:
|
|
|
|
Re: Sorry for this Test
Joe WB9SBD
nO IT IS A MESS ISSUE i HAVE
WITH every yAHOO PAGE, i DESCRIBE BELOW,,
toggle quoted messageShow quoted text
Yahoo has been all messed up for me for geez ten years? When I go to a page like this it wants me to log in. I try to but it complains that the password does not match. So I try to do the help with password thing, to retrieve password. and I give it the info, and it tells me there is no such user using that E-Mail address. OK so I try to make a whole new account, and put in that exact same E-Mail address, and guess what? It tells me I can not use that E-Mail address because it is already in use. No such user, and already in use at the same time. so every group I do has been strictly via E-Mail. I was hoping to be able to read some of the already posts, to maybe get my questions answered there, but cant get in, so I guess I will have to ask Via the E-Mail even tho the question may have been just answered yesterday he he he Joe WB9SBD
On 8/12/2019 5:12 PM, ARNOLD HARDING
kq6di@... [aprsisce] wrote:
|
|
|
|
Re: It Works GREAT!
Joe WB9SBD
I'd like to listen there.
toggle quoted messageShow quoted text
what frequency and what mode or settings? Joe WB9SBD
On 8/12/2019 4:54 PM,
dodd.pc@... [aprsisce] wrote:
|
|
|
|
Re: Something mis-configured?
Christopher Rose
Screen capture Print screen Open paint and click the box for edit and then right click paste on the white area? Or open a word processor and see if you can paste the image and then save it. Now attach it to it email? Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message -------- From: "David Shrum dave.n8pu@... [aprsisce]" <aprsisce@...> Date: 8/5/19 2:36 PM (GMT-05:00) To: aprsisce@... Subject: Re: [aprsisce] Something mis-configured? Since I'm near Traverse City, yes that is what I want to do, Thanks. Dave N8PU
|
|
|
|
Re: Sorry for this Test
Christopher Rose
My ISP web email won't let me see messages from this list. Have to use microsoft mail client to read the messages. Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message -------- From: "ARNOLD HARDING kq6di@... [aprsisce]" <aprsisce@...> Date: 8/12/19 6:12 PM (GMT-05:00) To: aprsisce@... Subject: Re: [aprsisce] Sorry for this Test
Joe, Could the "problem" with the website be that it is not "secure"? The website is fine for me, but it does not show a secure connection. Arnold, KQ6DI On August 11, 2019 at 4:36 PM "Joe nss@... [aprsisce]" <aprsisce@...> wrote:
|
|
|
|
Re: Sorry for this Test
Arnold Harding - KQ6DI
Joe, Could the "problem" with the website be that it is not "secure"? The website is fine for me, but it does not show a secure connection. Arnold, KQ6DI
On August 11, 2019 at 4:36 PM "Joe nss@... [aprsisce]" <aprsisce@...> wrote:
|
|
|
|
Re: It Works GREAT!
Hi Robert
Thanks for that link.
I am also using the soundcard modem with aprsisce on 30m.
Peter Dodd
VK7KPC-10
From: Rob Giuliano kb8rco@... [aprsisce]
Sent: Tuesday, August 13, 2019 7:30 AM
To: Joe nss@... [aprsisce]
Subject: Re: [aprsisce] It Works GREAT!
Glad you got it working!
Check out the wiki: http://aprsisce.wikidot.com/doc:screen-elements
It explains the elements you are looking at.
Robert
Giuliano
|
|
|
|
Re: It Works GREAT!
Joe WB9SBD
I guess it is Station Count,
toggle quoted messageShow quoted text
But do not understand what it is telling me. when I first open it it is RED and full scale, and as time goes on even tho the station list on the left gets huge this bar drops turns orange and eventually green. Joe WB9SBD
On 8/12/2019 4:30 PM, Rob Giuliano
kb8rco@... [aprsisce] wrote:
|
|
|
|
Re: It Works GREAT! [1 Attachment]
Rob Giuliano
Glad you got it working! Check out the wiki: http://aprsisce.wikidot.com/doc:screen-elements It explains the elements you are looking at. Robert Giuliano
On Monday, August 12, 2019, 3:42:20 PM EDT, Joe nss@... [aprsisce] wrote:
[Attachment(s) from Joe included below]
APRSISCE and soundmodem
together works GREAT! Thank You all for the help. --
|
|
|
|
Re: It Works GREAT! [1 Attachment]
Joe WB9SBD
Mine looks different and on
that side only one bar visible. The higher it goes it gets
redder the lower less red orange and I think green?
toggle quoted messageShow quoted text
Joe
On 8/12/2019 3:22 PM, 'Lynn W
Deffenbaugh (Mr)' kj4erj@... [aprsisce] wrote:
|
|
|
|
Re: It Works GREAT! [1 Attachment]
Lynn Deffenbaugh
http://aprsisce.wikidot.com/doc:screen-elements I believe you're asking about either 18 or 19. The one closer to
the map gives you station count and age configuration information
and the one to the outside right gives you battery status. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 8/12/2019 2:44 PM, Joe nss@...
