|
Re: PK-232
Lynn Deffenbaugh
Ok, that trace log shows that a KISS packet was sent to the port
asking it to be transmitted. If it didn't transmit, then either
your TNC isn't wired to the radio properly or it isn't in KISS mode
or the baud rate is wrong.
toggle quoted messageShow quoted text
Are you receiving packets from the RF port? You can tell this in multiple ways: 1) Packets in the scroller show up with * on them 2) Double-clicking the narrow vertical bar just to the right of the map shows RF-heard counts 3) View / None followed by View / RF / All shows stations (besides ME) on the map. As for the "Move ME to center", that will not appear if you are already centered on ME. But even saying "No" to that will still transmit your currently known location which it seems to have done. Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 3/15/2017 7:40 PM, Tom T tmtlu3@... [aprsisce] wrote:
|
||
|
|
||
|
Re: PK-232
Thomas Testa
Port(1):2017-03-15T23:33:08.263 Sent[77]:b`d@`b@bd@c<03 F0>@233308h4032.51N/07410.18WlAPRS-IS for Win32 Transmit Log
On Wednesday, March 15, 2017 7:09 PM, "'Lynn W Deffenbaugh (Mr)' kj4erj@... [aprsisce]" wrote:
Enables / Logging / Port(<YourPortName>) and enable that trace
log. Then hit Transmit and see what if anything shows up in the
trace log. If nothing shows there, then Enables / Logging / Transmit and enable that one. Then hit Transmit again and see what it says there. Copy/Paste the output here and we'll see where to go from there. What is the callsign-SSID of the station in question? Are you seeing OK in the status pane? Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
|
||
|
|
||
|
Re: PK-232
Thomas Testa
My call is N2UFM ID...9622 PORT LOG Port(1):2017-03-15T23:33:08.263 Sent[77]:b`d@`b@bd@c<03 F0>@233308h4032.51N/07410.18WlAPRS-IS for Win32 When I hit transmit a popup comes to the middle of the screen saying MOVE NE TO MIDLE OF THE SCREEN
On Wednesday, March 15, 2017 7:09 PM, "'Lynn W Deffenbaugh (Mr)' kj4erj@... [aprsisce]" wrote:
Enables / Logging / Port() and enable that trace
log. Then hit Transmit and see what if anything shows up in the
trace log. If nothing shows there, then Enables / Logging / Transmit and enable that one. Then hit Transmit again and see what it says there. Copy/Paste the output here and we'll see where to go from there. What is the callsign-SSID of the station in question? Are you seeing OK in the status pane? Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
|
||
|
|
||
|
Re: PK-232
Lynn Deffenbaugh
Enables / Logging / Port() and enable that trace
log. Then hit Transmit and see what if anything shows up in the
trace log.
toggle quoted messageShow quoted text
If nothing shows there, then Enables / Logging / Transmit and enable that one. Then hit Transmit again and see what it says there. Copy/Paste the output here and we'll see where to go from there. What is the callsign-SSID of the station in question? Are you seeing OK in the status pane? Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 3/15/2017 6:45 PM, Tom T tmtlu3@... [aprsisce] wrote:
|
||
|
|
||
|
Re: PK-232
Thomas Testa
Thank you for you help Lynn. I went to that link and I have everything set the correct way. It just seams too me that the program is not sending any commands to the TNCat all. TNX, Tom....N2UFM
On Wednesday, March 15, 2017 4:53 PM, "'Lynn W Deffenbaugh (Mr)' kj4erj@... [aprsisce]" wrote:
Please also read: http://aprsisce.wikidot.com/doc:transmitting Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
|
||
|
|
||
|
Re: PK-232
Thomas Testa
Hi Marc I am running a FT-847
On Wednesday, March 15, 2017 4:48 PM, "Mark rv6amark@... [aprsisce]" wrote: What radio is it connected to? Mark KE6BB -------- Original message -------- From: "tmtlu3@... [aprsisce]" Date: 3/15/17 1:36 PM (GMT-08:00) To: aprsisce@... Subject: [aprsisce] PK-232 Hi I am new too APRSIS and I am having trouble getting the program to key my radio. I am using a PK-232 TNC. I have the com port parameters set correctly. It is in KISS MODE. If anyone has had the same problem I would appreciate some advice on how too correct this. TNX Tom.....N2UFM
|
||
|
|
||
|
Re: PK-232
Lynn Deffenbaugh
Please also read: http://aprsisce.wikidot.com/doc:transmitting
toggle quoted messageShow quoted text
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 3/15/2017 4:36 PM, tmtlu3@... [aprsisce] wrote:
|
||
|
|
||
|
Re: PK-232
What radio is it connected to?
