Date   

Re: APRSIS for Android

Lynn Deffenbaugh
 

Please join the APRSISDR Yahoo group to discuss APRSISMO.  I'm trying to keep the discussions separate.

Reply back to me answers to the following questions:

Where did you get the APRSISMO.apk?

Do you get a hydra image overtop of a zero level map of the planet from OSM before it hangs?

Does your tablet have an internal GPS?

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 10/10/2016 3:03 PM, JoAnn Donaldson joannplano2005@... [aprsisce] wrote:
I downloaded and installed the APRSIS to my Toshiba Thrive Tablet. It installed but when I attempt to run it
all I get is a message that says wait or stop. If I click wait after a few seconds the msg reappears.

JoAnn Donaldson
AB8YZ



APRSIS for Android

JoAnn Donaldson
 

I downloaded and installed the APRSIS to my Toshiba Thrive Tablet. It installed but when I attempt to run it
all I get is a message that says wait or stop. If I click wait after a few seconds the msg reappears.

JoAnn Donaldson
AB8YZ


OuterNet

sbd sbd
 

Just ordered my OuterNet Receiver, I see it has just been shipped.
When it arrives I will see if I can connect it to APRSISCE32
See http://aprs.org/outnet.html for more info

Steve
G6UIM


Re: Proportional Pathing

Robert Bruninga
 

Proportional Pathing is primarily an advantage for mobile stations.  It gives them a 1 minute refresh rate in the short range direct area, and only every 2 minutes does a packet go via a digipeater, and only every 4 minutes does one go via 2 hops.  This Drastically cuts down the channel load while still preserving 1 minute rates close-by where mobiles see each other.  In that sense it is far better than smart beaconing not only for mobile-to-mobile awareness but also to lower channel loading.

Bob


On Sun, Oct 9, 2016 at 5:06 PM, kd0sml@... [aprsisce] <aprsisce@...> wrote:


I'm fairly new to APRS and am absorbing a little at a time. My latest study item is "proportional pathing". I see conversations about it from 2010 and 2011 but do not see support for it in APRSIS32. Is this (Proportional Pathing) something that may be implemented in APRSISCE/32 or should I forget about being able to play with it at some time n the future?


Thanks for all your efforts and for a great product!!!

Ron Elliott
KD0SML






Re: Proportional Pathing

Lynn Deffenbaugh
 

I don't even remember if I have it on the ToDo list.  There's lots of things more likely to appear in APRSISCE/32 than Proportional Pathing.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/9/2016 5:06 PM, kd0sml@... [aprsisce] wrote:

I'm fairly new to APRS and am absorbing a little at a time. My latest study item is "proportional pathing". I see conversations about it from 2010 and 2011 but do not see support for it in APRSIS32. Is this (Proportional Pathing) something that may be implemented in APRSISCE/32 or should I forget about being able to play with it at some time n the future?


Thanks for all your efforts and for a great product!!!

Ron Elliott
KD0SML




Proportional Pathing

kd0sml@...
 

I'm fairly new to APRS and am absorbing a little at a time. My latest study item is "proportional pathing". I see conversations about it from 2010 and 2011 but do not see support for it in APRSIS32. Is this (Proportional Pathing) something that may be implemented in APRSISCE/32 or should I forget about being able to play with it at some time n the future?


Thanks for all your efforts and for a great product!!!

Ron Elliott
KD0SML



Re: Changing Lat/Lon of a QRU

Anthony
 

Thanks Lynn

 
Regards,

Anthony (N2KI)








On Sun, Oct 9, 2016 at 11:34 AM, 'Lynn W Deffenbaugh (Mr)' kj4erj@... [aprsisce] <aprsisce@...> wrote:
 

To move an object, first center/follow the object.  Pan/zoom the map until you see where you want to put it.  Right click that location and select the Lat/Lon cascading menu.  From there, you should have an option to Move Xxxxxx HERE.


Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 10/9/2016 10:03 AM, 'Anthony (N2KI)' n2ki.ham@... [aprsisce] wrote:
How can I change the lat/lon of my QRU?