[aprsisce] wrote:
APRSISCE and soundmodem together works GREAT! Thank You all for the help.
|
|
|
|
It Works GREAT!
Joe WB9SBD
APRSISCE and soundmodem
together works GREAT! Thank You all for the help.
One question, the vertical bar in the left it's obvious what it is showing, but the one on the right, what is it's purpose? Joe WB9SBD
|
|
|
|
Re: APRS
Rob Giuliano
Even though you got confused, I'd still look at DireWolf. Ask questions on here and/or on their support group. From my experience, both have good support. In the APRSis32 menu choose >Configure >Ports >New Port ... In the popup: For >Type (combo box) choose AGW Name it what you like (say maybe 'DireWolf') Next popup is port type: TCP/IP Next popup is TCP configuration: localhost (if on the same computer, or you will have to give an IP or hostname) Port: 8000 For the DireWolf side, the biggest issue is the sound card identification. I typically run DireWolf to see the options (they are numbered). Then close direwolf and open direwolf.conf Change the ADEVICE # # to match your computer (input # then Output #) ACHANNELS 1 for mono mic input MYCALL You should be able to leave everything else as the defaults. NOTE: scroll down and make sure AGWPORT 8000 is not commented out If you have issues, post again, put include the DireWolf version and maybe the response from DireWolf on your sound card(s). Robert Giuliano KB8RCO
On Sunday, August 11, 2019, 10:48:14 PM EDT, Joe nss@... [aprsisce] wrote:
hi Robert, On 8/11/2019 9:42 PM, Rob Giuliano
kb8rco@... [aprsisce] wrote:
|
|
|
|
Re: APRS
Joe WB9SBD
hi Robert,
toggle quoted messageShow quoted text
Working on it. I got literally dozens of HT's and other rigs to use for listening, so that is not an issue. and yes just want to listen for now. Joe WB9SBD
On 8/11/2019 9:42 PM, Rob Giuliano
kb8rco@... [aprsisce] wrote:
|
|
|
|
Re: APRS
Rob Giuliano
Both Lynn and Jeff have provided sound card modem programs and Jeff gave instructions on the APRSIS32 port type. I will add: You mention "monitoring" APRS, so if you are looking at receive only, A
simple RTL2832U Software Defined Radio dongle will work great for the
radio receiver, but as an IGATE, it is recommended that your station have TX capability. To add TX: If your radio does not have VOX, you will need a PTT circuit in order to get you radio to transmit. There are many options, but search the internet to see what those many options are, and find one that you can use. Robert Giuliano
On Sunday, August 11, 2019, 9:01:46 PM EDT, Joe nss@... [aprsisce] wrote:
Hello Everyone, What I am about to ask below, if it has recently been asked and answered, please accept my apology. I have zero access to the web page with all the old messages and I just joined this afternoon. I'm getting back into APRS after a long absence. And I was talking to a guy that still does it and I asked him this. APRS, with modern computers and all the fancy stuff you see they can do now. Is there a way to monitor APRS with just a computer and soundcard? I mean what can be in a old vintage 1980's TNC that can not be done with a computer program and soundcard instead? And he sent me to this program.. I installed it and got it up and running. I even saw my Home computer on aprs.fi, so it's working. NOW,,, If I have audio from 144.39 how do I put it into this program? Joe WB9SBD ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo Groups is subject to:
|
|
|
|
Re: APRS
Joe WB9SBD
I tried DireWolf, but was
quickly confused.
toggle quoted messageShow quoted text
Joe WB9SBD
On 8/11/2019 8:33 PM, 'Lynn W
Deffenbaugh (Mr)' kj4erj@... [aprsisce] wrote:
Take a look at DireWolf. It's a sound-card TNC to which APRSISCE/32 can connect. https://github.com/wb2osz/direwolf Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 On 8/11/2019 9:00 PM, Joe nss@... [aprsisce] wrote:Hello Everyone, What I am about to ask below, if it has recently been asked and answered, please accept my apology. I have zero access to the web page with all the old messages and I just joined this afternoon. I'm getting back into APRS after a long absence. And I was talking to a guy that still does it and I asked him this. APRS, with modern computers and all the fancy stuff you see they can do now. Is there a way to monitor APRS with just a computer and soundcard? I mean what can be in a old vintage 1980's TNC that can not be done with a computer program and soundcard instead? And he sent me to this program.. I installed it and got it up and running. I even saw my Home computer on aprs.fi, so it's working. NOW,,, If I have audio from 144.39 how do I put it into this program? Joe WB9SBD ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links
|
|
|