toggle quoted messageShow quoted text
Mark KE6BB
-------- Original message -------- From: "tmtlu3@... [aprsisce]" <aprsisce@...> Date: 3/15/17 1:36 PM (GMT-08:00) To: aprsisce@... Subject: [aprsisce] PK-232 Hi I am new too APRSIS and I am having trouble getting the program to key my radio. I am using a PK-232 TNC. I have the com port parameters set correctly. It is in KISS MODE. If anyone has had the same problem I would appreciate some advice on how too correct this. TNX Tom.....N2UFM
|
||
|
|
||
|
PK-232
Thomas Testa
Hi I am new too APRSIS and I am having trouble getting the program to key my radio. I am using a PK-232 TNC. I have the com port parameters set correctly. It is in KISS MODE. If anyone has had the same problem I would appreciate some advice on how too correct this. TNX Tom.....N2UFM
|
||
|
|
||
|
Re: Password
Barrie Courtenay
Yes thanks Fred, you right there, I have been trying to unsubscribe for about 3 months now and still the emails keep coming in ☹️☹️ Regards Baz g7ufi
On 15 Mar 2017, at 15:23, 'Fred Hillhouse' fmhillhouse@... [aprsisce] <aprsisce@...> wrote:
|
||
|
|
||
|
Re: Password
Fred Hillhouse
Be prepared for more emails though. Yahoo has been slow at removing users from groups they unsubscribe from. If you first change to “digest”, then “unsubscribe”. That seems to be a reasonable path.
Best regards, Fred N7FMH
From: aprsisce@... [mailto:aprsisce@...]
Sent: Wednesday, March 15, 2017 9:31 AM To: aprsisce@... Subject: Re: [aprsisce] Password
As it says at the bottom of every message, if you can send a message to the group, you can send an e-mail to unsubscribe yourself. No password needed. <*> To unsubscribe from this group, send an email to:aprsisce-unsubscribe@...
I really need to leave this group. It I no longer remember my password and also can no longer use YAHOO. So you could you please delete me from group asap and no longer send me emailsRegards Barrie g7ufiBaz------------------------------------Posted by: Barrie Courtenay------------------------------------------------------------------------Yahoo Groups Links<*> To visit your group on the web, go to:http://groups.yahoo.com/group/aprsisce/<*> Your email settings:Individual Email | Traditional<*> To change settings online go to:http://groups.yahoo.com/group/aprsisce/join(Yahoo! ID required)<*> To change settings via email:aprsisce-digest@...aprsisce-fullfeatured@...<*> To unsubscribe from this group, send an email to:aprsisce-unsubscribe@...<*> Your use of Yahoo Groups is subject to:https://info.yahoo.com/legal/us/yahoo/utos/terms/
|
||
|
|
||
|
Re: Password
Lynn Deffenbaugh
As it says at the bottom of every message, if you can send a message
to the group, you can send an e-mail to unsubscribe yourself. No
password needed.
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32 I really need to leave this group. It I no longer remember my password and also can no longer use YAHOO. So you could you please delete me from group asap and no longer send me emails Regards Barrie g7ufi Baz ------------------------------------ Posted by: Barrie Courtenay ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/aprsisce/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/aprsisce/join (Yahoo! ID required) <*> To change settings via email: aprsisce-digest@... aprsisce-fullfeatured@... <*> To unsubscribe from this group, send an email to: aprsisce-unsubscribe@... <*> Your use of Yahoo Groups is subject to: https://info.yahoo.com/legal/us/yahoo/utos/terms/
|
||
|
|
||
|
Password
Barrie Courtenay
I really need to leave this group. It I no longer remember my password and also can no longer use YAHOO. So you could you please delete me from group asap and no longer send me emails
Regards Barrie g7ufi Baz
|
||
|
|
||
|
Re: igate
Rob Giuliano
There is a lot of information here: Robert Giuliano KB8RCO
From: "Greg Andal captgrega@... [aprsisce]" To: "aprsisce@..." Sent: Tuesday, March 14, 2017 8:07 PM Subject: [aprsisce] igate I'm trying to setup an igate using a kenwood tm d-710 .Not able to get to work could someone give me a few pointers. Thanks Greg.