Do I have to recreate an object a center first then recode everything or is there an easier way?

Thanks
 
Regards,

Anthony (N2KI)










Re: Changing Lat/Lon of a QRU

Lynn Deffenbaugh
 

To move an object, first center/follow the object.  Pan/zoom the map until you see where you want to put it.  Right click that location and select the Lat/Lon cascading menu.  From there, you should have an option to Move Xxxxxx HERE.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 10/9/2016 10:03 AM, 'Anthony (N2KI)' n2ki.ham@... [aprsisce] wrote:
How can I change the lat/lon of my QRU?

Do I have to recreate an object a center first then recode everything or is there an easier way?

Thanks
 
Regards,

Anthony (N2KI)









Re: Changing Lat/Lon of a QRU

kc2ant@hotmail.com <kc2ant@...>
 

That is another way.

Get Outlook for Android




On Sun, Oct 9, 2016 at 11:03 AM -0400, "'Anthony (N2KI)' n2ki.ham@... [aprsisce]" <aprsisce@...> wrote:

 

I was able to do it by disabling the item, killing the item, and then recreating it.  

 
Regards,

Anthony (N2KI)








On Sun, Oct 9, 2016 at 11:01 AM, 'kc2ant@...' kc2ant@... [aprsisce] <aprsisce@...> wrote:
 

Do you know how to edit the XML file?

That's the only way that comes to mind at the moment, but I don't have the software in front of me at the moment

Adam
kc2ant

Get Outlook for Android




On Sun, Oct 9, 2016 at 10:04 AM -0400, "'Anthony (N2KI)' n2ki.ham@... [aprsisce]" <aprsisce@...> wrote:

 

How can I change the lat/lon of my QRU?

Do I have to recreate an object a center first then recode everything or is there an easier way?

Thanks
 
Regards,

Anthony (N2KI)









Re: Changing Lat/Lon of a QRU

Anthony
 

I was able to do it by disabling the item, killing the item, and then recreating it.  

 
Regards,

Anthony (N2KI)








On Sun, Oct 9, 2016 at 11:01 AM, 'kc2ant@...' kc2ant@... [aprsisce] <aprsisce@...> wrote:
 

Do you know how to edit the XML file?

That's the only way that comes to mind at the moment, but I don't have the software in front of me at the moment

Adam
kc2ant

Get Outlook for Android




On Sun, Oct 9, 2016 at 10:04 AM -0400, "'Anthony (N2KI)' n2ki.ham@... [aprsisce]" <aprsisce@...> wrote:

 

How can I change the lat/lon of my QRU?

Do I have to recreate an object a center first then recode everything or is there an easier way?

Thanks
 
Regards,

Anthony (N2KI)









Re: Changing Lat/Lon of a QRU

kc2ant@hotmail.com <kc2ant@...>
 

Do you know how to edit the XML file?

That's the only way that comes to mind at the moment, but I don't have the software in front of me at the moment

Adam
kc2ant

Get Outlook for Android




On Sun, Oct 9, 2016 at 10:04 AM -0400, "'Anthony (N2KI)' n2ki.ham@... [aprsisce]" <aprsisce@...> wrote:

 

How can I change the lat/lon of my QRU?

Do I have to recreate an object a center first then recode everything or is there an easier way?

Thanks
 
Regards,

Anthony (N2KI)








ar: (2)

Scott McKee <sbmckee@...>
 

































.................................
Emancipate yourselves from mental slavery, None _but ourselves can free our minds.
Drea Hilderbrandt


Re: do you like that stuff?

wackerman <wackerman@...>
 

Hi!