|
||
|
|
||
|
Re: APRSISCE PASS CODE
Steve
what goes on the internet tends too stay on the internet, my eyes are still on the glass! 88 Steve, KF6WAX
On Tue, Mar 14, 2017 at 7:32 PM, JoAnn Donaldson joannplano2005@... [aprsisce] <aprsisce@...> wrote:
|
||
|
|
||
|
Re: APRSISCE PASS CODE
JoAnn Donaldson
It seems to me that everyone is NOT addressing the elephant in the room and that is amateurs will get frustrated when they do not hear back promptly and will then go looking for a way to work around the problem. If you really want to keep it solely in the hands of the Authors then I would contact the person or persons that are providing a work around to stop providing the work around, JoAnn Donaldson AB9YZ
On Tuesday, March 14, 2017 12:59 PM, "Steve kf6wax@... [aprsisce]" wrote: As a moderator I have eyes on glass from about 5AM Pacific time until late evening, I for one do not leave requests that have been made overnight. If a request has been made incorrectly I usually email straight back for the required info as I am sure do the other moderators. Yahoo Groups does have issues from time to time, but I strongly suspect that most Passcodes not received have actually ended up in the requester's spam box! As I have already found out that some on this list do not understand, sent in a plain brown wrapper or sent offlist, I will further explain that eyes on glass is my PC monitor and not an egg timer. Thank you for your kind understanding, On Tue, Mar 14, 2017 at 10:24 AM, 'Michael Wright' mfwright@... [aprsisce] <aprsisce@...> wrote:
|
||
|
|
||
|
Re: Aprs fi beacon
Matthew Esposito
Make sense now thanks for the quick reply!!
toggle quoted messageShow quoted text
Matthew R. Esposito
On Mar 15, 2017, at 10:19 AM, 'Lynn W Deffenbaugh (Mr)' kj4erj@... [aprsisce] <aprsisce@...> wrote:
|
||
|
|
||
|
Re: Aprs fi beacon
Arnold Harding - KQ6DI
The iPhone aprs.fi app does not send the data to any of the APRS servers except aprs.fi. I understand that is a plan, but not yet. Arnold KQ6DI
From: "Matthew Esposito matthewr.esposito@... [aprsisce]" To: "aprsisce" Sent: Tuesday, March 14, 2017 4:43:54 PM Subject: [aprsisce] Aprs fi beacon Iv been playing around with google aprs and aprs fi on my iPhone and I can't seem to get the aprs fi beacon to show up on aprsisce. And suggestions would be great
|
||
|
|
||
|
Re: Aprs fi beacon
Lynn Deffenbaugh
The aprs.fi iPhone app is just what it says it is, an aprs.fi application. Beacons from it only show up on the aprs.fi but NOT on the APRS-IS proper. You'll only see users of this app on the aprs.fi web site.
toggle quoted messageShow quoted text
Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32
On 3/14/2017 7:43 PM, Matthew Esposito matthewr.esposito@... [aprsisce] wrote:
Iv been playing around with google aprs and aprs fi on my iPhone and I can't seem to get the aprs fi beacon to show up on aprsisce. And suggestions would be great
|
||
|
|
||
|
Re: Aprs fi beacon
Greg D
I believe I heard that the iPhone app is only integrated with
aprs.fi, and doesn't actually forward information to the aprs-is
internet system itself (where aprsisce, other applications, and
iGates to RF would find it). There was a thread on it here
recently, if I recall correctly.
toggle quoted messageShow quoted text
Greg KO6TH Matthew Esposito
matthewr.esposito@... [aprsisce] wrote:
|
||
|
|