 

 

I thought you might like that stuff, just take a look, it is really cool http://marino.rossislove.com/e4twrn

 

Kind regards, wackerman

 


Re: KJ4ERJ offline

sbd sbd
 

I had issues with ANSRV and assumed from your message about the file etc,
that you had lost power.
Glad to hear all is ok

Steve
G6UIM

-----Original Message-----
From: aprsisce@yahoogroups.com [mailto:aprsisce@yahoogroups.com]
Sent: 07 October 2016 15:02
To: aprsisce@yahoogroups.com
Subject: Re: [aprsisce] KJ4ERJ offline

All is good here so far. I had shut everything down last night in
anticipation of a power loss sometime through the storm, but amazingly
(thanks to Florida Power and Light) our power is still on! I restarted
everything at 6:30am, but neglected to fire up the SATSRV which I just
did, so all should be running now.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 10/7/2016 6:46 AM, 'Steve' steve@daniels270.eclipse.co.uk [aprsisce]
wrote:
It looks like Lynn has lost power, so some things such as ANSRVR will not
be
working.
He did send me a file to get a backup system working, but I am not sure
where he sent it, to an old account probably.
I am hoping he can send again or point me to where it is.

Best of luck Lynn

Steve
G6UIM



------------------------------------
Posted by: "Steve" <steve@daniels270.eclipse.co.uk>
------------------------------------


------------------------------------

Yahoo Groups Links





------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links


Downloading was RE: I just received 2 awards!

sbd sbd
 

Downloading fine for me http://aprsisce.wikidot.com/downloads

 

Steve

G6UIM

 


From: aprsisce@... [mailto:aprsisce@...]
Sent: 07 October 2016 22:20
To: aprsisce@...
Subject: Re: [aprsisce] I just received 2 awards!

 

 

I cant get aprsis to down load.

 

Sent from Outlook


From: aprsisce@... <aprsisce@...> on behalf of Dick Smith w4rss@... [aprsisce] <aprsisce@...>
Sent: Friday, October 7, 2016 1:03:04 AM
To: aprsisce@...
Subject: Re: [aprsisce] I just received 2 awards!

 

 

On 10/06/2016 08:14 PM, 'Steve' steve@... [aprsisce] wrote:

 

First off I would like to thank Lynn KJ4ERJ. If he had not written
APRSISCE32 I would probably not be doing what I am.
When I first started using the software I was one of 3 people in the South
West of England to have an APRS system running. It took a while but things
have picked up a lot.
I realised quickly that the system would be very handy for emergency use in
our area, we have an area that is lovely (Dartmoor)in good weather, but good
turns to very bad in minutes.
I promoted the system by doing talks on APRS, and got asked by the Radio
Amateurs Emergency network (RAYNET) if I could provide a cross band APRS
system. Thanks to a couple of local Amateurs I managed to get a site that is
the highest in the area and used APRSISCE32 with 2 instances linked
together.
MB7VT-2 and -7
Encouraged by the response I set up GB7TQ and GB7IE repeaters, they can be
linked. And Priority is Emergency use.
I am working on getting local rescues group to use the system.

A huge thanks to Lynn for starting me on the trip
Steve
G6UIM
P.S> big thanks to my Grandfather into radio, and my dad for getting me into
clocks

Good going, Steve.  Congratulations.

Dick
W4RSS


Re: APRSISMO Release

JoAnn Donaldson
 

Downloaded the file to my Toshiba Tablet. It said it installed. I get an icon on the screen but when I attempt to execute it, I get a
blank screen then a small box that ask if I want to wait to stop the app. If I click wait, about a minute later I get the wait/stop box.

JoAnn Donaldson
AB8YZ


On Thursday, October 6, 2016 5:39 PM, "'Lynn W Deffenbaugh (Mr)' kj4erj@... [aprsisce]" wrote:


 
I've pushed out a new APRSISMO.apk that uses OpenStreetMap's tile
servers. My own tile server is likely going to be down for the next few
days as is my web server that normally distributes the .apk. The link
below should get you a copy directly from DropBox.

https://dl.dropboxusercontent.com/u/74000021/APRSISMO.apk

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

PS. I tried to push it into the APRSISDR Yahoo groups file section, but
their limit is 10MB.




Re: I just received 2 awards!

Dennie Dunkeson <wa7ypr@...>
 

I cant get aprsis to down load.


Sent from Outlook


From: aprsisce@... on behalf of Dick Smith w4rss@... [aprsisce]
Sent: Friday, October 7, 2016 1:03:04 AM
To: aprsisce@...
Subject: Re: [aprsisce] I just received 2 awards!
 
 

On 10/06/2016 08:14 PM, 'Steve' steve@... [aprsisce] wrote:
 

First off I would like to thank Lynn KJ4ERJ. If he had not written
APRSISCE32 I would probably not be doing what I am.
When I first started using the software I was one of 3 people in the South
West of England to have an APRS system running. It took a while but things
have picked up a lot.
I realised quickly that the system would be very handy for emergency use in
our area, we have an area that is lovely (Dartmoor)in good weather, but good
turns to very bad in minutes.
I promoted the system by doing talks on APRS, and got asked by the Radio
Amateurs Emergency network (RAYNET) if I could provide a cross band APRS
system. Thanks to a couple of local Amateurs I managed to get a site that is
the highest in the area and used APRSISCE32 with 2 instances linked
together.
MB7VT-2 and -7
Encouraged by the response I set up GB7TQ and GB7IE repeaters, they can be
linked. And Priority is Emergency use.
I am working on getting local rescues group to use the system.

A huge thanks to Lynn for starting me on the trip
Steve
G6UIM
P.S> big thanks to my Grandfather into radio, and my dad for getting me into
clocks

Good going, Steve.  Congratulations.

Dick
W4RSS


Re: KJ4ERJ offline

Randy Love
 

Here's hoping Matthew goes out to sea and doesn't u-turn and give you a round 2!

Good luck!

Randy
WF5X

On Fri, Oct 7, 2016 at 10:02 AM, 'Lynn W Deffenbaugh (Mr)' kj4erj@... [aprsisce] <aprsisce@...> wrote:
All is good here so far.  I had shut everything down last night in
anticipation of a power loss sometime through the storm, but amazingly
(thanks to Florida Power and Light) our power is still on!  I restarted
everything at 6:30am, but neglected to fire up the SATSRV which I just
did, so all should be running now.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32



On 10/7/2016 6:46 AM, 'Steve' steve@... [aprsisce]
wrote:
> It looks like Lynn has lost power, so some things such as ANSRVR will not be
> working.
> He did send me a file to get a backup system working, but I am not sure
> where he sent it, to an old account probably.
> I am hoping he can send again or point me to where it is.
>
> Best of luck Lynn
>
> Steve
> G6UIM
>
>
>
> ------------------------------------
> Posted by: "Steve" <steve@....uk>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
>



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/aprsisce/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/aprsisce/join
    (Yahoo! ID required)

<*> To change settings via email:
    aprsisce-digest@yahoogroups.com
    aprsisce-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    aprsisce-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Re: KJ4ERJ offline

Lynn Deffenbaugh
 

All is good here so far. I had shut everything down last night in anticipation of a power loss sometime through the storm, but amazingly (thanks to Florida Power and Light) our power is still on! I restarted everything at 6:30am, but neglected to fire up the SATSRV which I just did, so all should be running now.

Lynn (D) - KJ4ERJ - Author of APRSISCE for Windows Mobile and Win32

On 10/7/2016 6:46 AM, 'Steve' steve@daniels270.eclipse.co.uk [aprsisce] wrote:
It looks like Lynn has lost power, so some things such as ANSRVR will not be
working.
He did send me a file to get a backup system working, but I am not sure
where he sent it, to an old account probably.
I am hoping he can send again or point me to where it is.

Best of luck Lynn

Steve
G6UIM



------------------------------------
Posted by: "Steve" <steve@daniels270.eclipse.co.uk>
------------------------------------


------------------------------------

Yahoo Groups Links




KJ4ERJ offline

sbd sbd
 

It looks like Lynn has lost power, so some things such as ANSRVR will not be
working.
He did send me a file to get a backup system working, but I am not sure
where he sent it, to an old account probably.
I am hoping he can send again or point me to where it is.

Best of luck Lynn

Steve
G6UIM

6361 - 6380 of 36000